Braidless Silicone Rubber Cable 5kV 200°C Single Core

Braidless Silicone Rubber Cable 5kV 200°C Single Core is a TEBAOFLEX cable for the application and operating conditions identified in the original product record. When selecting braidless silicone rubber cable, confirm the system voltage, conductor size, maximum conductor temperature, routing temperature, termination method, available bending space and whether the cable will be exposed to oil, chemicals, UV or abrasion. The supplied data identifies indoor high-temperature environments as the preferred use case. If the cable route includes dragging, repeated flexing, outdoor exposure or mechanical impact, confirm whether additional protection, a different sheath system or a braided / armoured construction is required. For quotation, provide the required AWG size or cross section, cable length, operating temperature, installation drawing, termination type, test document requirements and any project standard notes. For long runs, voltage drop and conductor resistance should be checked before final size selection. Braidless silicone rubber cable is a 5kV single-core high-temperature cable with a flexible Class H tinned copper conductor and SIR silicone rubber insulation for indoor industrial heat zones. The source record places this product in high temperature cables. Before ordering, confirm the exact product variant, conductor or core arrangement, system rating, route conditions, equipment connection and required documentation against the project specification.

Braidless Silicone Rubber Cable 5kV 200°C Single Core construction

Cable Construction

1. Tinned Copper Conductor: Class H flexible tinned copper wires for the single-core current path.
2. SIR Silicone Rubber Insulation: Silicone rubber insulation, 4.06mm nominal thickness, providing the thermal and electrical insulation layer.

Braidless Silicone Rubber Cable 5kV 200°C Single Core applications

Applications

• Steel mills, foundries and glass manufacturing areas with extreme heat exposure.
• Power generation equipment, including turbine and boiler areas.
• Industrial ovens, kilns and heating appliance wiring.
• Cranes and material handling systems operating near high-temperature equipment.
• Indoor 5kV circuits where silicone rubber insulation and flexible tinned copper conductors are required.

Selection Notes for Buyers

When selecting braidless silicone rubber cable, confirm the system voltage, conductor size, maximum conductor temperature, routing temperature, termination method, available bending space and whether the cable will be exposed to oil, chemicals, UV or abrasion. The supplied data identifies indoor high-temperature environments as the preferred use case. If the cable route includes dragging, repeated flexing, outdoor exposure or mechanical impact, confirm whether additional protection, a different sheath system or a braided / armoured construction is required.

For quotation, provide the required AWG size or cross section, cable length, operating temperature, installation drawing, termination type, test document requirements and any project standard notes. For long runs, voltage drop and conductor resistance should be checked before final size selection.

Selection checks

Confirm the equipment interface, installation method, route length, movement or flexing duty, environmental exposure, conductor or core requirements and project documentation before final selection.

Braidless Silicone Rubber Cable 5kV 200°C Single Core specifications

The source-listed technical notes are retained below. Confirm the final size, tolerance, installation basis and ordered configuration before release.

Braidless Silicone Rubber Cable for 5kV High-Temperature Power Wiring

Braidless silicone rubber cable is a single-core 5000V cable designed for high-temperature industrial wiring where ordinary PVC or general rubber cable insulation cannot provide enough thermal stability. The construction uses a flexible Class H tinned copper conductor and SIR silicone rubber insulation, giving the cable a continuous conductor temperature rating of 200°C with short-time overload and short-circuit temperature margins for demanding heat zones.

This cable is intended for indoor high-temperature environments such as steel mills, foundries, glass manufacturing, turbine and boiler areas, industrial ovens, kilns, heating appliance wiring and cranes or material handling systems exposed to elevated ambient heat. The braidless construction helps reduce weight and simplifies stripping, but it should not be treated as a mechanically armoured or abrasion-protected cable.

Source-listed technical tables

The tables below retain the original product data, including units, ranges and ordering examples.

Original product attributes

These product attributes are retained as supplied and should be checked against the ordered construction.

Braidless Silicone Rubber Cable 5kV 200°C Single Core standards and compliance

The following standard references are carried over from the original product record. They identify the source basis and do not replace project-specific certification or inspection requirements.

• ANSI/NEMA WC 71 Listed in the supplied file for silicone rubber insulated cable with 5kV shielded and unshielded construction reference.
• ICEA S-96-659 Listed in the supplied file for 5kV SIR insulated cable reference.
• ASTM B33 Reference for tinned soft or annealed copper wire.
• ASTM B172 Reference for conductors of insulated cables, with Class H comparison noted in the supplied data.

Where a project requires a test report, certificate, marking record or inspection release, include that requirement in the quotation request.