Type 633 / 633-ECC 19/33 kV Mining Cable
Type 633 / 633-ECC mining cable is a 19/33 kV screened medium-voltage cable for reeling, section feeders and open-cast mobile equipment.
- 25–120 mm² power-conductor range in the Type 633 tables
- Three individually screened flexible power cores
- Three insulated EPM pilot cores in the standard construction
- 633-ECC option replaces one pilot core with a tinned conductor
- Triple-extruded EPR, nylon/tinned-copper braid and CR polychloroprene sheath
- −25 °C to +90 °C; minimum bending radius listed as 9 × overall diameter
State the standard or ECC option, conductor area and cable-management duty when requesting a quotation.
Type 633 mining cable for 19/33 kV reeling and section feeders
Type 633 mining cable is a medium-voltage screened cable family rated 19/33 kV for electrically driven machines, movable and portable electric apparatus, section feeders and the open-cast mining equipment listed in the supplied SANS datasheet. It is a practical starting point for procurement teams comparing dragline, shovel, drill and other large mobile-equipment connections where a higher-voltage cable schedule and cable-management method must be reviewed together.
The standard Type 633 arrangement uses three individually screened flexible power cores laid up with three insulated pilot cores. Each power core uses Class 5 tinned annealed copper and triple-extruded EPR with a strippable semi-conducting screen. The source also defines a 633-ECC option: one pilot core is replaced with a tinned conductor. Nylon/tinned-copper braid, CR polychloroprene sheathing and open nylon reinforcement complete the listed construction.
Select Type 633 or 633-ECC according to the equipment earthing and monitoring design, then match conductor area, reeling route, termination, cable length and handling equipment. Specifications preserves the separate dimensional, ECC, electrical and service tables from the PDF. For adjacent voltage and construction comparisons, visit the Câbles miniers et de tunnelage category and use the related products below; the RFQ should state whether the ECC conductor is required.
Type 633 and 633-ECC screened MV construction
Type 633 uses individually screened medium-voltage power cores laid up with three insulated pilot cores. The ECC designation changes the monitoring/earth arrangement by replacing one pilot core with a tinned conductor; that choice should remain visible in the equipment and termination schedule.
| Paramètre | Valeur indiquée dans la source |
|---|---|
| Conducteur | cuivre étamé recuit souple multibrins de classe 5 |
| Isolation | EPR thermosetting compound with strippable semi-conducting core screen, triple extruded |
| Power-core screen | Each power core individually screened with tinned copper / textile braid |
| noyaux pilotes | Three pilot cores insulated with EPM in the standard Type 633 construction |
| ECC option | One pilot core replaced with a tinned conductor |
| Renforcement | Open nylon braid, minimum 16 strings |
| Gaine | CR polychloroprene rubber inner and black outer sheath |
The cross-section distinguishes the power, pilot and ECC paths visually; use the original PDF tables and cable schedule to approve the selected core area, screen data, dimensions and mass.
Type 633 for high-voltage mobile mining connections
Type 633 is the higher-voltage option in this two-product set. Its source application combines portable and movable equipment with section-feeder duty, and names open-cast machines where reeling and cable handling are part of the installation brief.
- Medium-sized draglines, shovels and drills in open-cast mining as listed by the source
- Portable electric apparatus and section feeders requiring the 19/33 kV rating
- Reeling purposes and other industrial applications covered by the supplied datasheet
- Equipment interfaces where the standard three-pilot design or 633-ECC tinned-conductor option must be selected explicitly
- Before ordering, confirm reel/guide layout, termination geometry, cable length, earth-fault scheme and the machine supply voltage
The PDF lists a 9 × overall-diameter minimum bending radius and tabled maximum tension values, but it does not state a reeling speed or dynamic service life. Treat those as project engineering inputs rather than generic Type 633 claims.
Type 633 / 633-ECC 19/33 kV Mining Cable technical data
The dimensional, electrical and service values below are transcribed from the supplied PDF for Type 633 mining cable. Tables remain separated by the construction or service section used in the source, so the applicable row can be matched to the equipment schedule without inventing a merged product range.
Use the source-listed conductor area, core dimensions, overall diameter, mass and electrical values together. Where the PDF gives a bending, tension, current or short-circuit value, it remains in the table; where it does not, no universal project rating is added.
