SYSLTOE FO Basket Spreader Cable 0.6/1 kV

SYSLTOE FO basket spreader cable is a 0.6/1 kV flexible cable for vertical container-crane basket operation. Fine-stranded copper, thermoplastic insulation, an aramid self-support element and a black PUR sheath are arranged for suspended movement where the cable must enter and collect in the basket without transferring the suspended load into the cores. The supplied product data states a 45 x cable-OD moving bend radius, movement up to 160 m/min and suspension up to 50 m.

Basket direction and geometry are part of the cable specification: install in the specified counter-clockwise direction, keep the route free of unintended torsion and confirm the basket diameter, guide clearance and anchor method. This page is kept separate from the 300/500V YSLTOE-J collector-basket control cable because the voltage, support construction and ordering intent differ. Send the approved model marking, core schedule, length, basket dimensions, speed, suspension height and environmental requirements for RFQ review.

Use the stated values as selection references, not as a substitute for the approved part table. The offered configuration must be checked for conductor stress, basket geometry, suspension length, core identification and the required routine-test documents.

Construction

• Fine-stranded bare copper conductors.
• Thermoplastic insulation with PE and green-yellow or numbered core identification as listed in the product data.
• Aramid self-support element for suspended basket duty.
• Black PUR outer sheath.

The support element carries the suspended arrangement while the cores remain flexible. Confirm the approved FO/model designation and final core layout before production.

Applications

• Vertical basket spreader systems on container cranes.
• Suspended basket routes up to 50 m as stated in the supplied data.
• Moving service with a stated maximum speed of 160 m/min.

Confirm counter-clockwise installation, basket diameter, anchor method, guide clearance and bend geometry. For a 300/500V collector-basket control cable, see YSLTOE-J cable.

Specifications

Part number, core arrangement, dimensions and copper/net weights must be confirmed from the approved configuration table.

Standards

• 3.5 kV test reference as stated in the supplied product data.
• Oil-test reference to the IEC 60811-404 family as stated in the supplied data.
• UV, ozone and moisture properties are stated product references; request the order-specific test documentation in the RFQ.