UL 5359 Mica-Glass Wire, 600V 200/450°C
UL 5359 is a UL-certified mica-insulated wire rated 600 V AC, with 200°C and 450°C construction options. This page includes a detailed 450°C single-conductor selection table for high-temperature equipment leads protected from mechanical damage.
- Voltan: 600 V AC
- Suhu: 200°C or 450°C by construction
- Penebat / lapisan luar: mica tape and treated fiberglass braid
- Pemilihan saiz: 30 AWG–4/0 AWG style range; table: 26 AWG–4/0 AWG
- Pensijilan: AWM diperakui UL; UL 758
UL 5359 wire selection
UL 5359 is a UL-certified mica-insulated wire rated 600 V AC, with 200°C and 450°C construction options. This page includes a detailed 450°C single-conductor selection table for high-temperature equipment leads protected from mechanical damage.
The 18 dimensioned configurations cover 26 AWG through 4/0 AWG. Each row combines UL 5359 with the conductor size and lists stranding, mica thickness, fiberglass-braid thickness and finished diameter. The wall schedule increases in steps as the conductor becomes larger, so the table supports both electrical size selection and the practical fit of sleeves, clamps and equipment entries.
For heater, oven or process-equipment wiring, choose the required temperature grade before comparing diameters. The 200°C and 450°C constructions are separate selections under the same style number. Installation should avoid repeated flexing and protect the mica-and-braid system from mechanical abuse. The operating current must be assessed for the selected conductor, ambient conditions, grouping and complete equipment application.
Lihat tab Spesifikasi untuk jadual model dan saiz. Terokai kategori Rangkaian kabel suhu tinggi untuk pembinaan yang berkaitan. Bandingkan MGT mica-glass wire for the existing 5107/5128 lead wire construction.
Binaan
UL 5359 uses the following conductor and insulation system. The diagram illustrates the layer sequence; select the conductor construction and covering shown in the required size specification.
| Komponen | Butiran binaan |
|---|---|
| Pengalir | Stranded nickel-coated copper or nickel, selected for the required construction |
| Penebat | Pita mika |
| Lapisan luar | Treated fiberglass braid |
Aplikasi
UL 5359 is used for protected internal leads in high-temperature equipment, including heaters and ovens. Keep the mica-insulated lead supported and avoid locations with repeated bending or rubbing.
UL 5359 replacement selection
Untuk pertanyaan penggantian, berikan penandaan wayar sedia ada dan lukisan sambungan peralatan supaya pengalir, penebat dan susunan terminal dapat dipadankan.
Spesifikasi
| Parameter | Spesifikasi |
|---|---|
| Gaya UL | UL 5359 |
| Kadaran voltan | 600 V AC |
| Kadaran suhu | 200°C or 450°C by construction |
| Penebat / penutup | mica tape and treated fiberglass braid |
| Julat saiz pengalir | 30 AWG–4/0 AWG style range; table: 26 AWG–4/0 AWG |
| Temperature choices | 200°C or 450°C, according to construction |
| Kadaran voltan | 600 V AC |
| Pemasangan | Protected internal wiring without repeated flexing |
450°C single-conductor dimensional reference. Nominal construction dimensions are for selection; the quotation drawing defines the supplied configuration.
| Model dan saiz pengalir | Bilangan lembar konduktor (bil./mm) | Mica wall (mm) | Braid wall (mm) | OD nominal / toleransi (mm) |
|---|---|---|---|---|
| UL 5359 26 AWG | 7/0.16 | 0.41 | 0.18 | 1.8±0.1 |
| UL 5359 24 AWG | 7/0.2 | 0.41 | 0.18 | 1.9±0.1 |
| UL 5359 22 AWG | 7/0.254 | 0.41 | 0.18 | 2.1±0.2 |
| UL 5359 20 AWG | 10/0.254 | 0.41 | 0.18 | 2.2±0.2 |
| UL 5359 18 AWG | 16/0.254 | 0.41 | 0.18 | 2.5±0.2 |
| UL 5359 16 AWG | 26/0.254 | 0.41 | 0.18 | 2.8±0.2 |
| UL 5359 14 AWG | 41/0.254 | 0.41 | 0.18 | 3.2±0.3 |
| UL 5359 12 AWG | 65/0.254 | 0.41 | 0.18 | 3.6±0.3 |
| UL 5359 10 AWG | 103/0.254 | 0.51 | 0.38 | 5.1±0.5 |
| UL 5359 8 AWG | 163/0.254 | 0.51 | 0.38 | 6.0±0.5 |
| UL 5359 6 AWG | 260/0.254 | 0.51 | 0.38 | 7.1±0.5 |
| UL 5359 4 AWG | 413/0.254 | 0.51 | 0.38 | 8.2±0.5 |
| UL 5359 2 AWG | 168/0.5 | 0.64 | 0.51 | 10.5±0.8 |
| UL 5359 1 AWG | 212/0.5 | 0.64 | 0.51 | 11.5±0.8 |
| UL 5359 1/0 AWG | 268/0.5 | 0.64 | 0.51 | 12.7±0.8 |
| UL 5359 2/0 AWG | 342/0.5 | 0.64 | 0.51 | 14.0±0.8 |
| UL 5359 3/0 AWG | 430/0.5 | 0.64 | 0.51 | 15.4±0.8 |
| UL 5359 4/0 AWG | 538/0.5 | 0.64 | 0.51 | 17.0±0.8 |
Style construction thicknesses are shown in mils; 1 mil = 0.0254 mm. Nominal finished dimensions are listed separately.
| Model and conductor group | Minimum average mica wall (mils) | Minimum average treated braid (mils) |
|---|---|---|
| UL 5359 30–12 AWG | 16 | 7 |
| UL 5359 11–4 AWG | 20 | 15 |
| UL 5359 3–4/0 AWG | 25 | 20 |
Pemilihan binaan yang ditetapkan
Specify UL 5359, AWG, 600 V AC and the required 200°C or 450°C construction. The dimension table below applies to the 450°C mica/fiberglass version.
Piawaian
TEBAOFLEX UL 5359 wire is UL-certified appliance wiring material.
| Perkara | Keperluan atau rujukan |
|---|---|
| Pensijilan | AWM diperakui UL |
| Penetapan gaya | UL 5359 |
| Piawaian binaan | UL 758 — Bahan Pendawaian Peralatan |
| Pengelasan nyalaan bagi gaya | Ujian nyalaan mendatar |
Nyatakan gaya UL, saiz pengalir serta penarafan voltan dan suhu dalam spesifikasi pembelian. Sertakan pengenalan produk dan dokumen pensijilan yang diperlukan bersama pertanyaan.
Minta cadangan kabel dan sebut harga
Hantar fungsi yang diperlukan, panjang kabel, keadaan tugas mekanikal, persekitaran, jenis penamatan dan kuantiti. Pasukan kami akan menilai aplikasi sebelum memberikan sebut harga.
- Sertakan nama produk atau SKU serta panjang kabel dan kuantiti yang diperlukan.
- Lampirkan spesifikasi, lukisan atau helaian data jika ada.