UL 5359 Mica-Glass Wire, 600V 200/450°C

UL 5359 wire selection

UL 5359 is a UL-certified mica-insulated wire rated 600 V AC, with 200°C and 450°C construction options. This page includes a detailed 450°C single-conductor selection table for high-temperature equipment leads protected from mechanical damage.

The 18 dimensioned configurations cover 26 AWG through 4/0 AWG. Each row combines UL 5359 with the conductor size and lists stranding, mica thickness, fiberglass-braid thickness and finished diameter. The wall schedule increases in steps as the conductor becomes larger, so the table supports both electrical size selection and the practical fit of sleeves, clamps and equipment entries.

For heater, oven or process-equipment wiring, choose the required temperature grade before comparing diameters. The 200°C and 450°C constructions are separate selections under the same style number. Installation should avoid repeated flexing and protect the mica-and-braid system from mechanical abuse. The operating current must be assessed for the selected conductor, ambient conditions, grouping and complete equipment application.

Model ve boyut tabloları için Teknik Özellikler sekmesine bakın. Şu ürün grubuna göz atın: yüksek sıcaklık kablosu ürün aralığını İlgili yapılar için. Karşılaştırın. MGT mica-glass wire for the existing 5107/5128 lead wire construction.

Yapı

UL 5359 uses the following conductor and insulation system. The diagram illustrates the layer sequence; select the conductor construction and covering shown in the required size specification.

Uygulamalar

UL 5359 is used for protected internal leads in high-temperature equipment, including heaters and ovens. Keep the mica-insulated lead supported and avoid locations with repeated bending or rubbing.

UL 5359 replacement selection

Yedek kablo talebinde mevcut kablonun işaretlemesini ve ekipman bağlantı çizimini gönderin; böylece iletken, yalıtım ve terminal düzeni karşılaştırılabilir.

Teknik özellikler

450°C single-conductor dimensional reference. Nominal construction dimensions are for selection; the quotation drawing defines the supplied configuration.

Style construction thicknesses are shown in mils; 1 mil = 0.0254 mm. Nominal finished dimensions are listed separately.

Belirtilen yapının seçimi

Specify UL 5359, AWG, 600 V AC and the required 200°C or 450°C construction. The dimension table below applies to the 450°C mica/fiberglass version.

Standartlar

TEBAOFLEX UL 5359 wire is UL-certified appliance wiring material.

Satın alma şartnamesinde UL stilini, iletken boyutunu, gerilim ve sıcaklık sınıfını belirtin. Talebe gerekli ürün tanımını ve sertifika belgelerini ekleyin.