UL 3580 Silicone Motor Lead Wire, 150°C 1000V

UL 3580 wire selection

UL 3580 is a UL-certified silicone motor lead wire rated 150°C and 1000 V AC. It is intended for motor leads and internal appliance or electronic equipment wiring where the lead is protected from mechanical abuse.

The detailed size table covers 26–6 AWG. Nominal silicone thickness is 1.20 mm in the 26–10 AWG rows and 1.58 mm in the 8–6 AWG rows. Conductor stranding and finished diameter are listed with each model-size combination to help check motor terminal entries, connection boxes and protective sleeves. A separate insulation schedule explains the larger conductor groups within the style range.

For a motor connection, allow space for the finished wire rather than selecting the entry around the bare conductor size. The listed construction uses a bend radius of 10 times its finished diameter. Check the temperature near the winding exit and at the connection hardware, because the 150°C wire rating must be compatible with the rest of the assembly.

Consulte o separador Especificações para ver as tabelas de modelos e tamanhos. Explore a gama de cabos de alta temperatura for related constructions. Compare UL 3644 for a different 1 kV wall schedule and the família de fios de ligação de silicone for lower-voltage options.

Construção

O UL 1056 utiliza o sistema de condutor e isolamento indicado a seguir. O esquema mostra a sequência das camadas; selecione a construção do condutor e o revestimento previstos na especificação do tamanho necessário.

Aplicações

UL 3580 is used as motor lead wire and for internal appliance or electronic equipment wiring. Route and support the lead to prevent rubbing or mechanical damage at the winding exit and terminal enclosure.

UL 3580 replacement selection

Para pedir um fio de substituição, envie a marcação do fio existente e o esquema de ligação do equipamento. Assim, podem comparar-se o condutor, o isolamento e a disposição dos terminais.

Especificações

Nominal dimensions follow the listed conductor constructions. Confirm the agreed finished-diameter drawing for tight-clearance assemblies.

Style construction thicknesses are shown in mils; 1 mil = 0.0254 mm. Nominal finished dimensions are listed separately.

Seleção da construção especificada

Specify UL 3580 with AWG or kcmil, stranding, required OD and connection temperature. For a size outside the dimension table, use the insulation schedule as a starting point and request the corresponding drawing.

Normas

TEBAOFLEX UL 3580 wire is UL-certified appliance wiring material.

Indique o estilo UL, o tamanho do condutor e as classificações de tensão e temperatura na especificação de compra. Junte ao pedido a identificação do produto e os documentos de certificação exigidos.