NTSCGERLWOEU 3.6/6 kV Flexible Submersible Cable

NTSCGERLWOEU 3.6/6 kV flexible submersible cable

TEBAOFLEX NTSCGERLWOEU cable is a flexible medium-voltage power cable for permanent operation in water where the route also requires added mechanical protection. The supplied 3 × 120 + 3 × 70/3E reference configuration has a galvanised steel-strand braid and rubber sheathing, helping procurement teams identify it as a protected water-duty construction rather than an ordinary flexible power cable.

This page is deliberately specific to the supplied 3.6/6 kV configuration. It records the available diameter range and approximate weight, while leaving unsupplied project limits—such as water depth, bending radius, current capacity and tensile load—to the approved cable drawing. That distinction matters: a cable can look suitably armoured on a reel yet still be wrong for the route, termination or earth-core arrangement.

• مناسبة ل: permanent water-operation duties requiring a flexible, mechanically protected medium-voltage cable.
• Reference size: 3 × 120 + 3 × 70/3E mm², with a 75–80 mm overall-diameter range.
• تأكيد قبل الطلب: installation route, water conditions, cable support, earth and pilot-core requirement, length and test documents.
• اختر بناء آخر عندما: the project needs a proven depth rating, a stated movement/reeling rating or electrical values not supplied for this configuration.

استكشف نطاق كابلات المضخات الغاطسة for other water-duty power-cable options. The technical details for this model are in the Construction, Applications, Specifications and Standards tabs.

NTSCGERLWOEU cable construction

The supplied NTSCGERLWOEU construction uses flexible class 5 stranded copper conductors, conductive rubber layers around 3GI3 rubber insulation, and a galvanised steel-strand braid. This layer sequence combines electrical field-control materials with added mechanical protection for the stated water-operation duty.

السيارات:

NTSCGERLWOEU is specified for permanent operation in water where the cable also needs additional mechanical protection. The supplied construction is relevant to submerged fixed-service power connections for equipment such as pumps, dredging equipment and similar water-duty installations where the final project design calls for a braided flexible medium-voltage cable.

Selection checks before ordering

• Confirm the required voltage, route length, termination system and whether optional pilot cores are needed.
• Confirm the 3 × 120 + 3 × 70/3E conductor arrangement against the connected equipment and earthing design.
• Define the installation path, support points and strain-relief arrangement; the steel braid provides mechanical protection but does not replace project-specific suspension or termination design.
• State water conditions, immersion depth, movement and any inspection or test-document requirement. These limits are not supplied for this specific configuration and must be reviewed for the quotation.

TEBAOFLEX can review the existing cable marking, conductor arrangement and installation duty before issuing a technical quotation, helping the buyer avoid ordering a similar-looking construction with a different earth or pilot-core layout.

المواصفات الفنية

The following values are the supplied reference data for the NTSCGERLWOEU 3.6/6 kV configuration. Confirm the final cable drawing and dimensions before release to production.

Ordering boundary

Only the 3 × 120 + 3 × 70/3E reference size, diameter range and approximate weight were supplied. Temperature limits, bending radius, tensile load, water depth, current capacity, resistance, test voltage and reeling speed were not supplied for this configuration, so they are not stated as product claims.

المرجع / العنصر

The supplied technical information identifies the following standard references for NTSCGERLWOEU. Include the required standard edition and any project-specific inspection or test documentation in the RFQ.

Confirm the required edition, final documentation and test requirements for the ordered cable configuration in the RFQ.