NSGAFOEU 1.8/3kV Medium Voltage Single-Core Cable

NSGAFOEU 1.8/3kV Medium Voltage Single-Core Cable is a TEBAOFLEX cable for the application and operating conditions identified in the original product record. These model distinctions should be preserved in the quotation, order confirmation, production marking and test documentation. A halogen-free compound or metallic screen changes the cable designation and should not be added as a generic NSGAFOEU attribute. The following figures are transcribed from the supplied 1.8/3 kV table. Minimum and maximum diameters help with conduit fill, gland selection, termination space, support cleats and routing clearance. Confirm final production dimensions for the selected cross-section before freezing equipment interfaces. Data check required: the 1 x 400 mm² row in the supplied image lists a 40.0 mm minimum diameter and a 34.6 mm maximum diameter. Because a minimum cannot exceed the maximum, this row should remain unpublished as a purchasable variation until the original datasheet or factory specification confirms both values. NSGAFOEU is a 1.8/3 kV medium-voltage single-core cable for protected fixed wiring and selected movable connections in railway vehicles, buses, pipes, enclosed ducts and switchgear. Its Class 5 tinned-copper conductor and rubber construction combine routing flexibility with a compact, mechanically protected power connection. The source record places this product in industrial cables. Before ordering, confirm the exact product variant, conductor or core arrangement, system rating, route conditions, equipment connection and required documentation against the project specification.

NSGAFOEU 1.8/3kV Medium Voltage Single-Core Cable construction

Costruzione del cavo

1. Conduttore: Flexible stranded tinned-copper wires, Class 5 according to DIN VDE 0295 / IEC 60228.
2. Inner conductor layer: A semiconducting layer is included in the 3.6/6 kV construction. This layer is not identified as part of the 1.8/3 kV build in the supplied diagram.
3. Isolamento: EPR rubber compound type 3GI3 or 3GJ3.
4. Guaina esterna: Chlorinated rubber compound type 5GM3, stated as oil-resistant and flame-retardant.

NSGAFOEU 1.8/3kV Medium Voltage Single-Core Cable applications

AC Single-Core Installation Considerations

• Keep circuit conductors together: Arrange all phases of an AC circuit in the specified trefoil or flat formation so their magnetic fields remain balanced and loop impedance is controlled.
• Avoid individual ferromagnetic entries: Do not pass each AC single-core phase separately through a closed steel gland plate or steel conduit without an approved non-magnetic arrangement. Alternating magnetic flux can cause eddy-current heating.
• Use equal phase lengths: Parallel or phase conductors should follow equivalent routes and have consistent lengths and terminations to limit current imbalance.
• Support dynamic connections correctly: A cable suitable for connecting movable parts is not automatically a continuous-reeling, drag-chain or torsion cable. Define the movement radius, frequency and restraint system before use.
• Check grouping and enclosure heat: Enclosed ducts, bundled single cores and crowded switchboards reduce heat dissipation. Apply the current-rating and derating rules for the actual installation.

Applicazioni

• Power wiring in railway and other track-bound vehicles
• Electrical connections in buses and trolley buses
• Internal connections in switchboards and distribution equipment
• Low-voltage circuits designed for inherently short-circuit and earth-fault-proof routing
• Protected installation in pipes, conduits and closed cable ducts
• Equipment and movable-part connections with a defined bending duty

Verifiche per la selezione

Prima della selezione definitiva, confermare l’interfaccia dell’attrezzatura, il metodo di installazione, la lunghezza del percorso, il tipo di movimento o flessione, l’esposizione ambientale, i requisiti dei conduttori o delle anime e la documentazione di progetto.

NSGAFOEU 1.8/3kV Medium Voltage Single-Core Cable specifications

Di seguito sono mantenute le note tecniche riportate nel documento di origine. Prima del rilascio, confermare dimensioni definitive, tolleranze, condizioni di installazione e configurazione ordinata.

NSGAFOEU 1.8/3kV Dimensions and Weight

The following figures are transcribed from the supplied 1.8/3 kV table. Minimum and maximum diameters help with conduit fill, gland selection, termination space, support cleats and routing clearance. Confirm final production dimensions for the selected cross-section before freezing equipment interfaces.

Data check required: the 1 x 400 mm² row in the supplied image lists a 40.0 mm minimum diameter and a 34.6 mm maximum diameter. Because a minimum cannot exceed the maximum, this row should remain unpublished as a purchasable variation until the original datasheet or factory specification confirms both values.

Tabelle tecniche del documento di origine

Le tabelle seguenti mantengono i dati originali del prodotto, comprese unità, intervalli ed esempi di ordinazione.

Attributi originali del prodotto

Questi attributi del prodotto sono mantenuti come forniti e devono essere verificati rispetto alla costruzione ordinata.

NSGAFOEU 1.8/3kV Medium Voltage Single-Core Cable standards and compliance

I seguenti riferimenti normativi sono ripresi dalla scheda prodotto originale. Identificano la base documentale e non sostituiscono i requisiti di certificazione o ispezione specifici del progetto.

• Conductor Standard DIN VDE 0295 / IEC 60228
• Standard DIN VDE 0250 Part 602
• Conductor: Flexible stranded tinned-copper wires, Class 5 according to DIN VDE 0295 / IEC 60228.
• NSGAFOEU DIN VDE 0250 Part 602 5GM3 chlorinated-rubber outer sheath; focus product on this page
• NSHXAFOE DIN VDE 0250 Part 606 HM3 halogen-free outer compound with low-smoke performance stated in the supplied data

Se il progetto richiede un rapporto di prova, un certificato, una registrazione della marcatura o un rilascio a seguito di ispezione, includere tale requisito nella richiesta di offerta.