


TF-HULL Ship Hull Biofouling Cleaning & Grooming Robot Buoyant Hybrid Tether Cable (8GAX50, 12GAX49, 24XM308 & 13XM469 Series)
TF-HULL (TF-HULL-TETHER) is a neutrally or slightly positively buoyant electro-optical hybrid tether cable for in-water ship hull biofouling cleaning, proactive hull grooming and cavitation jetting robots from 3 kW to 75 kW. Rated 400–1,000 V DC and 0.6/1 kV AC with Class 5/6 copper or lightweight aluminum-alloy cores, stainless-steel tube fibers or subsea Cat 6, aramid/LCP tensile braid and barnacle-cut-resistant Shore 94A PUR or low-drag UV-LDPE jackets.
TF-HULL ship hull biofouling cleaning robot tether cables transmit 3 kW to 75 kW (400–1,000 V DC or 0.6/1 kV AC) thruster/brush/cavitation-pump power, gigabit optical or subsea Cat 6 video telemetry, and optional polyamide fluid-sampling lines across Ø 11.3 mm to Ø 39.25 mm buoyant cross-sections with 5 kN to 70 kN minimum breaking load.
In-water hull cleaning (IWHC) and proactive hull-grooming vehicles operate in the harshest shallow subsea zone: murky 0.5–30 m port anchorages with 1–3 knot tidal currents, sharp calcareous barnacle and tubeworm encrustation along bilge keels and sea chests, oily harbor slicks, and exposed ship propellers. Standard sinking ROV umbilicals drag into seabed silt or snag rudder horns, whereas soft TPR jackets slice open on barnacle edges and wick seawater longitudinally into vehicle junction boxes. TF-HULL combines closed-cell syntactic buoyancy layers, dry swelling water-blocking tapes/compounds, high-modulus aramid or liquid-crystal-polymer (LCP) contra-helical braids, and cut-resistant Shore 94A matte PUR (including high-visibility Neon Yellow or Fluorescent Orange for turbid harbor water) or low-drag UV-LDPE outer sheaths.
Select from six TF-HULL power-and-telemetry tiers (TF-HULL-3K through TF-HULL-75K) or specify direct dimensional equivalents to European marine tether references 8GAX50, 12GAX49, 13XM469, 24XM308, 3GAX47, 12GAX64, 12XM463 and 12XM388. Supplied as continuous bulk cable on wooden reels with heat-shrink end caps from 50 m MOQ in 7 to 45 working days.
Explore the marine, offshore and shipboard cable range for related configurations.
TF-HULL Biofouling Cleaning Robot Tether Construction
Engineered with longitudinally water-blocked power, optical and optional fluid-sampling elements, balanced synthetic fiber strength members and barnacle-resistant buoyant outer sheaths.

| Component | Material and construction |
|---|---|
| 1. Power Conductors (Tinned/Bare Class 5/6 Copper or Lightweight Aluminum Alloy) | IEC 60228 Class 5/6 flexible tinned or bare copper conductors (1.5 mm² to 25 mm²) insulated with thin-wall crosslinked HDPE, XLPE, PP or ETFE; lightweight aluminum-alloy power cores available on weight-critical 24XM308 / 12GAX64 builds. |
| 2. Optical & High-Speed Data Elements (FIMT Fiber or Subsea Cat 6) | 4 to 12 single-mode (ITU-T G.657.A2) or multimode (50/125 OM3) fibers housed inside a crush-resistant gel-filled stainless-steel tube (FIMT) with PE jacket, or 4×2×24 AWG 100-ohm shielded subsea Cat 6 data core. |
| 3. Optional Polyamide (PA) Sampling / Flushing Micro-Tube & Water-Blocking | Optional chemical-resistant polyamide tube (for antifouling biocide/effluent monitoring or pressure sensor reference) laid up with solid/silicone water-blocking compound and super-absorbent swelling tapes. |
