Marine & Offshore Cables TEBAOFLEX

TF-DRONE Underwater Cleaning & Inspection Drone Buoyant Micro-Tether Cable (1GAX119 Coax, 2GAX113 Anti-Kink Fiber, 2GAX123 & 600V PoT)

TF-DRONE (TF-DRONE-TETHER) is an ultra-slim neutrally and slightly positively buoyant micro-tether cable family (Ø 4.00 mm to Ø 9.80 mm) engineered for portable underwater cleaning drones, hull-grooming micro-UUVs, hydroelectric dam penstock drones and 600 V DC surface-powered mini-ROVs. Covers 1GAX119 buoyant micro-coax, 2GAX113 anti-kink single-mode fiber, 2GAX123 250 m crush-resistant twisted-pair and 600 V DC asymmetric 5-pair Power-over-Tether builds.

Product information
SKU
TF-DRONE-TETHER
Brand
TEBAOFLEX
Product overview

TF-DRONE underwater drone tether cables combine freshwater-neutral (SG 1.000) or seawater-slightly-buoyant (SG 1.026) flotation trim, high-modulus liquid-crystal-polymer (LCP) or aramid yarn braids (500 N to 4,000 N breaking load), and calibrated Ø 4.00 mm to Ø 9.80 mm outer diameters for portable underwater cleaning drones, hull-inspection micro-ROVs and dam/potable-water tunnel UUVs.

Battery-powered and surface-fed underwater drones fail when paired with generic copper data cords or low-density open-cell foam tethers: stiff jackets hockle and kink on compact hand reels, uncalibrated Ø 10+ mm diameters stall small thrusters in 1.5-knot currents, and ordinary foamed jackets crush permanently below 80–100 m depth, turning a floating cable into a sinking drag anchor. Even worse, oversize or oval outer sheaths leak inside 3.7–9.8 mm compression-seal hull penetrators. TF-DRONE solves each failure mode with torque-balanced LCP/aramid tensile braids, longitudinal water-blocking fillers, 250–400 m crush-resistant micro-cellular flotation, and tight concentric extrusion.

Choose direct dimensional builds matching European subsea drone references 1GAX119 (Ø 4.00 mm freshwater-neutral micro-coax), 2GAX113 (Ø 4.00 mm anti-kink single-mode optical tether) and 2GAX123 (Ø 4.10 mm 250 m repeatable-dive twisted-pair), or specify TF-DRONE-600V5P (Ø 9.80 mm 600 V DC asymmetric 23/24/26 AWG 5-pair for 1.0–1.5 kW topside power units) and TF-DRONE-8CNB (8-core video + RS-485 + auxiliary power). Delivered on 200 m minimum reels in 7 to 45 working days.

Explore the marine, offshore and shipboard cable range for related configurations.

Construction

TF-DRONE Underwater Drone Micro-Tether Cable Construction

Concentric micro-extrusion pairs low-attenuation copper, coaxial or bend-insensitive optical cores with hydrostatic crush-resistant flotation and compression-penetrator-ready outer sheaths.

Clean 2D circular engineering cross-section of TF-DRONE 600 V DC 5-pair buoyant underwater drone tether cable showing outer PUR jacket, concentric closed-cell flotation ring, golden aramid strength braid, two larger 23 AWG power pairs, one 24 AWG ground pair and two 26 AWG signal pairs
Cross-section (TF-DRONE-600V5P Ø 9.80 mm): two 23 AWG 600 V DC power pairs, one 24 AWG ground pair and two 26 AWG 100-ohm data pairs inside a penetrator-calibrated buoyant jacket.
TF-DRONE Underwater Cleaning & Inspection Drone Buoyant Micro-Tether Cable (1GAX119 Coax, 2GAX113 Anti-Kink Fiber, 2GAX123 & 600V PoT) construction
ComponentMaterial and construction
1. Signal, Optical or Asymmetric 600 V DC Power ConductorsStranded tinned copper twisted pairs (26 AWG 7×0.16 mm on 2GAX123; asymmetric 2×23 AWG power + 1×24 AWG ground + 2×26 AWG data pairs on TF-DRONE-600V5P), 75/50-ohm foamed-polyolefin coax (1GAX119), or ITU-T G.657.A2 bend-insensitive single-mode fibers (2GAX113).
2. Dielectric Insulation & EMI ScreeningLow-capacitance HDPE, foamed polyolefin or thin-wall copolymer insulation (100-ohm differential pair impedance); dual aluminum/polyester foil plus tinned-copper braid shield on 1GAX119 coaxial builds.
3. Longitudinal Water-Blocking Core BarrierDry water-swellable yarns, tapes and flexible water-blocking fillers prevent axial capillary flooding into subsea electronics enclosures if the jacket is nicked against hull plates or intake grates.
4. Torque-Balanced LCP or Aramid Yarn Braid & Syntactic Foam LayerHigh-modulus LCP or aramid fiber braid (500 N to 4,000 N breaking strength) decoupled from the core, paired with a closed-cell foamed TPR or foamed PUR buoyancy layer rated for repeated 250–400 m hydrostatic cycles.
5. Penetrator-Calibrated PUR, Anti-Kink PE or Slick UV-LDPE Outer JacketHydrolysis- and UV-stabilized polyether PUR (Neon Yellow, Fluorescent Orange or Matte Black) engineered for two-part potting adhesion and 3.7–9.8 mm compression glands, or low-friction UV-LDPE / anti-kink PE (1GAX119 / 2GAX113) for long-reach sliding over concrete dam walls.

