CDUR01 Underwater Video/Data Umbilical Cable
CDUR01 Underwater Video/Data Umbilical Cable is a TEBAOFLEX cable for the application and operating conditions identified in the original product record. No third-party approval standard is stated in the supplied image. Project-specific underwater, diving, CCTV or tow-cable compliance requirements should be confirmed before ordering. Start by confirming the electrical functions. The cable includes several conductor sizes and twisted shielded pairs, so the pinout, signal type, voltage drop and current per conductor must be mapped before choosing a termination. Send the exact size, length, installation duty and documentation requirements for a technical quotation.
CDUR01 Underwater Video/Data Umbilical Cable is a TEBAOFLEX cable for the application and operating conditions identified in the original product record. No third-party approval standard is stated in the supplied image. Project-specific underwater, diving, CCTV or tow-cable compliance requirements should be confirmed before ordering. Start by confirming the electrical functions. The cable includes several conductor sizes and twisted shielded pairs, so the pinout, signal type, voltage drop and current per conductor must be mapped before choosing a termination. For long runs up to 1000 m, check conductor resistance and voltage drop carefully. Mechanical selection should include breaking strength, maximum working load, water weight, sheave diameter, winch or reel geometry, dynamic bending radius and expected pulling profile. The maximum working load is 375 kg, while the breaking strength is 1500 kg; these two values should not be confused during safety-factor calculations. For commercial diving and CCTV systems, specify whether the cable will be used in fresh water or sea water, expected depth, deployment method, connector type, strain relief, potting method, termination drawing and required test documentation. CDUR01 umbilical cable is a compact underwater video/data and power cable for commercial diving, CCTV systems and tow-cable applications. It combines mixed power conductors, twisted shielded pairs, Vectran fibre braid reinforcement and an orange PUR outer jacket. The source record places this product in marine & offshore cables. Before ordering, confirm the exact product variant, conductor or core arrangement, system rating, route conditions, equipment connection and required documentation against the project specification.
CDUR01 Underwater Video/Data Umbilical Cable construction
Cable Construction
- Power conductor group: 2 × 0.8 mm² conductors, equivalent to approximately 2 × 18 AWG.
- Auxiliary power conductor group: 4 × 0.34 mm² conductors, equivalent to approximately 4 × 22 AWG.
- Signal / data pairs: 3 × 2 × 0.2 mm² twisted shielded pairs, equivalent to approximately 3 × 2 × 24 AWG.
- Strength member: Vectran fibre braid reinforcement for tensile strength.
- Outer jacket: Orange PUR outer jacket with 1.5 mm nominal thickness.
CDUR01 Underwater Video/Data Umbilical Cable applications
Applications
- Commercial diving support cables
- Underwater CCTV inspection systems
- Tow cable applications requiring power and data paths
- Underwater equipment links with custom terminations
- Deck-to-submerged-device cables where water weight and bend radius must be controlled
Selection Notes for Buyers
Start by confirming the electrical functions. The cable includes several conductor sizes and twisted shielded pairs, so the pinout, signal type, voltage drop and current per conductor must be mapped before choosing a termination.
For long runs up to 1000 m, check conductor resistance and voltage drop carefully. A 250 V working voltage does not automatically is specified to support that connected equipment will receive the required voltage at maximum length.
Mechanical selection should include breaking strength, maximum working load, water weight, sheave diameter, winch or reel geometry, dynamic bending radius and expected pulling profile. The maximum working load is 375 kg, while the breaking strength is 1500 kg; these two values should not be confused during safety-factor calculations.
For commercial diving and CCTV systems, specify whether the cable will be used in fresh water or sea water, expected depth, deployment method, connector type, strain relief, potting method, termination drawing and required test documentation.
Selection checks
Confirm the equipment interface, installation method, route length, movement or flexing duty, environmental exposure, conductor or core requirements and project documentation before final selection.
