


TF-POT Inspection ROV Power-over-Tether (400–800 V DC) & Aramid Multi-Element Tether Cable (FM022702 Series)
TF-POT (TF-POT-FM27) combines slim low-drag 400–800 V DC Power-over-Tether (PoT) inspection ROV cables (Ø 4.2 mm to 17.0 mm) with aramid-reinforced multi-element coax/twisted-pair/fiber ROV tethers cross-referencing FM022702-1 through FM022702-26 (Ø 8.26 mm to 49.53 mm). Engineered for UWILD class hull inspections, port security, potable water tanks and high-current coastal ROV operations.
TF-POT inspection ROV tether cables span two mission-critical portable subsea families: slim Ø 4.2 mm to 17.0 mm expeditionary and 400–800 V DC Power-over-Tether (PoT / PPT) cables for high-thrust observation ROVs, and aramid-reinforced multi-element tethers matching FM022702-1 through FM022702-26 (Ø 8.26 mm to 49.53 mm, 200 lb / 0.9 kN to 35,000 lb / 155.7 kN breaking load).
During Underwater Inspection in Lieu of Dry-Docking (UWILD), ship hull propeller/rudder surveys, offshore platform leg inspections and municipal tunnel penetrations, tether drag—not thruster horsepower—limits where an observation ROV can hold station. Stepping topside DC bus power up to 400–800 V DC lets TF-POT deliver 2–5 kW over 16–20 AWG tinned copper inside a sleek Ø 7.62 mm negative-buoyancy or Ø 9.5 mm neutral-buoyancy tether instead of a bulky 18 mm low-voltage cable. Where legacy analog video, multi-sonar RS-485 quads and fiber channels are required, our FM022702 series combines low-dielectric copolymer insulation, 75-ohm coax, shielded pairs/quads (TSP/TSQJ) and aramid strength layers.
Specify slim <=10.0 mm TF-POT models in standard 200 m bulk reels (or 300 m / 450 m / 600 m continuous mission lengths) and >10.0 mm hybrid/FM022702 configurations from 50 m MOQ. Every drum ships as continuous bulk cable with heat-shrink water-blocking end caps in 7 to 45 working days.
Explore the marine, offshore and shipboard cable range for related configurations.
TF-POT Power-over-Tether & FM022702 ROV Cable Construction
Constructed with fine-stranded tinned copper, low-dielectric copolymer insulation, high-modulus aramid fiber strength members and neutral/negative buoyancy PUR, TPE or PE jackets.

| Component | Material and construction |
|---|---|
| 1. High-Voltage DC Power & Telemetry Conductors (10–28 AWG Tinned Copper) | Corrosion-resistant stranded tinned copper power pairs (rated 400–1,000 V DC for PoT topside power supplies) insulated with thin, moisture-impervious low-dielectric polyolefin copolymer. |
| 2. Ethernet, 75-Ohm Coax, Shielded Pairs/Quads (TSP/TSQJ) or Optical Fibers | 60–100 Mbps VDSL/PLC twisted pairs, Cat5e/Cat6 data cores, 75-ohm video coax, individually jacketed shielded pairs/quads (TSPJ/TSQJ), or tight-buffered / tube SM & MM fibers. |
| 3. Longitudinal Moisture Barrier & Flotation Core | Water-blocking gel/tape barriers combined with calibrated cellular foam or high-density core fillers to achieve exact neutral (-2 to 0 kg/km) or current-cutting negative buoyancy. |
| 4. Lightweight High-Modulus Aramid Fiber Strength Braid | Served or braided aramid yarn engineered for 170 kg (375 lb) on 4.2 mm micro tethers up to 635–730 kg (1,400–1,600 lb) on PoT tethers and up to 35,000 lb (155.7 kN) on heavy FM022702 builds. |
| 5. Turbid-Water High-Visibility PUR, TPE or Copolymer Jacket | Bondable, abrasion-resistant polyether PUR, TPE or foamed PE outer jacket in Fluorescent Orange, Neon Yellow or Black (20 × OD standard minimum operational bend radius). |
TF-POT Drag Profiles & FM022702 Dash-Number Breakdown
- TF-POT EXP / FO: Ultra-slim Ø 4.2 mm copper (60 Mbps) and Ø 4.5 mm optical (1 Gbps) neutral tethers for battery-powered ROVs (200 m reel MOQ)
- TF-POT NEG-7.6 / PPT-9.5: 400–800 V DC Power-over-Tether cables in Ø 7.62 mm current-cutting negative or Ø 9.5 mm neutral buoyancy (200 m reel MOQ)
- TF-POT NEU-11.7 / HYB-14.5: Ø 11.7 mm neutral copper and Ø 12–17 mm fiber-copper topside-powered ROV tethers (50 m MOQ)
- TF-POT FM022702-<1..26>: Aramid-reinforced tinned-copper, low-dielectric copolymer, 75-ohm coax, TSP/TSQJ and SM/MM fiber multi-element ROV tethers
- -FO / -NY / -BK: Bondable outer jacket color options: Fluorescent Orange (-FO), Neon Yellow (-NY) or Matte Black (-BK)
TF-POT Ship UWILD Surveys, Tidal Ports & Tunnel ROV Duty
Engineered for portable ship-inspection ROVs, coastal high-current surveys, municipal water tunnels, dams and multi-sensor observation vehicles.

