


TF-DRONE Underwater Cleaning & Inspection Drone Buoyant Micro-Tether Cable (1GAX119 Coax, 2GAX113 Anti-Kink Fiber, 2GAX123 & 600V PoT)
TF-DRONE (TF-DRONE-TETHER) is an ultra-slim neutrally and slightly positively buoyant micro-tether cable family (Ø 4.00 mm to Ø 9.80 mm) engineered for portable underwater cleaning drones, hull-grooming micro-UUVs, hydroelectric dam penstock drones and 600 V DC surface-powered mini-ROVs. Covers 1GAX119 buoyant micro-coax, 2GAX113 anti-kink single-mode fiber, 2GAX123 250 m crush-resistant twisted-pair and 600 V DC asymmetric 5-pair Power-over-Tether builds.
TF-DRONE underwater drone tether cables combine freshwater-neutral (SG 1.000) or seawater-slightly-buoyant (SG 1.026) flotation trim, high-modulus liquid-crystal-polymer (LCP) or aramid yarn braids (500 N to 4,000 N breaking load), and calibrated Ø 4.00 mm to Ø 9.80 mm outer diameters for portable underwater cleaning drones, hull-inspection micro-ROVs and dam/potable-water tunnel UUVs.
Battery-powered and surface-fed underwater drones fail when paired with generic copper data cords or low-density open-cell foam tethers: stiff jackets hockle and kink on compact hand reels, uncalibrated Ø 10+ mm diameters stall small thrusters in 1.5-knot currents, and ordinary foamed jackets crush permanently below 80–100 m depth, turning a floating cable into a sinking drag anchor. Even worse, oversize or oval outer sheaths leak inside 3.7–9.8 mm compression-seal hull penetrators. TF-DRONE solves each failure mode with torque-balanced LCP/aramid tensile braids, longitudinal water-blocking fillers, 250–400 m crush-resistant micro-cellular flotation, and tight concentric extrusion.
Choose direct dimensional builds matching European subsea drone references 1GAX119 (Ø 4.00 mm freshwater-neutral micro-coax), 2GAX113 (Ø 4.00 mm anti-kink single-mode optical tether) and 2GAX123 (Ø 4.10 mm 250 m repeatable-dive twisted-pair), or specify TF-DRONE-600V5P (Ø 9.80 mm 600 V DC asymmetric 23/24/26 AWG 5-pair for 1.0–1.5 kW topside power units) and TF-DRONE-8CNB (8-core video + RS-485 + auxiliary power). Delivered on 200 m minimum reels in 7 to 45 working days.
Explore the marine, offshore and shipboard cable range for related configurations.
TF-DRONE Underwater Drone Micro-Tether Cable Construction
Concentric micro-extrusion pairs low-attenuation copper, coaxial or bend-insensitive optical cores with hydrostatic crush-resistant flotation and compression-penetrator-ready outer sheaths.

| Component | Material and construction |
|---|---|
| 1. Signal, Optical or Asymmetric 600 V DC Power Conductors | Stranded tinned copper twisted pairs (26 AWG 7×0.16 mm on 2GAX123; asymmetric 2×23 AWG power + 1×24 AWG ground + 2×26 AWG data pairs on TF-DRONE-600V5P), 75/50-ohm foamed-polyolefin coax (1GAX119), or ITU-T G.657.A2 bend-insensitive single-mode fibers (2GAX113). |
| 2. Dielectric Insulation & EMI Screening | Low-capacitance HDPE, foamed polyolefin or thin-wall copolymer insulation (100-ohm differential pair impedance); dual aluminum/polyester foil plus tinned-copper braid shield on 1GAX119 coaxial builds. |
| 3. Longitudinal Water-Blocking Core Barrier | Dry water-swellable yarns, tapes and flexible water-blocking fillers prevent axial capillary flooding into subsea electronics enclosures if the jacket is nicked against hull plates or intake grates. |
| 4. Torque-Balanced LCP or Aramid Yarn Braid & Syntactic Foam Layer | High-modulus LCP or aramid fiber braid (500 N to 4,000 N breaking strength) decoupled from the core, paired with a closed-cell foamed TPR or foamed PUR buoyancy layer rated for repeated 250–400 m hydrostatic cycles. |
