UL 3232 Silicone Wire with Optional Nylon Cover, 105°C 300V
UL 3232 is a UL-certified 105°C, 300 V AC wire for totally enclosed appliance wiring. It uses tinned stranded copper with silicone-rubber insulation. An optional extruded nylon covering forms a separate outer layer; nylon is not a substitute for the silicone insulation.
- Voltan: 300 V AC
- Suhu: 105°C
- Penebat / lapisan luar: silicone rubber with optional nylon covering
- Pemilihan saiz: 26–16 AWG
- Pensijilan: AWM diperakui UL; UL 758
UL 3232 wire selection
UL 3232 is a UL-certified 105°C, 300 V AC wire for totally enclosed appliance wiring. It uses tinned stranded copper with silicone-rubber insulation. An optional extruded nylon covering forms a separate outer layer; nylon is not a substitute for the silicone insulation.
The six dimensioned configurations cover 26–16 AWG with a 0.44 mm nominal silicone wall and a 0.11 mm nylon covering. Finished diameters range from 1.59 mm to 2.60 mm. Each configuration identifies both layers so the purchaser can distinguish a nylon-covered lead from an uncovered silicone version before checking fit inside a harness or terminal enclosure.
The covering choice affects stripping preparation and the finished diameter used in assembly drawings. Include it explicitly when replacing an existing lead, particularly where an entry sleeve or terminal boot was selected around the covered construction. The 105°C rating should also remain visible in the equipment specification; the use of silicone insulation does not make this style interchangeable with higher-temperature silicone lead wires.
Lihat tab Spesifikasi untuk jadual model dan saiz. Terokai kategori Rangkaian kabel suhu tinggi for related constructions. Compare 150°C UL 3123 through the keluarga wayar sambungan silikon.
Binaan
UL 3232 uses the following conductor and insulation system. The diagram illustrates the layer sequence; select the conductor construction and covering shown in the required size specification.
| Komponen | Butiran binaan |
|---|---|
| Pengalir | Tinned stranded copper |
| Primary insulation | Getah silikon tersemperit |
| Optional outer covering | Extruded nylon; dimension table shows the covered version |
Aplikasi
UL 3232 is intended for appliance internal wiring inside a complete enclosure. The nylon-covered version can be specified where the assembly drawing requires that additional covering over silicone.
UL 3232 replacement selection
Untuk pertanyaan penggantian, berikan penandaan wayar sedia ada dan lukisan sambungan peralatan supaya pengalir, penebat dan susunan terminal dapat dipadankan.
Spesifikasi
| Parameter | Spesifikasi |
|---|---|
| Gaya UL | UL 3232 |
| Kadaran voltan | 300 V AC |
| Kadaran suhu | 105°C |
| Penebat / penutup | silicone rubber with optional nylon covering |
| Julat saiz pengalir | 26–16 AWG |
| Nominal silicone wall | 0.44 mm |
| Nominal nylon covering | 0.11 mm |
| Minimum average / point silicone wall | 15 / 13 mils |
| Minimum optional nylon wall at any point | 2 mils |
| Model dan saiz pengalir | Bilangan lembar konduktor (bil./mm) | Nominal silicone wall (mm) | Nylon cover (mm) | OD nominal / toleransi (mm) |
|---|---|---|---|---|
| UL 3232 16 AWG | 26/0.254 | 0.44 | 0.11 | 2.60 ± 0.10 |
| UL 3232 18 AWG | 34/0.18 | 0.44 | 0.11 | 2.32 ± 0.10 |
| UL 3232 20 AWG | 21/0.18 | 0.44 | 0.11 | 2.06 ± 0.10 |
| UL 3232 22 AWG | 17/0.16 | 0.44 | 0.11 | 1.87 ± 0.10 |
| UL 3232 24 AWG | 11/0.16 | 0.44 | 0.11 | 1.72 ± 0.10 |
| UL 3232 26 AWG | 7/0.16 | 0.44 | 0.11 | 1.59 ± 0.10 |
Pemilihan binaan yang ditetapkan
Specify UL 3232, AWG and whether the nylon covering is required. The listed diameters apply to the covered version; use a separate drawing for an uncovered construction.
Piawaian
TEBAOFLEX UL 3232 wire is UL-certified appliance wiring material.
| Perkara | Keperluan atau rujukan |
|---|---|
| Pensijilan | AWM diperakui UL |
| Penetapan gaya | UL 3232 |
| Piawaian binaan | UL 758 — Bahan Pendawaian Peralatan |
| Pengelasan nyalaan bagi gaya | Ujian nyalaan mendatar |
Nyatakan gaya UL, saiz pengalir serta penarafan voltan dan suhu dalam spesifikasi pembelian. Sertakan pengenalan produk dan dokumen pensijilan yang diperlukan bersama pertanyaan.
Minta cadangan kabel dan sebut harga
Hantar fungsi yang diperlukan, panjang kabel, keadaan tugas mekanikal, persekitaran, jenis penamatan dan kuantiti. Pasukan kami akan menilai aplikasi sebelum memberikan sebut harga.
- Sertakan nama produk atau SKU serta panjang kabel dan kuantiti yang diperlukan.
- Lampirkan spesifikasi, lukisan atau helaian data jika ada.