KYFLCY EMC Flat Festoon Cable

KYFLCY EMC flat festoon cable

KYFLCY is a flexible EMC flat cable for power and control circuits in festoon systems, hoists, transport equipment, machine tools, cranes and container cranes. Its flat parallel construction is intended for strong operational bending in one plane under medium mechanical stresses.

The supplied construction uses flexible stranded electrolytic copper, PVC core insulation, identified cores, an EMC screen with metallic braid and a flexible black PVC outer sheath. The screen is relevant where electromagnetic interference could affect the connected control or power system. The cable is listed for dry, humid and wet rooms, with an oil-resistant and flame-retardant PVC sheath reference.

• Voltage: 300/500 V for sizes up to 1 mm²; 450/750 V for sizes from 1.5 mm².
• Temperature: mobile −25 to +70 °C; fixed −40 to +70 °C.
• Bend reference: approximately 10 × cable diameter.
• Selection: confirm core layout, flat dimensions, screen termination, travel and support geometry.

The Specifications tab keeps the supplied KYFLCY arrangements together. Request a detailed quote with the circuit schedule, conductor area, route, speed, bend path and EMC bonding requirements.

KYFLCY construction

KYFLCY is a flat EMC festoon cable with flexible class 5 copper conductors, PVC insulation, copper screening and a flexible black PVC outer sheath. Its parallel flat arrangement is intended to bend in the designed plane; the final geometry must follow the selected construction and approved drawing.

Applications

KYFLCY is supplied as a power and control cable for festoon systems, hoists, transport equipment, machine tools, cranes and container cranes. The source describes medium mechanical stresses, strong operational bends in one plane and dry, humid or wet rooms.

Selection checks

• Confirm the required power, control, earth, pilot or paired-core functions against the machine wiring schedule.
• Check the flat or round travel path, bend plane, support/trolley arrangement, speed, acceleration and free length.
• Confirm screen termination and EMC bonding where the selected construction includes copper screening.
• State the requested length, marking, drum or packing method, terminations and test documentation in the enquiry.

The final cable selection must follow the approved route geometry and product drawing.

KYFLCY specifications

The following rows are transcribed from the supplied KYFLCY datasheet. A dash or request note is retained where the source does not provide a value; no size-only product pages are created.

Operating reference: conductor +70 °C; short-circuit +150 °C; mobile −25 to +70 °C; fixed −40 to +70 °C; approximate bend reference 10 × cable diameter; RoHS stated.

KYFLCY standards and service limits

The source data and product-family references identify the following electrical, material and environmental values. The voltage depends on conductor area, so the selected size controls the final rating.

Include the required standard edition, test scope, route geometry and documentation requirements in the purchase enquiry.