TYPE 633 DIMENSIONS
| Cond. size mm2 | Power wire dia. mm | Power cond. dia. mm | Screen wire dia. mm | Pilot size mm2 | Pilot wire dia. mm | Pilot cond. dia. mm | Max tension kN | Overall dia. mm | Masse kg/km |
|---|---|---|---|---|---|---|---|---|---|
| 25 | 0.41 | 6.8 | 0.31 | 16 | 0.41 | 4.2 | 1.1 | 71.3 | 720 |
| 35 | 0.41 | 8.5 | 0.31 | 16 | 0.41 | 4.2 | 1.6 | 73.5 | 780 |
| 50 | 0.41 | 10.3 | 0.31 | 16 | 0.41 | 4.2 | 2.3 | 77.8 | 890 |
| 70 | 0.51 | 11.9 | 0.31 | 16 | 0.41 | 4.2 | 3.2 | 83.0 | 1030 |
| 95 | 0.51 | 13.5 | 0.31 | 16 | 0.41 | 4.2 | 4.3 | 87.8 | 1170 |
| 120 | 0.51 | 15.5 | 0.31 | 16 | 0.41 | 4.2 | 5.4 | 90.0 | 1270 |
TYPE 633-ECC DIMENSIONS
| Conductor size mm2 | ECC size mm2 | ECC max. wire dia. mm | Nominal weight kg/km |
|---|---|---|---|
| 25 | 16 | 0.41 | 720 |
| 35 | 25 | 0.41 | 780 |
| 50 | 25 | 0.41 | 880 |
| 70 | 35 | 0.41 | 1040 |
| 95 | 50 | 0.41 | 1190 |
| 120 | 70 | 0.51 | 1310 |
ELECTRICAL CHARACTERISTICS
| Cond. size mm2 | DC res. 20 deg C oh/km | DC res. 90 deg C oh/km | React. oh/km | Min screen res. oh/km | Min ECC res. oh/km | Current 30 deg C A | Cond. S/C kA 1s | Screen S/C kA 1s | ECC S/C kA 1s |
|---|---|---|---|---|---|---|---|---|---|
| 25 | 0.795 | 1.05 | 0.155 | 1.6 | 0.7 | 105 | 3.1 | 1.6 | 3.6 |
| 35 | 0.565 | 0.749 | 0.144 | 1.2 | 0.5 | 130 | 4.3 | 2.1 | 5.0 |
| 50 | 0.393 | 0.521 | 0.136 | 0.8 | 0.5 | 160 | 6.1 | 3.1 | 5.0 |
| 70 | 0.277 | 0.368 | 0.131 | 0.7 | 0.4 | 195 | 8.5 | 3.5 | 7.5 |
| 95 | 0.210 | 0.279 | 0.125 | 0.6 | 0.3 | 230 | 11.6 | 4.1 | 9.0 |
| 120 | 0.164 | 0.218 | 0.119 | 0.6 | 0.23 | 260 | 14.6 | 4.1 | 11.5 |
Paramètre
| Tension nominale | 19/33 kV |
|---|---|
| Ambient rating basis | Current rating at 30 deg C ambient |
| Short circuit rating | Values shown are kA for 1 second |
4 technical tables were transcribed from the supplied datasheet. Confirm the final selection against the original PDF and project cable schedule.
Type 633 / 633-ECC standard and service limits
The following records the source-listed SANS references, rating, temperature range, bending statement and service basis for both the standard and ECC arrangements.
| Paramètre | Valeur indiquée dans la source |
|---|---|
| Normes | SANS 1520-2; SANS 1411-1; SANS 1411-3 |
| Tension nominale | 19/33 kV |
| Indice de température | −25 °C to +90 °C |
| rayon de courbure minimal | 9 × overall diameter |
| Couleur du fourreau | Noir |
| Performance | UV resistant, sunlight resistant and oil resistant |
| Ambient rating basis | Current rating at 30 °C ambient |
| Short-circuit rating | Values shown in the PDF are kA for 1 second |
An RFQ should name Type 633 or Type 633-ECC, conductor and ECC sizes, the required SANS documents and the intended reeling or section-feeder arrangement.
Options de câbles associées
Comparez ces options de câbles en fonction de la combinaison de services, du mouvement, de la charge, de la tension et des exigences de transmission.
Type 409 Class 2 Composite Screened Mining Cable 1.1–22 kV
Une option de câble similaire pour une application ou un profil de service différent.
Voir le produit
Type 440 Composite Screened Mining Cable 1.1–22 kV
Une option de câble similaire pour une application ou un profil de service différent.
Voir le produit
Type 450 Class 1 Composite Screened Mining Cable 3.3/3.3–33/33 kV
Une option de câble similaire pour une application ou un profil de service différent.
Voir le produitDemandez une recommandation et un devis pour un câble.
Veuillez nous indiquer les services requis, la longueur du câble, les contraintes mécaniques, l'environnement, le type de terminaison et la quantité. Notre équipe examinera votre demande avant de vous établir un devis.
- Veuillez inclure le nom du produit ou son SKU, ainsi que la longueur et la quantité de câble requises.
- Joignez une fiche technique, un dessin ou une fiche de spécifications si disponible.