| 4. Closed-Cell Buoyancy Layer & Aramid / LCP Tensile Braid | Hydrostatic pressure-rated cellular polyolefin or syntactic foam inner sheath paired with torque-balanced high-modulus aramid or liquid-crystal-polymer (LCP) fiber braid (5 kN to 70 kN breaking load). |
| 5. Barnacle-Cut & Hydrocarbon-Resistant Outer Sheath | Hydrolysis- and UV-stabilized Shore 94A matte polyether PUR (Neon Yellow, Fluorescent Orange or Black; oil/diesel/crude resistant on heavy grades) or low-friction slick UV-LDPE sheath. |
TF-HULL Power Tiers & GAX / XM Reference Code Breakdown
- TF-HULL-3K .. 75K: TEBAOFLEX hull-cleaning ROV hybrid tether sized by vehicle shaft/thruster power (3 kW grooming up to 75 kW heavy cavitation/brush)
- 8GAX50 / 12GAX49 / 3GAX47: Compact mini-ROV (11.3 mm), slick LDPE abrasion-resistant (17.0 mm) and 70 kN long-range (23.0 mm) neutrally buoyant tether equivalents
- 24XM308 / 12GAX64: Weight-balanced tinned-copper + aluminum-alloy electro-optical (22.7 mm) and subsea Cat 6 (31.1 mm) neutral tether builds
- 13XM469 / 12XM463 / 12XM388: High-power hull-cleaning ROV buoyant hybrid umbilicals (17.0 mm PA-tube, 33.6 mm FR-PUR and 39.25 mm crude/diesel-resistant PUR)
- -NY / -FO / -LDPE: Outer jacket options: turbid-water Neon Yellow PUR (-NY), Fluorescent Orange PUR (-FO), or low-drag UV-LDPE (-LDPE)
TF-HULL In-Water Hull Cleaning, Grooming & Port ROV Duty
Built for commercial port hull-grooming drones, high-power cavitation/brush IWHC vehicles, biofouling capture ROVs and long-reach hull inspection.

- Proactive ship hull grooming robots and magnetic/suction-adhesion slime-wiping vehicles operating at berth or anchorage.
- High-power rotary brush and hydrodynamic cavitation hull-cleaning ROVs (15–75 kW) with effluent filtration and propeller polishing.
- Sea-chest grating, bulbous bow, thruster tunnel, rudder stock and niche-area biofouling inspection and cleaning vehicles.
- Turbid-water port security, submerged hull contraband sweeps and long-range dam/outfall tunnel inspection ROVs (up to 7,000 m single length on 3GAX47 grade).
TF-HULL Buoyant Tether vs Magnetic Crawler & Hydraulic Umbilicals
| Umbilical / Tether Family | Primary Vehicle & Duty | Weight / Buoyancy Profile | Best Engineering Fit |
|---|---|---|---|
| TF-HULL Tether (this page) | 3–75 kW floating/swimming & suction IWHC robots | Neutral or slightly floating (-35 to 0 kg/km) | In-water ship hull biofouling grooming, brush & cavitation ROVs |
| TF-MCR Magnetic Crawler Cable | Dry-dock & amphibious magnetic wheeled crawlers | Ultra-low air weight (112–740 kg/km) to prevent de-mag | 25–40 m vertical hull UHP hydroblasting, grit blasting & NDT |
| TF-HULLUMB Hydraulic Umbilical | 172–350 bar hydraulic brush-cart hull cleaners | Multi-hose thermoplastic bundle (-561 kg/km buoyant) | Twin/triple hydraulic brush carts & diver brush tools |
| DLRB / 2GAX–8GAX Mini Tether | Micro observation ROVs (250–300 V, 26 AWG) | Ultra-slim Ø 4.0–8.2 mm neutral buoyancy | Light visual hull & sea-chest camera inspection only |
Does your hull-cleaning vehicle swim/hover with thrusters or climb dry vertical hull plates on permanent magnets? Use buoyant TF-HULL in water so slack floats clear of propellers; use ultralight TF-MCR in dry dock where foam flotation adds dead weight in air.
TF-HULL Hull-Cleaning Robot Tether Engineering RFQ Checklist
- Vehicle electrical load (kW, operating voltage in V DC or V AC, max current, and tether run length in meters, e.g., 100 m, 250 m or 400 m).
- Conductor preference: standard Class 5/6 tinned or bare copper, or custom lightweight aluminum-alloy power cores (24XM308 / 12GAX64 type).