CDUR01 Underwater Video/Data Umbilical Cable specifications
Source-listed technical tables
The tables below retain the original product data, including units, ranges and ordering examples.
| Product Type | Underwater video/data and power umbilical cable |
| Model | CDUR01 / CDUR-01 |
| Description | Umbilical cable |
| Composition | 2 × 0.8 mm² power conductors; 4 × 0.34 mm² power conductors; 3 × 2 × 0.2 mm² twisted shielded pairs |
| Strength Member | Vectran fibre braid |
| Outer Jacket | Orange PUR, 1.5 mm nominal thickness |
| Outside Diameter | 12.2 mm |
| Working Voltage | 250 V |
| Weight in Air | 155 kg/km |
| Weight in Fresh Water | 38 kg/km |
| Weight in Sea Water | 35 kg/km |
| Breaking Strength | 1500 kg |
| Maximum Working Load | 375 kg |
| Minimum Static Bending Radius | 61 mm |
| Minimum Dynamic Bending Radius | 122 mm |
| Operating Temperature | -40°C to +90°C |
| Length | Up to 1000 m |
| Published Product Code | CDUR-01 |
| Working Voltage | 250 V |
| CAT 6 / Coax Parameters | Not specified in the supplied data |
| Custom Termination | Available according to supplied data |
| Parameter | Value |
|---|---|
| Resistance, 24 AWG conductors | < 88.67 Ω/km @ 20°C |
| Resistance, 22 AWG conductors | < 56.75 Ω/km @ 20°C |
| Resistance, 18 AWG conductors | < 19.50 Ω/km @ 20°C |
| Outside diameter | 12.2 mm |
| Working voltage | 250 V |
| Weight in air | 155 kg/km |
| Weight in fresh water | 38 kg/km |
| Weight in sea water | 35 kg/km |
| Breaking strength | 1500 kg |
| Maximum working load | 375 kg |
| Minimum static bending radius | 61 mm |
| Minimum dynamic bending radius | 122 mm |
| Operating temperature | -40°C to +90°C |
| Maximum length | 1000 m |
Original product attributes
These product attributes are retained as supplied and should be checked against the ordered construction.
| Product Type | Underwater umbilical cable |
|---|---|
| Model | CDUR01 / CDUR-01 |
| Working Voltage | 250 V |
| Power Conductors | 2 × 0.8 mm² and 4 × 0.34 mm² |
| Signal Pairs | 3 × 2 × 0.2 mm² twisted shielded pairs |
| Strength Member | Vectran fibre braid |
| Outer Jacket | Orange PUR, 1.5 mm |
| Outside Diameter | 12.2 mm |
| Weight in Air | 155 kg/km |
| Weight in Fresh Water | 38 kg/km |
| Weight in Sea Water | 35 kg/km |
| Breaking Strength | 1500 kg |
| Maximum Working Load | 375 kg |
| Static Bending Radius | 61 mm minimum |
| Dynamic Bending Radius | 122 mm minimum |
| Operating Temperature | -40°C to +90°C |
| Maximum Length | Up to 1000 m |
| Termination | Custom termination available |
| Application | Commercial diving, underwater CCTV and tow cable systems |
CDUR01 Underwater Video/Data Umbilical Cable standards and compliance
A targeted public-reference check found the following terminology or standard context. It is provided for procurement cross-checking only and is not a TEBAOFLEX certification claim:
- IEC 60092-350:2020 states that sub-sea and umbilical cables and data/communication cables are outside its scope; it should not be assigned to this hybrid cable without a project-specific applicability review.
The source product record states that no third-party approval standard is named. Confirm underwater, diving, CCTV or tow-cable requirements for the ordered application.
Where a project requires a test report, certificate, marking record or inspection release, include that requirement in the quotation request.
Request a cable recommendation and quotation
Send the required services, cable length, mechanical duty, environment, termination and quantity. Our team will review the application before quoting.
- Include the product name or SKU plus the required cable length and quantity.
- Attach a specification, drawing or data sheet when available.