Получить ценовое предложение
КАБЕЛИ ДЛЯ ГОРНОДОБЫВАЮЩЕЙ ПРОМЫШЛЕННОСТИ И ПРОКЛАДКИ ТОННЕЛЕЙ ТЕБАОФЛЕКС

Type 633 / 633-ECC 19/33 kV Mining Cable

Type 633 / 633-ECC mining cable is a 19/33 kV screened medium-voltage cable for reeling, section feeders and open-cast mobile equipment.

  • 25–120 mm² power-conductor range in the Type 633 tables
  • Three individually screened flexible power cores
  • Three insulated EPM pilot cores in the standard construction
  • 633-ECC option replaces one pilot core with a tinned conductor
  • Triple-extruded EPR, nylon/tinned-copper braid and CR polychloroprene sheath
  • −25 °C to +90 °C; minimum bending radius listed as 9 × overall diameter

State the standard or ECC option, conductor area and cable-management duty when requesting a quotation.

Информация о продукте
Бренд
ТЕБАОФЛЕКС
Обзор продукта

Type 633 mining cable for 19/33 kV reeling and section feeders

Type 633 mining cable is a medium-voltage screened cable family rated 19/33 kV for electrically driven machines, movable and portable electric apparatus, section feeders and the open-cast mining equipment listed in the supplied SANS datasheet. It is a practical starting point for procurement teams comparing dragline, shovel, drill and other large mobile-equipment connections where a higher-voltage cable schedule and cable-management method must be reviewed together.

The standard Type 633 arrangement uses three individually screened flexible power cores laid up with three insulated pilot cores. Each power core uses Class 5 tinned annealed copper and triple-extruded EPR with a strippable semi-conducting screen. The source also defines a 633-ECC option: one pilot core is replaced with a tinned conductor. Nylon/tinned-copper braid, CR polychloroprene sheathing and open nylon reinforcement complete the listed construction.

Select Type 633 or 633-ECC according to the equipment earthing and monitoring design, then match conductor area, reeling route, termination, cable length and handling equipment. Specifications preserves the separate dimensional, ECC, electrical and service tables from the PDF. For adjacent voltage and construction comparisons, visit the Антикапиллярный провод | GXL и TXL | SAE J1128 category and use the related products below; the RFQ should state whether the ECC conductor is required.

Конструкция

Type 633 and 633-ECC screened MV construction

Type 633 uses individually screened medium-voltage power cores laid up with three insulated pilot cores. The ECC designation changes the monitoring/earth arrangement by replacing one pilot core with a tinned conductor; that choice should remain visible in the equipment and termination schedule.

Type 633 cable cross-section showing screened power cores, pilot cores, ECC path and outer reinforcement
Supplied Type 633 cross-section showing the individually screened MV cores and auxiliary/ECC arrangement.
Construction identified in the supplied datasheet
ПараметрЗначение по исходным данным
ДирижерГибкая многожильная луженая отожженная медь 5-го класса
ИзоляцияEPR thermosetting compound with strippable semi-conducting core screen, triple extruded
Power-core screenEach power core individually screened with tinned copper / textile braid
Пилотные ядраThree pilot cores insulated with EPM in the standard Type 633 construction
ECC optionOne pilot core replaced with a tinned conductor
УсилениеOpen nylon braid, minimum 16 strings
НожныCR polychloroprene rubber inner and black outer sheath

The cross-section distinguishes the power, pilot and ECC paths visually; use the original PDF tables and cable schedule to approve the selected core area, screen data, dimensions and mass.

Применения

Type 633 for high-voltage mobile mining connections

Type 633 is the higher-voltage option in this two-product set. Its source application combines portable and movable equipment with section-feeder duty, and names open-cast machines where reeling and cable handling are part of the installation brief.

  • Medium-sized draglines, shovels and drills in open-cast mining as listed by the source
  • Portable electric apparatus and section feeders requiring the 19/33 kV rating
  • Reeling purposes and other industrial applications covered by the supplied datasheet
  • Equipment interfaces where the standard three-pilot design or 633-ECC tinned-conductor option must be selected explicitly
  • Before ordering, confirm reel/guide layout, termination geometry, cable length, earth-fault scheme and the machine supply voltage

The PDF lists a 9 × overall-diameter minimum bending radius and tabled maximum tension values, but it does not state a reeling speed or dynamic service life. Treat those as project engineering inputs rather than generic Type 633 claims.