- Optical / data / fluid core count: SM G.657.A2 or MM OM3 fiber count, subsea Cat 6 pairs, and any polyamide (PA) sampling micro-tube ID/OD.
- Target water density (river/brackish SG 1.000 vs seawater SG 1.026) and outer jacket choice (Shore 94A Neon Yellow / Fluorescent Orange / Black PUR, hydrocarbon-resistant PUR, or slick UV-LDPE).
- Required continuous reel length(s) (supplied as bulk cable with heat-shrink water-blocking end caps; MOQ 50 m, lead time 7 to 45 working days).
Related selection resources
- Explore TEBAOFLEX Custom Subsea, ROV & Marine Umbilical Solutions
- Browse all Marine, Offshore & Underwater Robot Cables
- Compare DLRB & 2GAX–8GAX Slim Neutrally Buoyant Observation ROV Tethers
- Compare RM-Series Heavy Steel-Armoured ROV Main Lift Umbilicals
- Engineering guide: ROV main-lift umbilical vs neutral tether vs deck cable
- Engineering guide: Umbilical winch drum groove & sheave diameter matching
TF-HULL Ship Hull Biofouling Cleaning Robot Tether FAQ
Why do ship hull biofouling cleaning robots require slightly positive or neutral buoyancy on TF-HULL tether cables?
0 to -30 g/m tuned buoyancy keeps unused tether slack floating near the water surface away from rudder pintles, bilge keels, thruster tunnels and seabed debris while minimizing hydrodynamic drag on the cleaning vehicle.
How does the TF-HULL outer jacket resist barnacle shell cuts and port fuel slicks?
Shore 94A high-tear polyether polyurethane (or high-density slick UV-LDPE on 12GAX49 / 3GAX47 builds) resists slicing against sharp calcareous barnacles and oyster shells, while oil-resistant matte PUR grades (12XM388) withstand crude oil, diesel, naphtha and antifouling paint residue.
Can TF-HULL be manufactured with lightweight aluminum-alloy power conductors or high-visibility turbid-water jackets?
Yes — alongside standard Class 5/6 tinned and bare copper conductors, we manufacture custom aluminum-alloy subsea power cores (matching 12GAX64 and 24XM308 weight budgets) and extrude Neon Yellow or Fluorescent Orange PUR sheaths for murky harbor visibility without fragile electroluminescent wires.
Does TF-HULL ship with pre-molded subsea connectors or as bulk cable on reels?
100% of TF-HULL orders are delivered as continuous cut-to-length bulk cable on wooden drums with heat-shrink water-blocking end caps so your team can terminate and pot subsea wet-mateable plugs and strain-relief grips matching your exact vehicle bulkhead.
What is the minimum order quantity and production lead time for TF-HULL hull-cleaning robot tethers?
50 m minimum order quantity per specification, custom-extruded and tested with delivery in 7 to 45 working days.
TF-HULL (3–75 kW & 8GAX / XM Series) Tether Schedule
TF-HULL Buoyancy Trim, Barnacle-Cut Jacket & 50 m MOQ
- Harbor seawater buoyancy tuning: Formulated for exact neutral or slightly floating trim (-35 to +20 g/m) across river-estuary anchorages (SG 1.000) and ocean ports (SG 1.025–1.028) to keep slack clear of vessel propellers and thrusters
- Barnacle-cut & bunker-oil jacket: High-tear Shore 94A hydrolysis-resistant polyether PUR (or slick low-friction UV-LDPE) resists razor-sharp barnacle/oyster shells, port bunker fuel, diesel, crude residue and copper antifouling leachates
- 3–75 kW copper or Al-alloy cores: Standard IEC 60228 Class 5/6 tinned or bare copper power cores with syntactic foam flotation, plus optional lightweight aluminum-alloy subsea power conductors (24XM308 / 12GAX64 builds)