| 5. Penetrator-Calibrated PUR, Anti-Kink PE or Slick UV-LDPE Outer Jacket | Hydrolysis- and UV-stabilized polyether PUR (Neon Yellow, Fluorescent Orange or Matte Black) engineered for two-part potting adhesion and 3.7–9.8 mm compression glands, or low-friction UV-LDPE / anti-kink PE (1GAX119 / 2GAX113) for long-reach sliding over concrete dam walls. |
TF-DRONE & 1GAX119–2GAX123 Series Designation
- 1GAX119: Ø 4.00 mm freshwater-neutral foamed-polyolefin coaxial drone micro-tether with Al/PET + tinned-copper braid shield and slick UV-LDPE sheath
- 2GAX113: Ø 4.00 mm anti-kink neutrally buoyant single-mode (G.657.A2) optical fiber drone tether with aramid braid and torque-balanced PE jacket
- 2GAX123: Ø 4.10 mm 250 m repeatable-dive crush-resistant buoyant twisted-pair drone tether with LCP yarn braid (500 N) and PUR jacket
- TF-DRONE-600V5P / 600V3P: Ø 7.80–9.80 mm 600 V DC asymmetric multi-pair Power-over-Tether cables for 0.8–1.5 kW surface-powered cleaning and inspection drones
- TF-DRONE-8CNB: Ø 8.20 mm 8-conductor neutral-buoyancy video, RS-485 and auxiliary power tether rated to 400 m depth (continuous reels up to 500 m)
TF-DRONE Cleaning Drones, Dam Penstocks & 600V PoT Duty
Purpose-built for portable underwater cleaning drones, proactive ship-hull slime grooming UUVs, hydro-dam penstock inspection drones and surface-powered mini-ROVs.

- Portable underwater hull-cleaning and slime-grooming drones requiring 600 V DC 1.0–1.5 kW continuous surface power and 100 Mbps telemetry through a single Ø 7.8–9.8 mm floating tether.
- Hydroelectric dam penstocks, potable-water reservoirs, cooling-water intakes and flooded mine galleries requiring freshwater-neutral (SG 1.000) Ø 4.00 mm coax (1GAX119) or anti-kink optical (2GAX113) micro-tethers.
- Shipyard UWILD hull thickness gauging, sea-chest inspection, propeller checks and ballast-tank micro-ROVs diving repeatedly to 100–250 m (2GAX123 / TF-DRONE-8CNB).
- Aquaculture cage camera drones, scientific UUVs and USV-deployed micro-winch inspection vehicles demanding tight bend radii (10 × OD dynamic) without spool hockling.
TF-DRONE vs 2GAX160–8GAX163 vs Cat5e FTP vs TF-HULL Tethers
| Tether Series | Core Architecture | Outer Diameter & MOQ | Target Underwater Vehicle |
|---|---|---|---|
| TF-DRONE & GAX113–123 (this page) | 4mm Coax / Anti-Kink FO / 250m Pair / 600V 5-Pair | Ø 4.00–9.80 mm (200 m reel MOQ) | Portable cleaning/grooming drones, dam UUVs & 1 kW topside mini-ROVs |
| 2GAX160–8GAX163 / DLRB Series | 1–4 uniform 26 AWG twisted pairs (250–300 V) | Ø 4.00–11.0 mm (200 m / 50 m MOQ) | Battery micro-ROVs using standard 1-pair or 4-pair PLC telemetry |
| TF-NBCAT5E Shielded FTP Tether | 4×2×24 AWG Foil-Shielded Cat5e / Cat6 | Ø 7.0–9.8 mm (200 m reel MOQ) | Short-range (<100 m) direct Gigabit RJ45 Ethernet ROVs & cameras |
| TF-HULL Biofouling Cleaning Tether | 3–75 kW 3-phase / HV DC + FIMT Fiber | Ø 11.3–39.25 mm (50 m MOQ) | Heavy rotary-brush & cavitation ship-hull cleaning ROVs |
Running a 15–75 kW commercial rotary-brush or cavitation ship-hull cleaning vehicle? Step up to our TF-HULL Ship Hull Biofouling Cleaning Robot Tether page.
TF-DRONE Underwater Drone Micro-Tether RFQ Checklist
- Target model code (1GAX119 coax, 2GAX113 anti-kink fiber, 2GAX123 250 m twisted-pair, TF-DRONE-8CNB or TF-DRONE-600V5P) or custom conductor/fiber schedule.
- Topside power mode: onboard drone battery (signal-only micro-tether) or surface power supply (specify DC bus voltage, e.g., 400 V DC or 600 V DC, and continuous watts).
