NSHCGEÖU KON+ST+UL 0.6/1 kV Monitored Tunnel Cable

NSHCGEÖU KON+ST+UL is a 0.6/1 kV monitored tunnel cable for mobile coal-cutting and loading machines operating under high mechanical load. The supplied technical specification describes three tinned-copper power cores with 3GI3 EPR and semiconductive rubber insulation, control and monitoring cores, a double concentric arrangement, a GM1b inner sheath, a flexible helix of tinned copper and galvanized steel wires, and a yellow or red 5GM5 elastomer outer sheath. The concentric phase-monitoring screen and overall concentric earth conductor support insulation-fault and damage monitoring when connected to suitable equipment. The source lists 3 kV main-core testing, 2 kV control-core testing, 90 °C conductor operation, 250 °C short-circuit temperature, fixed service from −40 °C to +90 °C and mobile service from −25 °C to +90 °C. UL certification has been obtained, as confirmed for this product; the certificate record and scope should be supplied when required by the project. The page keeps the source configurations together so buyers can request one product while specifying the precise conductor arrangement and monitoring circuit needed for their machine. Confirm the KON/ST/UL core arrangement, monitoring interface, route, termination, mechanical load and final size with TEBAOFLEX.

NSHCGEÖU KON+ST+UL construction

The supplied construction is built around three power cores with double concentric control and monitoring cores. A concentric phase-monitoring screen and overall concentric earth conductor support insulation-fault and damage monitoring when used with suitable equipment.

The monitoring and earth-conductor arrangement is a selection feature, not a substitute for the monitoring relay or protection-system design. Confirm core functions and termination continuity requirements before quotation.

Applications for NSHCGEÖU KON+ST+UL

The source positions this 0.6/1 kV monitored tunnel cable for mobile machines under very high mechanical load, especially coal-cutting and loading machines in mines. It also lists appliances, devices and auxiliary electrical circuits.

• Mobile coal-cutting and loading machines with the stated monitoring/earth arrangement
• Appliances, devices and auxiliary electrical circuits in demanding mining and tunnel environments
• Installations where a concentric phase-monitoring screen and overall earth conductor are connected to suitable monitoring equipment
• Confirm site classification, monitoring interface, core schedule, termination, S-type changes and mechanical load before ordering

The source provides fixed and mobile temperature windows and a 20 × D S-type distance reference. Apply the project installation drawing and equipment protection requirements to the final selection.

NSHCGEÖU KON+ST+UL specifications

The following values are transcribed from the supplied two-page technical specification. The source lists two rows with the same nominal 3 × 70/35 KON configuration but different diameter and weight values; both rows are retained and the final construction must be confirmed before quotation.

NSHCGEÖU KON+ST+UL standards and certification

The following standard references are taken from the supplied technical specification. The UL certification status is included because it was expressly confirmed for this product by the user.

Provide the applicable UL certificate record and project acceptance scope with the RFQ when required. The public page does not invent a certificate number or approval scope.