UL 10485 Thin PFA Wire, 250°C 600V
UL 10485 is a UL-certified PFA equipment wire rated 250°C and 600 V AC. This page covers small-gauge single-conductor constructions for internal appliance and electronic wiring, including separate solid and stranded 28 AWG options.
- Voltan: 600 V AC
- Suhu: 250°C
- Penebat / lapisan luar: PFA yang diekstrusi
- Pemilihan saiz: 30–20 AWG dalam jadual dimensi
- Pensijilan: AWM diperakui UL; UL 758
UL 10485 wire selection
UL 10485 is a UL-certified PFA equipment wire rated 250°C and 600 V AC. This page covers small-gauge single-conductor constructions for internal appliance and electronic wiring, including separate solid and stranded 28 AWG options.
The dimension table runs from 30 AWG to 20 AWG with a nominal 0.20 mm PFA wall and a 0.15 mm minimum wall. Finished diameters, conductor construction and resistance at 20°C appear together so a buyer can check both electrical sizing and assembly fit. The conductor construction matters even where two catalogue rows show the same nominal finished diameter: a solid wire and a stranded wire require different handling and termination checks.
For a compact 600 V harness, start with the required conductor size and then review the available terminal opening and strip length. Include the conductor finish in the specification when the lead will operate close to 250°C. A temperature rating on the insulation cannot compensate for a terminal or adjacent component selected for a lower temperature.
Lihat tab Spesifikasi untuk jadual model dan saiz. Terokai kategori Rangkaian kabel suhu tinggi for related constructions. Compare the larger-gauge UL 10503 and the Keluarga wayar PFA.
Binaan
UL 10485 uses the following conductor and insulation system. The diagram illustrates the layer sequence; select the conductor construction and covering shown in the required size specification.
| Komponen | Butiran binaan |
|---|---|
| Pengalir | Kuprum; binaan kosong atau bersalut dipilih untuk suhu dan penamatan |
| Penebat | PFA Tersemperit |
| Binaan | Pengalir tunggal berpenebat |
Aplikasi
UL 10485 is used for internal wiring of appliances or electronic equipment where the specified PFA construction, conductor size and temperature rating match the circuit.
UL 10485 replacement selection
Untuk pertanyaan penggantian, berikan penandaan wayar sedia ada dan lukisan sambungan peralatan supaya pengalir, penebat dan susunan terminal dapat dipadankan.
Spesifikasi
| Parameter | Spesifikasi |
|---|---|
| Gaya UL | UL 10485 |
| Kadaran voltan | 600 V AC |
| Kadaran suhu | 250°C |
| Penebat / penutup | PFA yang diekstrusi |
| Julat saiz pengalir | 30–20 AWG dalam jadual dimensi |
| Suhu rujukan rintangan | 20°C |
| Unit dimensi | mm |
| Toleransi diameter untaian dalam jadual | ±0.005 mm |
| Dinding PFA nominal / minimum | 0.20 / 0.15 mm |
Dimensi dan rintangan adalah nilai katalog nominal untuk pembinaan yang disenaraikan. Versi pepejal dan berbilang lembar mesti dinyatakan secara berasingan. Gunakan lukisan yang dipersetujui untuk toleransi penamatan.
| Model dan saiz pengalir | Bilangan lembar konduktor (bil./mm) | Diameter pengalir (mm) | Dinding nominal (mm) | Dinding minimum (mm) | OD nominal / toleransi (mm) | Rintangan pengalir pada 20°C (Ω/km) |
|---|---|---|---|---|---|---|
| UL 10485 20 AWG | 7/0.3 | 0.92 | 0.20 | 0.15 | 1.36 ±0.10 | 36.70 |
| UL 10485 22 AWG | 19/0.15 | 0.76 | 0.20 | 0.15 | 1.15 ±0.10 | 59.40 |
| UL 10485 24 AWG | 7/0.20 | 0.61 | 0.20 | 0.15 | 1.00 ±0.10 | 94.20 |
| UL 10485 26 AWG | 7/0.16 | 0.49 | 0.20 | 0.15 | 0.88 ±0.10 | 150.00 |
| UL 10485 28 AWG solid | 1/0.32 | 0.32 | 0.20 | 0.15 | 0.72 ±0.10 | 227.00 |
| UL 10485 28 AWG stranded | 7/0.127 | 0.39 | 0.20 | 0.15 | 0.72 ±0.10 | 227.00 |
| UL 10485 30 AWG | 1/0.254 | 0.254 | 0.20 | 0.15 | 0.66 ±0.10 | 361.00 |
Pemilihan binaan yang ditetapkan
State UL 10485, AWG and solid or stranded construction on the enquiry. Check the conductor finish, finished diameter and strip dimensions before substituting another PFA style.
For tight-clearance connections, use the agreed finished-diameter drawing: nominal conductor diameter and nominal wall values in the table do not always sum exactly to the listed outside diameter.
Piawaian
TEBAOFLEX UL 10485 wire is UL-certified appliance wiring material.
| Perkara | Keperluan atau rujukan |
|---|---|
| Pensijilan | AWM diperakui UL |
| Penetapan gaya | UL 10485 |
| Piawaian binaan | UL 758 — Bahan Pendawaian Peralatan |
| Pengelasan nyalaan bagi gaya | Ujian nyalaan mendatar |
Nyatakan gaya UL, saiz pengalir serta penarafan voltan dan suhu dalam spesifikasi pembelian. Sertakan pengenalan produk dan dokumen pensijilan yang diperlukan bersama pertanyaan.
Minta cadangan kabel dan sebut harga
Hantar fungsi yang diperlukan, panjang kabel, keadaan tugas mekanikal, persekitaran, jenis penamatan dan kuantiti. Pasukan kami akan menilai aplikasi sebelum memberikan sebut harga.
- Sertakan nama produk atau SKU serta panjang kabel dan kuantiti yang diperlukan.
- Lampirkan spesifikasi, lukisan atau helaian data jika ada.