- Water environment & dive depth: freshwater dam/reservoir (SG 1.000) or seawater port/offshore (SG 1.026), plus maximum repeatable dive depth (e.g., 100 m, 250 m or 400 m).
- Mechanical termination constraint: compression-gland penetrator bore range (e.g., 3.7–4.5 mm or 9.5–10.0 mm) or two-part resin potting requirement (PUR vs slick LDPE jacket).
- Reel length & quantity (200 m standard reel MOQ; 200 m, 300 m, 500 m or custom continuous lengths shipped with heat-shrink end caps in 7 to 45 working days).
Related selection resources
- Subsea, Hull-Cleaning & ROV Tether Model Cross-Reference Hub
- Compare 2GAX160–8GAX163 & DLRB 26 AWG Multi-Pair Buoyant ROV Tethers
- Compare 4GAX181, 18GAX111 & 2,400 V Floating Fiber-Optic ROV Tethers
- Compare TF-POT 400–800 V DC & FM022702 Observation ROV Tethers
- Upgrade to TF-HULL 3–75 kW Ship Hull Biofouling Cleaning Robot Tethers
- Compare TF-NBCAT5E Foil-Shielded Cat5e FTP Neutrally Buoyant ROV Cable
- Engineering guide: ROV tether buoyancy, current drag & 250 m foam compression
- Engineering guide: Polyether PUR vs LDPE potting & 3.7–9.8 mm penetrator fit
TF-DRONE Underwater Drone Buoyant Tether FAQ
Why do standard foamed ROV tethers lose buoyancy below 100 m, and how does TF-DRONE 2GAX123 prevent it?
250 m repeatable hydrostatic pressure rating (25 bar) is achieved on TF-DRONE 2GAX123 using high-compressive-strength closed-cell micro-cellular polymer compound instead of soft low-density gas-blown foam, preventing cell wall rupture so the Ø 4.10 mm tether returns to exact neutral freshwater trim dive after dive.
Should I choose a polyether PUR jacket or UV-LDPE / PE jacket on TF-DRONE (1GAX119 / 2GAX113) tethers?
2 jacket chemistries serve distinct terminations: choose polyether PUR (2GAX123, TF-DRONE-600V5P, 8CNB) when you pot subsea connectors with two-part epoxy/polyurethane resin or seal inside O-ring compression penetrators; choose slick UV-LDPE or anti-kink PE (1GAX119, 2GAX113) when mechanical Kellum grips are used and ultra-low sliding friction over concrete dam walls is priority.
Can TF-DRONE-600V5P fit standard 9.8 mm compression-gland hull penetrators for 1 kW surface-powered drones?
Yes — TF-DRONE-600V5P is concentric-extruded to Ø 9.80 ± 0.25 mm with two 23 AWG 600 V DC power pairs, one 24 AWG ground pair and two 26 AWG 100-ohm data pairs, sealing cleanly inside standard 9.5–10.0 mm compression penetrators.
How does TF-DRONE 2GAX113 prevent optical fiber kinking and attenuation spikes on small hand spools?
4.00 mm torque-balanced aramid braid combined with a controlled-modulus anti-kink polyethylene jacket resists twist memory (hockling) during slack payoff, while ITU-T G.657.A2 bend-insensitive single-mode glass maintains < 0.2 dB loss even at 15 mm bend radii.
Do you supply TF-DRONE tethers with pre-installed wet-mate plugs or power supply boxes, and what is the MOQ?
200 m standard reel is our minimum order quantity, supplied strictly as continuous un-terminated bulk cable with heat-shrink water-blocking end caps (compression penetrators and subsea plugs are installed by the vehicle integrator) in 7 to 45 working days.