- FIMT fiber, Cat 6 & PA micro-tube: Integrates laser-welded stainless-steel tube G.657.A2 fibers, 100-ohm subsea Cat 6 Ethernet and optional polyamide (PA) water-quality / biocapture sampling micro-hoses
- Continuous bulk reel, MOQ 50 m: Delivered as continuous cut-to-length bulk cable on wooden drums with heat-shrink water-blocking end caps (connectors field-potted by client); MOQ 50 m in 7 to 45 working days
| Parameter | Value |
|---|---|
| Rated voltage | 400 to 1000 V DC (Power-over-Tether) and 0.6/1 kV AC power cores; 250 to 300 V signal and data pairs |
| Conductor options | IEC 60228 Class 5 or Class 6 tinned or bare copper (1.5 to 25 mm2), plus custom lightweight aluminum-alloy subsea power cores |
| Buoyancy and water-blocking | Custom neutral or slightly floating trim (-35 to +20 kg/km) tuned to fresh/brackish (SG 1.000) or seawater (SG 1.025 to 1.028); longitudinal water-blocked |
| Strength member and jacket | Torque-balanced aramid or LCP yarn braid (5 to 70 kN MBL); Shore 94A cut-resistant PUR (Neon Yellow, Fluorescent Orange, Black) or slick UV-LDPE |
| Supply form and MOQ | Continuous bulk cable on wooden drums with heat-shrink water-blocking end caps (no pre-potted connectors); MOQ 50 m in 7 to 45 working days |
| Operating temperature and depth | -30 °C to +80 °C dynamic marine operation; syntactic/cellular flotation rated from shallow port surface down to 300 m (up to 500 m on solid builds) |
| Hydrocarbon and chemical resistance | Resistant to seawater, harbor bunker fuel, diesel, crude oil slicks, condensate, naphtha and copper/zinc antifouling paint leachates |
TF-HULL (3–75 kW) Hull Biofouling Cleaning Robot Tether Schedule
| Model & Power Tier | Power & Control Cores | Optical / Ethernet & Tube | Nom. OD (mm) | Seawater Weight SG 1.026 (kg/km) | Min. Breaking Load (kN) | Min. Dyn. Bend Radius (mm) | Next step |
|---|---|---|---|---|---|---|---|
| TF-HULL-3K (Grooming) | 4 × 1.5 mm² (600/1,000 V) | Subsea Cat 6 (4P×24 AWG) | 13.8 | -5 (Slightly Floating) | 8.5 | 140 | Request this size |
| TF-HULL-7K (Light IWHC) | 4 × 2.5 mm² + 2 × 0.5 mm² | 4 SM G.657.A2 FIMT | 16.5 | -8 (Slightly Floating) | 15.0 | 165 | Request this size |
| TF-HULL-15K (Brush/Jet) | 4 × 6.0 mm² + 2P × 0.34 mm² | 4 SM + 4 MM FIMT + PA Tube | 22.8 | 0 to -12 (Neutral/Float) | 25.0 | 230 | Request this size |
| TF-HULL-30K (Cavitation) | 3 × 10 + 1G6 mm² (0.6/1 kV) | 8 SM/MM FIMT + PA Tube | 28.5 | 0 to -18 (Neutral/Float) | 38.0 | 285 | Request this size |
| TF-HULL-50K (Work IWHC) | 3 × 16 + 1G10 mm² (0.6/1 kV) | 8 SM FIMT + 2P × 0.5 mm² | 33.6 | 0 to -25 (Buoyant PUR) | 50.0 | 340 | Request this size |
| TF-HULL-75K (Heavy IWHC) | 3 × 25 + 1G16 mm² (Cu or Al-Alloy) | 8 SM FIMT + 4P × 0.5 mm² | 39.2 | 0 to -30 (Buoyant Oil-PUR) | 65.0 | 395 | Request this size |
TF-HULL (8GAX / 3GAX / XM Series) Cross-Reference Tether Schedule
| Model & Cross-Reference | Conductor & Core Makeup | Data / Fiber / Tube Element | Nom. OD (mm) | Jacket & Buoyancy Design | Breaking Load (kN) | Bulk Reel MOQ | Next step |
|---|---|---|---|---|---|---|---|
| TF-HULL 8GAX50 | Tinned Cu power + signal cores (HDPE) | Twisted telemetry pairs | 11.3 | Foam PUR + UV-PUR (Neutral) | 6.0 | 50 m | Request this size |
| TF-HULL 12GAX49 | Bare Cu heavy-duty ROV power/control | Control & video pairs | 17.0 | Foamed polyolefin + slick UV-LDPE | 18.0 | 50 m | Request this size |
| TF-HULL 13XM469 | Tinned Cu + XLPE / ETFE power cores | SM/MM FIMT + Polyamide (PA) hose | 17.0 | LCP/Aramid + matte UV-PUR (Buoyant) | 20.0 | 50 m | Request this size |
