KYFLTFCY 300/500 V EMC Flat Festoon Cable with Suspension Element

KYFLTFCY EMC flat festoon cable with suspension element

KYFLTFCY is a 300/500 V EMC flat festoon cable with an integrated suspension element for power and control circuits on hoists, cranes, transport equipment and machine tools. Its flat construction is intended for strong operational bends in one plane under medium mechanical stresses.

The supplied product data identifies flexible class 5 copper conductors, special core colours with numbering and one green/yellow conductor, copper shielding and a black PVC outer sheath. The suspension element is a defining selection feature: it supports the cable arrangement over the intended travel path, but the support spacing, free length, trolley geometry and allowable mechanical load still require project confirmation.

• Nominal voltage: 300/500 V.
• Published family reference: 28 × 1, with copper weight 462 kg/km and total weight on request.
• Temperature: mobile −25 to +70 °C; fixed −40 to +70 °C.
• EMC: bare copper braiding is listed to reduce undue electromagnetic influence.

Use the Specifications tab for the listed 28×1 construction. Before ordering, send the route length, suspension/support geometry, movement, bend radius, screen termination, circuit schedule and required test documents.

KYFLTFCY construction

KYFLTFCY is a flat EMC PVC cable with an integrated suspension element. The supplied construction lists flexible class 5 copper conductors, numbered and special-colour cores with one green/yellow conductor, copper shielding and a black PVC flat sheath. The large suspension element shown in the cross-section is part of the cable construction and must be coordinated with the support spacing and travel geometry.

Applications

KYFLTFCY is supplied as a power and control cable for hoists, transport equipment, machine tools, cranes and container cranes. The source describes medium mechanical stresses, strong operational bends in one plane and dry, damp or wet rooms.

Selection checks

• Confirm the required power, control, earth, pilot or paired-core functions against the machine wiring schedule.
• Check the flat or round travel path, bend plane, support/trolley arrangement, speed, acceleration and free length.
• Confirm screen termination and EMC bonding where the selected construction includes copper screening.
• State the requested length, marking, drum or packing method, terminations and test documentation in the enquiry.

The final cable selection must follow the approved route geometry and product drawing.

KYFLTFCY specifications

The following rows are transcribed from the supplied KYFLTFCY datasheet. A dash or request note is retained where the source does not provide a value; no size-only product pages are created.

Operating reference: 300/500 V; mobile −25 to +70 °C; fixed −40 to +70 °C; matching public family catalogue lists a 2000 V test reference and approximately 10 × cable-diameter bend radius. Confirm these two fields for the final production drawing.

KYFLTFCY standards and service limits

Google public catalogue results for the matching KYFLTFCY family add the missing mobile upper temperature, fixed upper temperature, test-voltage and bend-radius references. These fields are used here only where the public product catalogue provides the matching family entry; the supplied KYFLTFCY PDF remains the controlling source for the page’s product identity and 28×1 row.

Include the required standard edition, test scope, route geometry and documentation requirements in the purchase enquiry.