TF-DRONE (1GAX119, 2GAX113, 2GAX123 & 600V 5-Pair) Schedule
TF-DRONE Buoyancy Trim, Gland Tolerance & 200 m MOQ
- Ultra-low-drag Ø 4.0–9.8 mm profile: Cuts hydrodynamic cross-flow drag by up to 60% versus standard 12–16 mm ROV umbilicals so compact 5–25 kg underwater drones hold heading in port currents and penstocks
- 250 m repeatable-dive syntactic foam: High-compressive-strength closed-cell flotation core (2GAX123 / TF-DRONE-600V5P) withstands repeated 250–400 m dives without permanent foam collapse or buoyancy loss
- Coax, anti-kink fiber & 600 V DC 5-pair: Available in 75/50-ohm micro-coax (1GAX119), non-hockling G.657.A2 optical fiber (2GAX113), 26 AWG twisted pairs (2GAX123) and 600 V DC 23/24/26 AWG 5-pair topside power
- Penetrator gland & potting calibrated: Tight ±0.15 to ±0.25 mm outer-diameter concentricity fits 3.7–9.8 mm compression gland penetrators, with bondable polyether PUR or slick low-friction UV-LDPE jackets
- 200 m standard reel MOQ, splice-free: Supplied as continuous un-terminated bulk cable from 200 m standard reels (up to 3,000 m optical single lengths) with heat-shrink water-blocking end caps in 7 to 45 working days
| Parameter | Value |
|---|---|
| Rated voltage | 250 to 300 V DC on 2GAX123, 1GAX119 and 8CNB signal/coax builds; 600 V DC topside power transmission on TF-DRONE-600V5P and 600V3P; all-dielectric 0 V on 2GAX113 |
| Outer diameter and gland tolerance | 4.00 mm (1GAX119, 2GAX113), 4.10 mm (2GAX123), 4.80 mm (HYB48), 7.80 mm (600V3P), 8.20 mm (8CNB) and 9.80 mm (600V5P) held within +-0.15 to +-0.25 mm for compression penetrators |
| Buoyancy and depth stability | Freshwater neutral (0 kg/km at SG 1.000) and seawater slightly buoyant (-1 to -4 kg/km at SG 1.026); crush-resistant closed-cell foam rated for repeated 250 m to 400 m dives |
| Tensile member and jacket options | Torque-balanced LCP or aramid yarn braid (500 N to 4,000 N breaking load); potting-ready polyether PUR (Yellow, Fluorescent Orange, Black), anti-kink PE or slick UV-LDPE |
| Supply form and MOQ | 200 m standard reel MOQ (available in 200 m, 300 m, 500 m and up to 3,000 m continuous un-terminated bulk lengths with heat-shrink end caps) in 7 to 45 working days |
| Operating temperature and bend radius | -30 °C to +80 °C dynamic underwater and deck reel service; minimum static bend radius 6 × OD, dynamic micro-spool bend radius 10 to 12 × OD |
| Potting and penetrator compatibility | Polyether PUR sheaths bond cleanly with two-part polyurethane/epoxy potting compounds and seal directly in 3.7 to 9.8 mm O-ring compression penetrators |
1GAX119, 2GAX113, 2GAX123 & 8-Core Ultra-Slim Drone Micro-Tether Schedule
| Model Code | Core / Media Construction | Strength Braid & MBL | Nom. OD & Tol. (mm) | Fresh / Seawater Wt (kg/km) | Jacket & Penetrator / Dive Rating | Next step |
|---|---|---|---|---|---|---|
| TF-DRONE 1GAX119 (Micro-Coax) | 75 Ω (or 50 Ω) Foamed Polyolefin Coax + Al/PET + TC Braid | LCP Yarn Braid (600 N) | 4.00 ± 0.15 | 0 / -1.5 (Fresh Neutral) | Foamed TPR + Slick UV-LDPE; 3.7–4.5 mm Gland | Request this size |
| TF-DRONE 2GAX113 (Anti-Kink FO) | 1–2 × 9/125 µm Bend-Insensitive SM Fiber (G.657.A2) | Aramid Yarn Braid (900 N) | 4.00 ± 0.15 | 0 / -1.0 (Neutral) | Anti-Kink PE Jacket; Non-Hockling up to 3,000 m | Request this size |
| TF-DRONE 2GAX123 (250m Pair) | 1–2 × (2×26 AWG) Tinned Cu + HDPE + Water-Block Filler | LCP Yarn Braid (500 N) | 4.10 ± 0.15 | 0 / -2.0 (250m Stable) | Crush-Resistant Foam + PUR; ≥250 m Repeated Dives | Request this size |
| TF-DRONE-HYB48 | 2 × 22 AWG DC Aux + 1 × SM G.657.A2 Optical Fiber | Aramid Braid (1,800 N) | 4.80 ± 0.20 | -1 / -3.0 (Buoyant) | Neon Yellow Bondable PUR; 4.5–5.5 mm Gland | Request this size |