| TF-HULL 24XM308 | Balanced Tinned Cu + Al-Alloy power (PP) | Electro-optical SM/MM fiber unit | 22.7 | Swelling waterblock + Aramid + PUR | 28.0 | 50 m | Request this size |
| TF-HULL 3GAX47 | XL-HDPE power/signal + TCWB overall screen | Single-mode long-range fiber unit | 23.0 | Aramid + UV-LDPE (Neutral, up to 7 km) | 68.6 (7,000 kg) | 50 m | Request this size |
| TF-HULL 12GAX64 | Lightweight Aluminum-Alloy power (PE) | Integrated flexible subsea Cat 6 | 31.1 | Aramid braid + UV-PUR (Neutral) | 35.0 | 50 m | Request this size |
| TF-HULL 12XM463 | High-power tinned Cu + XLPE cores | MM/SM FIMT + glass/aramid barrier | 33.6 | Halogen-free flame-retardant PUR (Buoyant) | 45.0 | 50 m | Request this size |
| TF-HULL 12XM388 | High-power bare Cu + XL-HDPE cores | 4-pair SM fiber unit + waterblock | 39.25 | Crude/naphtha/diesel-resistant matte PUR | 60.0 | 50 m | Request this size |
Note on harbor salinity and conductor selection: freshwater river ports (such as anchorage basins at SG 1.000) provide 2.6% less buoyant lift than open ocean ports (SG 1.026). State your target port salinity and whether you prefer standard tinned/bare copper or lightweight aluminum-alloy conductors (as in 24XM308 and 12GAX64) so our engineers lock foam density prior to extrusion.
ASCII part references for BOM and ERP entry: TF-HULL-3K, TF-HULL-7K, TF-HULL-15K, TF-HULL-30K, TF-HULL-50K, TF-HULL-75K, TF-HULL-8GAX50, TF-HULL-12GAX49, TF-HULL-13XM469, TF-HULL-24XM308, TF-HULL-3GAX47, TF-HULL-12GAX64, TF-HULL-12XM463, TF-HULL-12XM388.
TF-HULL Subsea Umbilical & Fiber Reference Standards
| Standard or specification | Application |
|---|---|
| IEC 60228 Class 5 / Class 6 & Custom Aluminum-Alloy Subsea Conductors | Flexible multi-strand bare/tinned electrolytic copper conductors and weight-saving marine aluminum-alloy power conductors. |
| ISO 13628-5 / IEC 60794-3 & Longitudinal Water-Blocking Design | Subsea umbilical layout, crush-resistant stainless-steel optical tube (FIMT) attenuation control and dry swelling water-blocking verification. |
Certifications and document support
TEBAOFLEX ISO 9001 quality management and hydrostatic/electrical factory verification
ISO 13628-5 — Design and verification principles for subsea electro-optical umbilicals
IEC 60794-3 — Optical fibre cables for submarine and harsh outdoor environments
Related cable options
Compare these cable options by service combination, movement, load, voltage and transmission requirement.
TF-OWIND Offshore Wind Monopile, Jacket & Mooring Chain Cleaning & NDT Crawler Dynamic Umbilical Cable (690 V–3.3 kV)
A related cable option for a different application or duty profile.
View productTF-DRONE Underwater Cleaning & Inspection Drone Buoyant Micro-Tether Cable (1GAX119 Coax, 2GAX113 Anti-Kink Fiber, 2GAX123 & 600V PoT)
A related cable option for a different application or duty profile.
View productTF-MCR Magnetic Hull Crawling Robot Umbilical Cable — Ultralight Aramid/LCP Hydroblasting, NDT & Amphibious Crawler Tether (XM520–XM554)
A related cable option for a different application or duty profile.
View productRequest a cable recommendation and quotation
Send the required services, cable length, mechanical duty, environment, termination and quantity. Our team will review the application before quoting.
- Include the product name or SKU plus the required cable length and quantity.
- Attach a specification, drawing or data sheet when available.




