


UL 3232 Silicone Wire with Optional Nylon Cover, 105°C 300V
UL 3232 is a UL-certified 105°C, 300 V AC wire for totally enclosed appliance wiring. It uses tinned stranded copper with silicone-rubber insulation. An optional extruded nylon covering forms a separate outer layer; nylon is not a substitute for the silicone insulation.
- Spannung: 300 V AC
- Temperatur: 105°C
- Isolierung / Umhüllung: silicone rubber with optional nylon covering
- Größenauswahl: 26–16 AWG
- Zertifizierung: UL-zertifiziertes AWM; UL 758
UL 3232 wire selection
UL 3232 is a UL-certified 105°C, 300 V AC wire for totally enclosed appliance wiring. It uses tinned stranded copper with silicone-rubber insulation. An optional extruded nylon covering forms a separate outer layer; nylon is not a substitute for the silicone insulation.
The six dimensioned configurations cover 26–16 AWG with a 0.44 mm nominal silicone wall and a 0.11 mm nylon covering. Finished diameters range from 1.59 mm to 2.60 mm. Each configuration identifies both layers so the purchaser can distinguish a nylon-covered lead from an uncovered silicone version before checking fit inside a harness or terminal enclosure.
The covering choice affects stripping preparation and the finished diameter used in assembly drawings. Include it explicitly when replacing an existing lead, particularly where an entry sleeve or terminal boot was selected around the covered construction. The 105°C rating should also remain visible in the equipment specification; the use of silicone insulation does not make this style interchangeable with higher-temperature silicone lead wires.
Modell- und Größentabellen finden Sie auf der Registerkarte „Spezifikationen“. Sehen Sie sich die Kategorie Hochtemperaturkabel-Sortiment for related constructions. Compare 150°C UL 3123 through the Familie der Silikon-Anschlussleitungen.
Aufbau
UL 3232 uses the following conductor and insulation system. The diagram illustrates the layer sequence; select the conductor construction and covering shown in the required size specification.

| Bestandteil | Aufbaudetail |
|---|---|
| Leiter | Tinned stranded copper |
| Primary insulation | Extrudierter Silikonkautschuk |
| Optional outer covering | Extruded nylon; dimension table shows the covered version |
Anwendungen
UL 3232 is intended for appliance internal wiring inside a complete enclosure. The nylon-covered version can be specified where the assembly drawing requires that additional covering over silicone.

UL 3232 replacement selection
Geben Sie bei Ersatzanfragen die Kennzeichnung der vorhandenen Leitung und den Anschlussplan des Geräts an, damit Leiter, Isolierung und Klemmenanordnung abgeglichen werden können.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| UL-Stil | UL 3232 |
| Nennspannung | 300 V AC |
| Temperaturbemessung | 105°C |
| Isolierung / Umhüllung | silicone rubber with optional nylon covering |
| Abgedeckter Leitergrößenbereich | 26–16 AWG |
| Nominal silicone wall | 0.44 mm |
| Nominal nylon covering | 0.11 mm |
| Minimum average / point silicone wall | 15 / 13 mils |
| Minimum optional nylon wall at any point | 2 mils |
| Modell und Leitergröße | Litzenanzahl (Anz./mm) | Nominal silicone wall (mm) | Nylon cover (mm) | Nenn-Außendurchmesser / Toleranz (mm) |
|---|---|---|---|---|
| UL 3232 16 AWG | 26/0.254 | 0.44 | 0.11 | 2.60 ± 0.10 |
| UL 3232 18 AWG | 34/0.18 | 0.44 | 0.11 | 2.32 ± 0.10 |
| UL 3232 20 AWG | 21/0.18 | 0.44 | 0.11 | 2.06 ± 0.10 |
| UL 3232 22 AWG | 17/0.16 | 0.44 | 0.11 | 1.87 ± 0.10 |
| UL 3232 24 AWG | 11/0.16 | 0.44 | 0.11 | 1.72 ± 0.10 |
| UL 3232 26 AWG | 7/0.16 | 0.44 | 0.11 | 1.59 ± 0.10 |
Auswahl der spezifizierten Ausführung
Specify UL 3232, AWG and whether the nylon covering is required. The listed diameters apply to the covered version; use a separate drawing for an uncovered construction.
Normen
TEBAOFLEX UL 3232 wire is UL-certified appliance wiring material.
| Merkmal | Anforderung oder Referenz |
|---|---|
| Zertifizierung | UL-zertifiziertes AWM |
| Stilbezeichnung | UL 3232 |
| Konstruktionsnorm | UL 758 — Verdrahtungsmaterial für Geräte |
| Flammklassifizierung des Stils | Horizontale Flammprüfung |
Geben Sie in der Einkaufsspezifikation den UL-Stil, die Leitergröße sowie Spannungs- und Temperaturklasse an. Fügen Sie der Anfrage die erforderliche Produktkennzeichnung und Zertifizierungsunterlagen bei.
Kabelempfehlung und Angebot anfordern
Senden Sie die benötigten Funktionen, Kabellänge, mechanische Beanspruchung, Umgebung, Anschlussausführung und Menge. Unser Team prüft die Anwendung vor der Angebotserstellung.
- Geben Sie den Produktnamen oder die SKU sowie die benötigte Kabellänge und Menge an.
- Fügen Sie nach Möglichkeit eine Spezifikation, Zeichnung oder ein Datenblatt bei.