| TF-DRONE-8CNB | 8 Cores: Video Pair + RS-485 Pair + 2×18 AWG + 2C Aux | Aramid Braid (3,200 N) | 8.20 ± 0.25 | 0 / -3.5 (Neutral) | Orange PUR; 400 m Depth, 8-Pin Pinout Ready (≤500 m) | Request this size |
600 V DC Surface-Powered Cleaning & Inspection Drone Hybrid Tether Schedule
| Model Code | Power & Telemetry Pair Layout | Rated Voltage & Power | Nom. OD & Tol. (mm) | Fresh / Seawater Wt (kg/km) | Flotation, Jacket & Gland Fit | Next step |
|---|---|---|---|---|---|---|
| TF-DRONE-600V3P | 1×20 AWG Power Pair + 2×26 AWG (100 Ω VDSL/PLC Pairs) | 600 V DC (0.8–1.2 kW) | 7.80 ± 0.20 | 0 / -3.0 | Foamed PUR + Yellow PUR; Fits 7.5–8.2 mm Gland | Request this size |
| TF-DRONE-400V-EO | 2×20 AWG Power Cores + 2 × SM G.657.A2 Optical Fibers | 400–600 V DC (1.5 kW) | 9.20 ± 0.25 | +1 / -2.0 | 250m Syntactic Foam + Orange PUR; 9.0–9.8 mm Gland | Request this size |
| TF-DRONE-600V5P | 2×23 AWG Power Pairs + 1×24 AWG GND Pair + 2×26 AWG Data Pairs | 600 V DC (1.0–1.5 kW) | 9.80 ± 0.25 | 0 / -4.0 | Foamed PUR + Bondable PUR + Aramid; Fits 9.5–10 mm Gland | Request this size |
Why asymmetric 5-pair (TF-DRONE-600V5P) outperforms standard Cat5e for topside-powered cleaning drones: paralleling two 23 AWG pairs for 600 V DC propulsion plus a dedicated 24 AWG ground-reference pair triples copper cross-section over 26 AWG cords while keeping two isolated 26 AWG 100-ohm twisted pairs for interference-free VDSL/Ethernet telemetry inside a single Ø 9.80 mm compression-gland envelope.
ASCII part references for BOM and ERP entry: TF-DRONE-1GAX119, TF-DRONE-2GAX113, TF-DRONE-2GAX123, TF-DRONE-HYB48, TF-DRONE-8CNB, TF-DRONE-600V3P, TF-DRONE-400V-EO, TF-DRONE-600V5P.
TF-DRONE Coaxial, Bend-Insensitive Optical & Copper Standards
| Standard or specification | Application |
|---|---|
| ASTM B33 / IEC 60228 Stranded Tinned Copper & 100-Ohm Pair Balance | Fine-stranded corrosion-resistant tinned copper conductors with controlled-capacitance HDPE/polyolefin insulation for VDSL/PLC telemetry up to 500 m. |
| IEC 61196 Micro-Coaxial & ITU-T G.657.A2 Bend-Insensitive Optical Standards | Low-loss foamed-dielectric 75/50-ohm coaxial core (1GAX119) and macro-bend-insensitive G.657.A2 single-mode fibers (2GAX113) for compact 40–80 mm drone spools. |
Certifications and document support
TEBAOFLEX ISO 9001 quality system, OTDR optical trace and HV spark testing
ITU-T G.657.A2 Bend-Insensitive Single-Mode Optical Fiber Standard
IEC 61196 — Coaxial communication cables for RF and video transmission
Related cable options
Compare these cable options by service combination, movement, load, voltage and transmission requirement.
DLRB-3TP6C & GAX250 Series (2GAX160–8GAX163) Neutrally Buoyant Multi-Pair & Power ROV Tether Cable (250–300 V)
A related cable option for a different application or duty profile.
View product4GAX181 & Floating Electro-Optical Buoyant Fiber-Optic ROV Tether Cable (Ø 3.0–15.6 mm, All-Dielectric & up to 2,400 V)
A related cable option for a different application or duty profile.
View productTF-NBCAT5E Neutrally Buoyant ROV Tether Cable — Cat5e FTP, Cat6 S/FTP & PoE+ Power-Data Underwater Ethernet Series (Ø 7.0–11.8 mm)
A related cable option for a different application or duty profile.
View productRequest a cable recommendation and quotation
Send the required services, cable length, mechanical duty, environment, termination and quantity. Our team will review the application before quoting.
- Include the product name or SKU plus the required cable length and quantity.
- Attach a specification, drawing or data sheet when available.