TF-DRONE & 1GAX119–2GAX123 Series Designation

  • 1GAX119: Ø 4.00 mm freshwater-neutral foamed-polyolefin coaxial drone micro-tether with Al/PET + tinned-copper braid shield and slick UV-LDPE sheath
  • 2GAX113: Ø 4.00 mm anti-kink neutrally buoyant single-mode (G.657.A2) optical fiber drone tether with aramid braid and torque-balanced PE jacket
  • 2GAX123: Ø 4.10 mm 250 m repeatable-dive crush-resistant buoyant twisted-pair drone tether with LCP yarn braid (500 N) and PUR jacket
  • TF-DRONE-600V5P / 600V3P: Ø 7.80–9.80 mm 600 V DC asymmetric multi-pair Power-over-Tether cables for 0.8–1.5 kW surface-powered cleaning and inspection drones
  • TF-DRONE-8CNB: Ø 8.20 mm 8-conductor neutral-buoyancy video, RS-485 and auxiliary power tether rated to 400 m depth (continuous reels up to 500 m)
Applications

TF-DRONE Cleaning Drones, Dam Penstocks & 600V PoT Duty

Purpose-built for portable underwater cleaning drones, proactive ship-hull slime grooming UUVs, hydro-dam penstock inspection drones and surface-powered mini-ROVs.

Compact yellow underwater hull-grooming and inspection drone hovering beside a ship waterline and hydroelectric intake wall while trailing a slim floating high-visibility yellow TF-DRONE micro-tether cable
Portable underwater cleaning and inspection drone operating in harbor current on a low-drag floating TF-DRONE micro-tether.
  • Portable underwater hull-cleaning and slime-grooming drones requiring 600 V DC 1.0–1.5 kW continuous surface power and 100 Mbps telemetry through a single Ø 7.8–9.8 mm floating tether.
  • Hydroelectric dam penstocks, potable-water reservoirs, cooling-water intakes and flooded mine galleries requiring freshwater-neutral (SG 1.000) Ø 4.00 mm coax (1GAX119) or anti-kink optical (2GAX113) micro-tethers.
  • Shipyard UWILD hull thickness gauging, sea-chest inspection, propeller checks and ballast-tank micro-ROVs diving repeatedly to 100–250 m (2GAX123 / TF-DRONE-8CNB).
  • Aquaculture cage camera drones, scientific UUVs and USV-deployed micro-winch inspection vehicles demanding tight bend radii (10 × OD dynamic) without spool hockling.

TF-DRONE vs 2GAX160–8GAX163 vs Cat5e FTP vs TF-HULL Tethers

TF-DRONE Micro-Tethers vs 2GAX160–8GAX163 26 AWG Pairs vs Cat5e FTP ROV Tether vs TF-HULL Heavy Cleaning Tether
Tether SeriesCore ArchitectureOuter Diameter & MOQTarget Underwater Vehicle
TF-DRONE & GAX113–123 (this page)4mm Coax / Anti-Kink FO / 250m Pair / 600V 5-PairØ 4.00–9.80 mm (200 m reel MOQ)Portable cleaning/grooming drones, dam UUVs & 1 kW topside mini-ROVs
2GAX160–8GAX163 / DLRB Series1–4 uniform 26 AWG twisted pairs (250–300 V)Ø 4.00–11.0 mm (200 m / 50 m MOQ)Battery micro-ROVs using standard 1-pair or 4-pair PLC telemetry
TF-NBCAT5E Shielded FTP Tether4×2×24 AWG Foil-Shielded Cat5e / Cat6Ø 7.0–9.8 mm (200 m reel MOQ)Short-range (<100 m) direct Gigabit RJ45 Ethernet ROVs & cameras
TF-HULL Biofouling Cleaning Tether3–75 kW 3-phase / HV DC + FIMT FiberØ 11.3–39.25 mm (50 m MOQ)Heavy rotary-brush & cavitation ship-hull cleaning ROVs

Running a 15–75 kW commercial rotary-brush or cavitation ship-hull cleaning vehicle? Step up to our TF-HULL Ship Hull Biofouling Cleaning Robot Tether page.

