UL 5334 & UL 5335 Mica-Glass Wire, 450°C 300/600V
UL 5334 and UL 5335 are UL-certified mica-glass wires for high-temperature internal equipment connections at 450°C. UL 5334 is the 300 V AC construction, while UL 5335 is the 600 V AC construction. Both use a stranded nickel-coated copper conductor, mica-glass insulation and a treated fiberglass braid.
- Voltan: UL 5334: 300 V AC; UL 5335: 600 V AC
- Suhu: 450°C
- Penebat / lapisan luar: mica-glass composite with fiberglass braid
- Pemilihan saiz: UL 5334: 24–14 AWG; UL 5335: 22–8 AWG in dimension tables
- Pensijilan: AWM diperakui UL; UL 758
UL 5334 / UL 5335 wire selection
UL 5334 and UL 5335 are UL-certified mica-glass wires for high-temperature internal equipment connections at 450°C. UL 5334 is the 300 V AC construction, while UL 5335 is the 600 V AC construction. Both use a stranded nickel-coated copper conductor, mica-glass insulation and a treated fiberglass braid.
Separate size tables keep the voltage choices clear. UL 5334 dimensions cover 24–14 AWG, and UL 5335 dimensions cover 22–8 AWG. Each row includes strand count, outside diameter, approximate weight and minimum bend radius. These values let a buyer compare the two constructions at a shared AWG without assuming that the thicker voltage construction will fit the same entry or terminal arrangement.
For ovens and similar hot equipment, consider both the hot-zone temperature and the mechanical protection along the wire route. The insulation system needs a supported installation, and the conductor size still depends on the complete circuit and thermal conditions. A 450°C rating alone is not a current-carrying-capacity calculation or a basis for replacing one voltage grade with another.
Lihat tab Spesifikasi untuk jadual model dan saiz. Terokai kategori Rangkaian kabel suhu tinggi untuk pembinaan yang berkaitan. Bandingkan MGT mica-glass wire for the existing 5107/5128 mica-tape product rather than treating the constructions as certified equivalents.
Binaan
UL 5334 / UL 5335 uses the following conductor and insulation system. The diagram illustrates the layer sequence; select the conductor construction and covering shown in the required size specification.
| Komponen | Butiran binaan |
|---|---|
| Pengalir | Stranded 27% nickel-coated copper |
| Penebat | Mica-glass composite |
| Lapisan luar | Fiberglass braid with high-temperature finish |
Aplikasi
UL 5334 and UL 5335 are used for internal wiring in ovens and similar high-temperature equipment where protected from mechanical abuse. Choose the 300 V or 600 V construction before checking the required conductor size.
UL 5334 / UL 5335 replacement selection
Untuk pertanyaan penggantian, berikan penandaan wayar sedia ada dan lukisan sambungan peralatan supaya pengalir, penebat dan susunan terminal dapat dipadankan.
Spesifikasi
| Parameter | Spesifikasi |
|---|---|
| Gaya UL | UL 5334 / UL 5335 |
| Kadaran voltan | UL 5334: 300 V AC; UL 5335: 600 V AC |
| Kadaran suhu | 450°C |
| Penebat / penutup | mica-glass composite with fiberglass braid |
| Julat saiz pengalir | UL 5334: 24–14 AWG; UL 5335: 22–8 AWG in dimension tables |
| UL 5334 rating | 450°C, 300 V AC |
| UL 5335 rating | 450°C, 600 V AC |
| Model dan saiz pengalir | Lembar | OD (mm) | OD (in) | Berat (kg/km) | Weight (lb/1000 ft) | Jejari lenturan minimum (in) |
|---|---|---|---|---|---|---|
| UL 5334 24 AWG | 7 | 1.73 | 0.068 | 6.37 | 4 | 0.54 |
| UL 5334 22 AWG | 7 | 2.06 | 0.081 | 8.83 | 6 | 0.65 |
| UL 5334 20 AWG | 10 | 2.24 | 0.088 | 11.19 | 8 | 0.70 |
| UL 5334 18 AWG | 16 | 2.44 | 0.096 | 14.51 | 10 | 0.77 |
| UL 5334 16 AWG | 26 | 2.79 | 0.110 | 20.43 | 14 | 0.88 |
| UL 5334 14 AWG | 41 | 3.20 | 0.126 | 29.33 | 20 | 1.01 |
| Model dan saiz pengalir | Lembar | OD (mm) | OD (in) | Berat (kg/km) | Weight (lb/1000 ft) | Jejari lenturan minimum (in) |
|---|---|---|---|---|---|---|
| UL 5335 22 AWG | 7 | 2.49 | 0.098 | 11.01 | 7 | 0.78 |
| UL 5335 20 AWG | 10 | 2.74 | 0.108 | 14.53 | 10 | 0.86 |
| UL 5335 18 AWG | 16 | 3.05 | 0.120 | 19.05 | 13 | 0.96 |
| UL 5335 16 AWG | 26 | 3.40 | 0.134 | 25.54 | 17 | 1.07 |
| UL 5335 14 AWG | 41 | 3.81 | 0.150 | 34.62 | 23 | 1.20 |
| UL 5335 12 AWG | 65 | 4.32 | 0.170 | 49.22 | 33 | 1.36 |
| UL 5335 10 AWG | 105 | 5.36 | 0.211 | 77.25 | 52 | 1.69 |
| UL 5335 8 AWG | 133 | 6.63 | 0.261 | 114.21 | 77 | 2.09 |
Pemilihan binaan yang ditetapkan
State UL 5334 or UL 5335 explicitly with AWG, conductor construction and required voltage. Use the corresponding table for OD, weight and bend radius.
Piawaian
TEBAOFLEX UL 5334 / UL 5335 wire is UL-certified appliance wiring material.
| Perkara | Keperluan atau rujukan |
|---|---|
| Pensijilan | AWM diperakui UL |
| Penetapan gaya | UL 5334 / UL 5335 |
| Piawaian binaan | UL 758 — Bahan Pendawaian Peralatan |
| Pengelasan nyalaan bagi gaya | Ujian nyalaan mendatar |
Nyatakan gaya UL, saiz pengalir serta penarafan voltan dan suhu dalam spesifikasi pembelian. Sertakan pengenalan produk dan dokumen pensijilan yang diperlukan bersama pertanyaan.
UL 5334 identifies the 300 V construction and UL 5335 identifies the 600 V construction. Keep the two styles separate on drawings and orders.
Minta cadangan kabel dan sebut harga
Hantar fungsi yang diperlukan, panjang kabel, keadaan tugas mekanikal, persekitaran, jenis penamatan dan kuantiti. Pasukan kami akan menilai aplikasi sebelum memberikan sebut harga.
- Sertakan nama produk atau SKU serta panjang kabel dan kuantiti yang diperlukan.
- Lampirkan spesifikasi, lukisan atau helaian data jika ada.