UL 3645 Covered Silicone Wire, 200°C 1000V
UL 3645 is a UL-certified covered silicone wire rated 1000 V AC, with 150°C and 200°C constructions. The version shown here adds a fiberglass braid over the silicone insulation for internal appliance or electronic equipment wiring.
- Voltan: 1000 V AC
- Suhu: 150°C or 200°C by construction
- Penebat / lapisan luar: silicone rubber with a supplied glass-braid covering
- Pemilihan saiz: 30 AWG–750 kcmil style range; table: 30 AWG–4/0 AWG
- Pensijilan: AWM diperakui UL; UL 758
UL 3645 wire selection
UL 3645 is a UL-certified covered silicone wire rated 1000 V AC, with 150°C and 200°C constructions. The version shown here adds a fiberglass braid over the silicone insulation for internal appliance or electronic equipment wiring.
The 19-row size table spans 30 AWG through 4/0 AWG and identifies the nominal silicone wall, 0.16 mm glass covering and finished diameter for each listed construction. The outer braid is part of the finished size, so it must be included when checking sleeves, clamps and terminal entries. The separate style schedule covers additional conductor groups up to 750 kcmil without assigning unverified finished diameters to them.
Select the temperature grade and covering before comparing this wire with an uncovered silicone lead. The same AWG and voltage can still lead to a different outside diameter and stripping procedure. For the listed constructions, allow a bend radius of 10 times finished diameter and support the lead so the braid does not rub against sharp equipment edges.
Lihat tab Spesifikasi untuk jadual model dan saiz. Terokai kategori Rangkaian kabel suhu tinggi for related constructions. Compare bare UL 3644 and the lower-voltage keluarga wayar silikon jalinan.
Binaan
UL 3645 uses the following conductor and insulation system. The diagram illustrates the layer sequence; select the conductor construction and covering shown in the required size specification.
| Komponen | Butiran binaan |
|---|---|
| Pengalir | Solid or stranded copper; dimensioned examples are stranded |
| Penebat | Getah silikon tersemperit |
| Lapisan luar | Fiberglass braid; 0.16 mm in dimensioned examples |
Aplikasi
UL 3645 is used for internal appliance and electronic equipment wiring that specifies a covering over silicone insulation. Review the braid finish and termination arrangement where the covering ends near a connector.
UL 3645 replacement selection
Untuk pertanyaan penggantian, berikan penandaan wayar sedia ada dan lukisan sambungan peralatan supaya pengalir, penebat dan susunan terminal dapat dipadankan.
Spesifikasi
| Parameter | Spesifikasi |
|---|---|
| Gaya UL | UL 3645 |
| Kadaran voltan | 1000 V AC |
| Kadaran suhu | 150°C or 200°C by construction |
| Penebat / penutup | silicone rubber with a supplied glass-braid covering |
| Julat saiz pengalir | 30 AWG–750 kcmil style range; table: 30 AWG–4/0 AWG |
| Bending radius for listed construction | 10 × finished OD |
Nominal dimensions follow the listed conductor constructions. Confirm the agreed finished-diameter drawing for tight-clearance assemblies.
| Model dan saiz pengalir | Bilangan lembar konduktor (bil./mm) | Nominal silicone wall (mm) | Glass covering (mm) | OD nominal / toleransi (mm) |
|---|---|---|---|---|
| UL 3645 4/0 AWG | 2146/0.254 | 2.09 | 0.16 | 18.09 ±0.15 |
| UL 3645 3/0 AWG | 1615/0.254 | 2.09 | 0.16 | 16.30 ±0.15 |
| UL 3645 2/0 AWG | 1330/0.254 | 2.09 | 0.16 | 15.20 ±0.15 |
| UL 3645 1/0 AWG | 1026/0.254 | 2.09 | 0.16 | 13.90 ±0.15 |
| UL 3645 2 AWG | 665/0.254 | 1.58 | 0.16 | 11.05 ±0.15 |
| UL 3645 4 AWG | 420/0.254 | 1.58 | 0.16 | 9.50 ±0.15 |
| UL 3645 6 AWG | 259/0.254 | 1.58 | 0.16 | 8.21 ±0.15 |
| UL 3645 8 AWG | 161/0.254 | 1.58 | 0.16 | 7.20 ±0.15 |
| UL 3645 10 AWG | 105/0.254 | 1.20 | 0.16 | 5.73 ±0.15 |
| UL 3645 12 AWG | 65/0.254 | 1.20 | 0.16 | 5.09 ±0.15 |
| UL 3645 14 AWG | 41/0.254 | 1.20 | 0.16 | 4.60 ±0.15 |
| UL 3645 16 AWG | 26/0.254 | 1.20 | 0.16 | 4.22 ±0.15 |
| UL 3645 18 AWG | 34/0.18 | 1.20 | 0.16 | 3.94 ±0.15 |
| UL 3645 20 AWG | 21/0.18 | 1.20 | 0.16 | 3.68 ±0.15 |
| UL 3645 22 AWG | 17/0.16 | 1.20 | 0.16 | 3.49 ±0.15 |
| UL 3645 24 AWG | 11/0.16 | 1.20 | 0.16 | 3.34 ±0.15 |
| UL 3645 26 AWG | 7/0.16 | 1.20 | 0.16 | 3.21 ±0.15 |
| UL 3645 28 AWG | 7/0.127 | 1.20 | 0.16 | 3.11 ±0.15 |
| UL 3645 30 AWG | 7/0.10 | 1.20 | 0.16 | 3.03 ±0.15 |
Style construction thicknesses are shown in mils; 1 mil = 0.0254 mm. Nominal finished dimensions are listed separately.
| Model and conductor group | Minimum average silicone wall (mils) | Minimum point wall (mils) |
|---|---|---|
| UL 3645 30–10 AWG | 45 | 40 |
| UL 3645 8–2 AWG | 60 | 54 |
| UL 3645 1–4/0 AWG | 80 | 72 |
| UL 3645 250–500 kcmil | 95 | 85 |
| UL 3645 501–750 kcmil | 110 | 99 |
Pemilihan binaan yang ditetapkan
Specify UL 3645 with size, temperature grade and fiberglass covering. Match the covered finished diameter to clamps and sleeves instead of using a bare-silicone dimension.
Piawaian
TEBAOFLEX UL 3645 wire is UL-certified appliance wiring material.
| Perkara | Keperluan atau rujukan |
|---|---|
| Pensijilan | AWM diperakui UL |
| Penetapan gaya | UL 3645 |
| Piawaian binaan | UL 758 — Bahan Pendawaian Peralatan |
| Pengelasan nyalaan bagi gaya | Ujian nyalaan mendatar |
Nyatakan gaya UL, saiz pengalir serta penarafan voltan dan suhu dalam spesifikasi pembelian. Sertakan pengenalan produk dan dokumen pensijilan yang diperlukan bersama pertanyaan.
Minta cadangan kabel dan sebut harga
Hantar fungsi yang diperlukan, panjang kabel, keadaan tugas mekanikal, persekitaran, jenis penamatan dan kuantiti. Pasukan kami akan menilai aplikasi sebelum memberikan sebut harga.
- Sertakan nama produk atau SKU serta panjang kabel dan kuantiti yang diperlukan.
- Lampirkan spesifikasi, lukisan atau helaian data jika ada.