TF-DRONE Underwater Drone Micro-Tether RFQ Checklist

  • Target model code (1GAX119 coax, 2GAX113 anti-kink fiber, 2GAX123 250 m twisted-pair, TF-DRONE-8CNB or TF-DRONE-600V5P) or custom conductor/fiber schedule.
  • Topside power mode: onboard drone battery (signal-only micro-tether) or surface power supply (specify DC bus voltage, e.g., 400 V DC or 600 V DC, and continuous watts).
  • Water environment & dive depth: freshwater dam/reservoir (SG 1.000) or seawater port/offshore (SG 1.026), plus maximum repeatable dive depth (e.g., 100 m, 250 m or 400 m).
  • Mechanical termination constraint: compression-gland penetrator bore range (e.g., 3.7–4.5 mm or 9.5–10.0 mm) or two-part resin potting requirement (PUR vs slick LDPE jacket).
  • Reel length & quantity (200 m standard reel MOQ; 200 m, 300 m, 500 m or custom continuous lengths shipped with heat-shrink end caps in 7 to 45 working days).

Related selection resources

TF-DRONE Underwater Drone Buoyant Tether FAQ

Why do standard foamed ROV tethers lose buoyancy below 100 m, and how does TF-DRONE 2GAX123 prevent it?

250 m repeatable hydrostatic pressure rating (25 bar) is achieved on TF-DRONE 2GAX123 using high-compressive-strength closed-cell micro-cellular polymer compound instead of soft low-density gas-blown foam, preventing cell wall rupture so the Ø 4.10 mm tether returns to exact neutral freshwater trim dive after dive.

Should I choose a polyether PUR jacket or UV-LDPE / PE jacket on TF-DRONE (1GAX119 / 2GAX113) tethers?

2 jacket chemistries serve distinct terminations: choose polyether PUR (2GAX123, TF-DRONE-600V5P, 8CNB) when you pot subsea connectors with two-part epoxy/polyurethane resin or seal inside O-ring compression penetrators; choose slick UV-LDPE or anti-kink PE (1GAX119, 2GAX113) when mechanical Kellum grips are used and ultra-low sliding friction over concrete dam walls is priority.

Can TF-DRONE-600V5P fit standard 9.8 mm compression-gland hull penetrators for 1 kW surface-powered drones?

Yes — TF-DRONE-600V5P is concentric-extruded to Ø 9.80 ± 0.25 mm with two 23 AWG 600 V DC power pairs, one 24 AWG ground pair and two 26 AWG 100-ohm data pairs, sealing cleanly inside standard 9.5–10.0 mm compression penetrators.

How does TF-DRONE 2GAX113 prevent optical fiber kinking and attenuation spikes on small hand spools?

4.00 mm torque-balanced aramid braid combined with a controlled-modulus anti-kink polyethylene jacket resists twist memory (hockling) during slack payoff, while ITU-T G.657.A2 bend-insensitive single-mode glass maintains < 0.2 dB loss even at 15 mm bend radii.

Do you supply TF-DRONE tethers with pre-installed wet-mate plugs or power supply boxes, and what is the MOQ?

200 m standard reel is our minimum order quantity, supplied strictly as continuous un-terminated bulk cable with heat-shrink water-blocking end caps (compression penetrators and subsea plugs are installed by the vehicle integrator) in 7 to 45 working days.

