UL 5334 & UL 5335 Mica-Glass Wire, 450°C 300/600V

UL 5334 / UL 5335 wire selection

UL 5334 and UL 5335 are UL-certified mica-glass wires for high-temperature internal equipment connections at 450°C. UL 5334 is the 300 V AC construction, while UL 5335 is the 600 V AC construction. Both use a stranded nickel-coated copper conductor, mica-glass insulation and a treated fiberglass braid.

Separate size tables keep the voltage choices clear. UL 5334 dimensions cover 24–14 AWG, and UL 5335 dimensions cover 22–8 AWG. Each row includes strand count, outside diameter, approximate weight and minimum bend radius. These values let a buyer compare the two constructions at a shared AWG without assuming that the thicker voltage construction will fit the same entry or terminal arrangement.

For ovens and similar hot equipment, consider both the hot-zone temperature and the mechanical protection along the wire route. The insulation system needs a supported installation, and the conductor size still depends on the complete circuit and thermal conditions. A 450°C rating alone is not a current-carrying-capacity calculation or a basis for replacing one voltage grade with another.

راجع تبويب المواصفات للاطلاع على جداول الطرازات والمقاسات. وتصفح فئة مجموعة كابلات درجات الحرارة العالية للاطلاع على الإنشاءات ذات الصلة. قارن MGT mica-glass wire for the existing 5107/5128 mica-tape product rather than treating the constructions as certified equivalents.

التركيب

UL 5334 / UL 5335 uses the following conductor and insulation system. The diagram illustrates the layer sequence; select the conductor construction and covering shown in the required size specification.

التطبيقات

UL 5334 and UL 5335 are used for internal wiring in ovens and similar high-temperature equipment where protected from mechanical abuse. Choose the 300 V or 600 V construction before checking the required conductor size.

UL 5334 / UL 5335 replacement selection

لطلب سلك بديل، أرسل علامة السلك الحالي ومخطط توصيل المعدات حتى يمكن مطابقة الموصل والعزل وترتيب الأطراف.

المواصفات الفنية

اختيار البنية المحددة

State UL 5334 or UL 5335 explicitly with AWG, conductor construction and required voltage. Use the corresponding table for OD, weight and bend radius.

المعايير

TEBAOFLEX UL 5334 / UL 5335 wire is UL-certified appliance wiring material.

حدّد نمط UL ومقاس الموصل وجهد التشغيل ودرجة الحرارة في مواصفة الشراء. وأرفق بالاستفسار تعريف المنتج ووثائق الاعتماد المطلوبة.

UL 5334 identifies the 300 V construction and UL 5335 identifies the 600 V construction. Keep the two styles separate on drawings and orders.