Спецификации

Type 633 / 633-ECC 19/33 kV Mining Cable technical data

The dimensional, electrical and service values below are transcribed from the supplied PDF for Type 633 mining cable. Tables remain separated by the construction or service section used in the source, so the applicable row can be matched to the equipment schedule without inventing a merged product range.

Use the source-listed conductor area, core dimensions, overall diameter, mass and electrical values together. Where the PDF gives a bending, tension, current or short-circuit value, it remains in the table; where it does not, no universal project rating is added.

TYPE 633 DIMENSIONS

TYPE 633 DIMENSIONS
Cond. size mm2Power wire dia. mmPower cond. dia. mmScreen wire dia. mmPilot size mm2Pilot wire dia. mmPilot cond. dia. mmMax tension kNOverall dia. mmМасса, кг/км
250.416.80.31160.414.21.171.3720
350.418.50.31160.414.21.673.5780
500.4110.30.31160.414.22.377.8890
700.5111.90.31160.414.23.283.01030
950.5113.50.31160.414.24.387.81170
1200.5115.50.31160.414.25.490.01270

TYPE 633-ECC DIMENSIONS

TYPE 633-ECC DIMENSIONS
Conductor size mm2ECC size mm2ECC max. wire dia. mmNominal weight kg/km
25160.41720
35250.41780
50250.41880
70350.411040
95500.411190
120700.511310

ELECTRICAL CHARACTERISTICS

ELECTRICAL CHARACTERISTICS
Cond. size mm2DC res. 20 deg C oh/kmDC res. 90 deg C oh/kmReact. oh/kmMin screen res. oh/kmMin ECC res. oh/kmCurrent 30 deg C ACond. S/C kA 1sScreen S/C kA 1sECC S/C kA 1s
250.7951.050.1551.60.71053.11.63.6
350.5650.7490.1441.20.51304.32.15.0
500.3930.5210.1360.80.51606.13.15.0
700.2770.3680.1310.70.41958.53.57.5
950.2100.2790.1250.60.323011.64.19.0
1200.1640.2180.1190.60.2326014.64.111.5

Параметр

Параметр
Номинальное напряжение19/33 kV
Ambient rating basisCurrent rating at 30 deg C ambient
Short circuit ratingValues shown are kA for 1 second

4 technical tables were transcribed from the supplied datasheet. Confirm the final selection against the original PDF and project cable schedule.

Стандарты

Type 633 / 633-ECC standard and service limits

The following records the source-listed SANS references, rating, temperature range, bending statement and service basis for both the standard and ECC arrangements.

Source-listed standard and service limits
ПараметрЗначение по исходным данным
СтандартыSANS 1520-2; SANS 1411-1; SANS 1411-3
Номинальное напряжение19/33 kV
Температурный диапазон−25 °C to +90 °C
Минимальный радиус изгиба9 × overall diameter
цвет носковЧерный
PerformanceUV resistant, sunlight resistant and oil resistant
Ambient rating basisCurrent rating at 30 °C ambient
Short-circuit ratingValues shown in the PDF are kA for 1 second

An RFQ should name Type 633 or Type 633-ECC, conductor and ECC sizes, the required SANS documents and the intended reeling or section-feeder arrangement.

Сравнение по пошлинам

Варианты кабелей по теме

Сравните эти варианты кабелей по сочетанию услуг, типу перемещения, нагрузке, напряжению и требованиям к передаче.

Коммерческое предложение, составленное инженерами

Запросите рекомендации по выбору кабеля и коммерческое предложение.

Укажите необходимые услуги, длину кабеля, механические характеристики, условия эксплуатации, тип разъемов и количество. Наша команда рассмотрит заявку перед составлением коммерческого предложения.

  • Укажите название продукта или артикул, а также необходимую длину кабеля и количество.
  • При наличии приложите техническое задание, чертеж или спецификацию.

    Необязательно: прикрепите спецификацию кабеля, чертёж, паспорт или изображение изделия (PDF, DOC, DOCX, XLS, XLSX, CSV, JPG или PNG; максимум 10 МБ).

    Эти ссылки и сведения об испытаниях взяты из предоставленного комплекта документации. Формулировки сохранены в соответствии с источником: ссылка на стандарт или метод испытаний не представляется сертификатом изделия, если источник прямо так её не называет. Ссылка / позиция Предоставленная формулировка

    SAE J1128