Specifications

TF-DRONE (1GAX119, 2GAX113, 2GAX123 & 600V 5-Pair) Schedule

TF-DRONE Buoyancy Trim, Gland Tolerance & 200 m MOQ

  • Ultra-low-drag Ø 4.0–9.8 mm profile: Cuts hydrodynamic cross-flow drag by up to 60% versus standard 12–16 mm ROV umbilicals so compact 5–25 kg underwater drones hold heading in port currents and penstocks
  • 250 m repeatable-dive syntactic foam: High-compressive-strength closed-cell flotation core (2GAX123 / TF-DRONE-600V5P) withstands repeated 250–400 m dives without permanent foam collapse or buoyancy loss
  • Coax, anti-kink fiber & 600 V DC 5-pair: Available in 75/50-ohm micro-coax (1GAX119), non-hockling G.657.A2 optical fiber (2GAX113), 26 AWG twisted pairs (2GAX123) and 600 V DC 23/24/26 AWG 5-pair topside power
  • Penetrator gland & potting calibrated: Tight ±0.15 to ±0.25 mm outer-diameter concentricity fits 3.7–9.8 mm compression gland penetrators, with bondable polyether PUR or slick low-friction UV-LDPE jackets
  • 200 m standard reel MOQ, splice-free: Supplied as continuous un-terminated bulk cable from 200 m standard reels (up to 3,000 m optical single lengths) with heat-shrink water-blocking end caps in 7 to 45 working days
TF-DRONE Underwater Cleaning & Inspection Drone Buoyant Micro-Tether Cable (1GAX119 Coax, 2GAX113 Anti-Kink Fiber, 2GAX123 & 600V PoT) technical data
ParameterValue
Rated voltage250 to 300 V DC on 2GAX123, 1GAX119 and 8CNB signal/coax builds; 600 V DC topside power transmission on TF-DRONE-600V5P and 600V3P; all-dielectric 0 V on 2GAX113
Outer diameter and gland tolerance4.00 mm (1GAX119, 2GAX113), 4.10 mm (2GAX123), 4.80 mm (HYB48), 7.80 mm (600V3P), 8.20 mm (8CNB) and 9.80 mm (600V5P) held within +-0.15 to +-0.25 mm for compression penetrators
Buoyancy and depth stabilityFreshwater neutral (0 kg/km at SG 1.000) and seawater slightly buoyant (-1 to -4 kg/km at SG 1.026); crush-resistant closed-cell foam rated for repeated 250 m to 400 m dives
Tensile member and jacket optionsTorque-balanced LCP or aramid yarn braid (500 N to 4,000 N breaking load); potting-ready polyether PUR (Yellow, Fluorescent Orange, Black), anti-kink PE or slick UV-LDPE
Supply form and MOQ200 m standard reel MOQ (available in 200 m, 300 m, 500 m and up to 3,000 m continuous un-terminated bulk lengths with heat-shrink end caps) in 7 to 45 working days
Operating temperature and bend radius-30 °C to +80 °C dynamic underwater and deck reel service; minimum static bend radius 6 × OD, dynamic micro-spool bend radius 10 to 12 × OD
Potting and penetrator compatibilityPolyether PUR sheaths bond cleanly with two-part polyurethane/epoxy potting compounds and seal directly in 3.7 to 9.8 mm O-ring compression penetrators

1GAX119, 2GAX113, 2GAX123 & 8-Core Ultra-Slim Drone Micro-Tether Schedule

TF-DRONE & GAX113–123 Ultra-Slim Underwater Drone Micro-Tether Schedule (Ø 4.00 mm to Ø 8.20 mm)
Model CodeCore / Media ConstructionStrength Braid & MBLNom. OD & Tol. (mm)Fresh / Seawater Wt (kg/km)Jacket & Penetrator / Dive RatingNext step
TF-DRONE 1GAX119 (Micro-Coax)75 Ω (or 50 Ω) Foamed Polyolefin Coax + Al/PET + TC BraidLCP Yarn Braid (600 N)4.00 ± 0.150 / -1.5 (Fresh Neutral)Foamed TPR + Slick UV-LDPE; 3.7–4.5 mm GlandRequest this size
TF-DRONE 2GAX113 (Anti-Kink FO)1–2 × 9/125 µm Bend-Insensitive SM Fiber (G.657.A2)Aramid Yarn Braid (900 N)4.00 ± 0.150 / -1.0 (Neutral)Anti-Kink PE Jacket; Non-Hockling up to 3,000 mRequest this size
TF-DRONE 2GAX123 (250m Pair)1–2 × (2×26 AWG) Tinned Cu + HDPE + Water-Block FillerLCP Yarn Braid (500 N)4.10 ± 0.150 / -2.0 (250m Stable)Crush-Resistant Foam + PUR; ≥250 m Repeated DivesRequest this size
TF-DRONE-HYB482 × 22 AWG DC Aux + 1 × SM G.657.A2 Optical FiberAramid Braid (1,800 N)4.80 ± 0.20-1 / -3.0 (Buoyant)Neon Yellow Bondable PUR; 4.5–5.5 mm GlandRequest this size
TF-DRONE-8CNB8 Cores: Video Pair + RS-485 Pair + 2×18 AWG + 2C AuxAramid Braid (3,200 N)8.20 ± 0.250 / -3.5 (Neutral)Orange PUR; 400 m Depth, 8-Pin Pinout Ready (≤500 m)Request this size

