UL 3123 Silicone Hook-Up Wire, 150°C 600V
UL 3123 is a UL-certified silicone hook-up wire rated 150°C and 600 V AC for internal wiring. Its stranded copper conductor and silicone insulation provide a defined construction for appliance leads that specify this temperature and voltage combination.
- Voltan: 600 V AC
- Suhu: 150°C
- Penebat / lapisan luar: extruded silicone rubber
- Pemilihan saiz: 30–16 AWG
- Pensijilan: AWM diperakui UL; UL 758
UL 3123 wire selection
UL 3123 is a UL-certified silicone hook-up wire rated 150°C and 600 V AC for internal wiring. Its stranded copper conductor and silicone insulation provide a defined construction for appliance leads that specify this temperature and voltage combination.
The complete dimension table covers eight sizes from 30 AWG to 16 AWG. The nominal silicone wall remains 0.82 mm throughout that range, while the finished diameter increases from 1.95 mm to 3.14 mm. This makes it possible to compare conductor sizes without losing sight of the space needed around the insulated lead. Stranding is listed for each row to support terminal and stripping-tool selection.
Allow a bend radius of 10 times the finished diameter for the listed construction and check the route at the equipment entry. For a replacement lead, confirm that 150°C is the required grade rather than assuming every silicone wire has a 200°C rating. Installation flexibility should also be distinguished from repeated movement in service; moving machinery requires its own cable-duty assessment.
Lihat tab Spesifikasi untuk jadual model dan saiz. Terokai kategori Rangkaian kabel suhu tinggi for related constructions. Use the keluarga wayar sambungan silikon for the wider temperature and voltage comparison.
Binaan
UL 3123 uses the following conductor and insulation system. The diagram illustrates the layer sequence; select the conductor construction and covering shown in the required size specification.
| Komponen | Butiran binaan |
|---|---|
| Pengalir | Stranded copper |
| Penebat | Getah silikon tersemperit |
| Binaan | Pengalir tunggal berpenebat |
Aplikasi
UL 3123 is intended for internal appliance and equipment connections requiring 150°C, 600 V silicone insulation. Keep the lead supported and provide bend space at terminal blocks and enclosure entries.
UL 3123 replacement selection
Untuk pertanyaan penggantian, berikan penandaan wayar sedia ada dan lukisan sambungan peralatan supaya pengalir, penebat dan susunan terminal dapat dipadankan.
Spesifikasi
| Parameter | Spesifikasi |
|---|---|
| Gaya UL | UL 3123 |
| Kadaran voltan | 600 V AC |
| Kadaran suhu | 150°C |
| Penebat / penutup | extruded silicone rubber |
| Julat saiz pengalir | 30–16 AWG |
| Nominal silicone wall | 0.82 mm |
| Purata minimum / dinding titik | 30 / 27 mils |
| Bending radius for listed construction | 10 × finished OD |
| Model dan saiz pengalir | Bilangan lembar konduktor (bil./mm) | Nominal silicone wall (mm) | OD nominal / toleransi (mm) |
|---|---|---|---|
| UL 3123 16 AWG | 26/0.254 | 0.82 | 3.14 ± 0.10 |
| UL 3123 18 AWG | 34/0.18 | 0.82 | 2.86 ± 0.10 |
| UL 3123 20 AWG | 21/0.18 | 0.82 | 2.60 ± 0.10 |
| UL 3123 22 AWG | 17/0.16 | 0.82 | 2.41 ± 0.10 |
| UL 3123 24 AWG | 11/0.16 | 0.82 | 2.26 ± 0.10 |
| UL 3123 26 AWG | 7/0.16 | 0.82 | 2.13 ± 0.10 |
| UL 3123 28 AWG | 7/0.127 | 0.82 | 2.03 ± 0.10 |
| UL 3123 30 AWG | 7/0.10 | 0.82 | 1.95 ± 0.10 |
Pemilihan binaan yang ditetapkan
Specify UL 3123 with the AWG, strand construction and finished diameter from the table. Use the listed 10 × OD bend radius when checking the selected route.
Piawaian
TEBAOFLEX UL 3123 wire is UL-certified appliance wiring material.
| Perkara | Keperluan atau rujukan |
|---|---|
| Pensijilan | AWM diperakui UL |
| Penetapan gaya | UL 3123 |
| Piawaian binaan | UL 758 — Bahan Pendawaian Peralatan |
| Pengelasan nyalaan bagi gaya | Ujian nyalaan mendatar |
Nyatakan gaya UL, saiz pengalir serta penarafan voltan dan suhu dalam spesifikasi pembelian. Sertakan pengenalan produk dan dokumen pensijilan yang diperlukan bersama pertanyaan.
Minta cadangan kabel dan sebut harga
Hantar fungsi yang diperlukan, panjang kabel, keadaan tugas mekanikal, persekitaran, jenis penamatan dan kuantiti. Pasukan kami akan menilai aplikasi sebelum memberikan sebut harga.
- Sertakan nama produk atau SKU serta panjang kabel dan kuantiti yang diperlukan.
- Lampirkan spesifikasi, lukisan atau helaian data jika ada.