600 V DC Surface-Powered Cleaning & Inspection Drone Hybrid Tether Schedule

TF-DRONE 600 V DC Asymmetric Multi-Pair Surface-Powered Cleaning & Inspection Drone Tether Schedule
Model CodePower & Telemetry Pair LayoutRated Voltage & PowerNom. OD & Tol. (mm)Fresh / Seawater Wt (kg/km)Flotation, Jacket & Gland FitNext step
TF-DRONE-600V3P1×20 AWG Power Pair + 2×26 AWG (100 Ω VDSL/PLC Pairs)600 V DC (0.8–1.2 kW)7.80 ± 0.200 / -3.0Foamed PUR + Yellow PUR; Fits 7.5–8.2 mm GlandRequest this size
TF-DRONE-400V-EO2×20 AWG Power Cores + 2 × SM G.657.A2 Optical Fibers400–600 V DC (1.5 kW)9.20 ± 0.25+1 / -2.0250m Syntactic Foam + Orange PUR; 9.0–9.8 mm GlandRequest this size
TF-DRONE-600V5P2×23 AWG Power Pairs + 1×24 AWG GND Pair + 2×26 AWG Data Pairs600 V DC (1.0–1.5 kW)9.80 ± 0.250 / -4.0Foamed PUR + Bondable PUR + Aramid; Fits 9.5–10 mm GlandRequest this size

Why asymmetric 5-pair (TF-DRONE-600V5P) outperforms standard Cat5e for topside-powered cleaning drones: paralleling two 23 AWG pairs for 600 V DC propulsion plus a dedicated 24 AWG ground-reference pair triples copper cross-section over 26 AWG cords while keeping two isolated 26 AWG 100-ohm twisted pairs for interference-free VDSL/Ethernet telemetry inside a single Ø 9.80 mm compression-gland envelope.

ASCII part references for BOM and ERP entry: TF-DRONE-1GAX119, TF-DRONE-2GAX113, TF-DRONE-2GAX123, TF-DRONE-HYB48, TF-DRONE-8CNB, TF-DRONE-600V3P, TF-DRONE-400V-EO, TF-DRONE-600V5P.

Standards

TF-DRONE Coaxial, Bend-Insensitive Optical & Copper Standards

TF-DRONE Underwater Cleaning & Inspection Drone Buoyant Micro-Tether Cable (1GAX119 Coax, 2GAX113 Anti-Kink Fiber, 2GAX123 & 600V PoT) standards and test references
Standard or specificationApplication
ASTM B33 / IEC 60228 Stranded Tinned Copper & 100-Ohm Pair BalanceFine-stranded corrosion-resistant tinned copper conductors with controlled-capacitance HDPE/polyolefin insulation for VDSL/PLC telemetry up to 500 m.
IEC 61196 Micro-Coaxial & ITU-T G.657.A2 Bend-Insensitive Optical StandardsLow-loss foamed-dielectric 75/50-ohm coaxial core (1GAX119) and macro-bend-insensitive G.657.A2 single-mode fibers (2GAX113) for compact 40–80 mm drone spools.

Certifications and document support

TEBAOFLEX ISO 9001 quality system, OTDR optical trace and HV spark testing

ITU-T G.657.A2 Bend-Insensitive Single-Mode Optical Fiber Standard

IEC 61196 — Coaxial communication cables for RF and video transmission

Compare by duty

Related cable options

Compare these cable options by service combination, movement, load, voltage and transmission requirement.

Engineering-led quotation

Request a cable recommendation and quotation

Send the required services, cable length, mechanical duty, environment, termination and quantity. Our team will review the application before quoting.

  • Include the product name or SKU plus the required cable length and quantity.
  • Attach a specification, drawing or data sheet when available.

    MOQ 50 m · Engineering reply within 24 hours

    By submitting this form, you agree that TEBAOFLEX may use the contact information and files provided to review and respond to your enquiry. Files are used for quotation and engineering communication related to your request. See our Privacy Policy for current data handling and retention information.

    Email or WhatsApp is enough. Please include the key cable or application details for review.