- Classification society UWILD ship hull, sea-chest, rudder pintle, sacrificial anode and propeller blade ROV inspections at anchorage.
- High-current harbor security, bridge pier scour surveys and unexploded ordnance (UXO) search ROVs using low-drag Ø 7.62 mm negative or Ø 9.5 mm PoT tethers.
- Long-penetration battery-ROV inspections of potable water aqueducts, hydroelectric headrace tunnels and submerged pipelines (up to 600 m copper / 2,000 m fiber).
- Direct cable replacement and custom length builds for observation and light work-class ROV fleets specifying FM022702-1 through FM022702-26 pinouts.
TF-POT Power-over-Tether vs 26 AWG Data & Fiber ROV Tethers
| Tether Family | Topside Power Capability | Typical Diameter & MOQ | Ideal Inspection / ROV Scenario |
|---|---|---|---|
| TF-POT & FM022702 (this page) | 400–800 V DC PoT (2–5 kW) or Multi-AWG | Ø 4.2–10 mm (200 m MOQ); >10 mm (50 m MOQ) | UWILD ship hull surveys, tidal currents & multi-sensor ROVs |
| 2GAX–8GAX / Slim 26 AWG Tether | Signal/PLC only (250–300 V, 26 AWG pairs) | Ø 4.0–7.6 mm (200 m reel MOQ) | Battery-powered micro ROVs (1–4 twisted pairs only) |
| 4GAX181 Buoyant Fiber Tether | Optical only (or 2,400 V specialized EO) | Ø 5.0–12.0 mm (50 m / 200 m MOQ) | Ultra-long 1–5 km unpowered optical ROV excursions |
| TF-HULL Biofouling Tether | 3–75 kW three-phase / HV DC heavy power | Ø 11.3–39.25 mm (50 m MOQ) | Active rotary brush & cavitation hull-cleaning robots |
Only need 1 to 4 unshielded 26 AWG twisted pairs (Ø 4.0–7.6 mm, 250–300 V DC) for a battery micro-ROV? See our dedicated DLRB & 2GAX–8GAX Neutrally Buoyant ROV Tether page.
TF-POT & FM022702 Inspection ROV Tether RFQ Checklist
- ROV power architecture: onboard battery only (EXP-4.2 / FO-4.5) or topside Power-over-Tether supply (state DC voltage, e.g., 400 V DC, 650 V DC or 800 V DC, and peak watts).
- Target FM022702 dash number (-1 through -26) or exact conductor/coax/TSP/fiber core list and maximum outer diameter.
- Buoyancy preference: neutral flotation for calm tanks/berths or negative sinking profile (NEG-7.6) to slice through 2–3 knot tidal currents.
- Outer sheath color: turbid-water Fluorescent Orange, Neon Yellow, or Matte Black PUR / TPE / PE.
- Continuous reel length(s) (200 m standard reel MOQ for <=10.0 mm slim tethers; 50 m MOQ for >10.0 mm tethers; bulk cable with heat-shrink end caps in 7 to 45 working days).
Related selection resources
- Explore TEBAOFLEX Observation ROV, UWILD & Marine Tether Solutions
- Compare 2GAX160–8GAX163 & DLRB 26 AWG Neutrally Buoyant ROV Tethers
- Compare 4GAX181 & 2,400 V Floating Fiber Optic ROV Tether Cables
- Compare Cat5e FTP Neutrally Buoyant Observation ROV Tether Cable
- Upgrade to TF-HULL 3–75 kW Hull Biofouling Cleaning Robot Tethers
- Engineering guide: Choosing ROV tether buoyancy, drag & voltage
TF-POT Inspection ROV Power-over-Tether & FM022702 FAQ
Why choose a negative-buoyancy TF-POT NEG-7.6 tether instead of a neutral tether in strong harbor currents?
7.62 mm solid negative-buoyancy construction eliminates the thick foam flotation layer required on the 11.7 mm neutral copper tether, reducing cross-sectional current drag by 35% so port inspection ROVs can hold station in 2–3 knot tidal flows.
How does 400–800 V DC Power-over-Tether (TF-POT PPT-9.5) extend inspection ROV endurance?
400–800 V DC topside transmission cuts conductor current 8× to 16× compared with 48 V DC, enabling multi-kilowatt continuous thruster and LED power through a neutral Ø 9.5 mm tether up to 450 m without battery swaps.
Can TEBAOFLEX manufacture cross-reference replacements for FM022702-1 through FM022702-26 aramid ROV tethers?
Yes — we build all 26 aramid-reinforced tinned-copper, 75-ohm coax, shielded twisted-pair/quad (TSP/TSQJ), Cat5e and single-mode/multimode fiber combinations with bondable PUR, TPE or foamed PE jackets.
What high-visibility options do you offer on TF-POT tethers for murky port and nuclear/industrial basin inspections?
Yes — 2 high-visibility jacket colors (Neon Yellow and Fluorescent Orange UV- and hydrolysis-stabilized PUR) provide reliable surface and underwater visual tracking without fragile phosphor electroluminescent wires or external high-voltage inverters.
What is the minimum order quantity and delivery form for TF-POT inspection ROV tethers?
200 m standard reel MOQ applies to slim <=10.0 mm tethers (EXP-4.2, FO-4.5, NEG-7.6, PPT-9.5, FM022702-21) and 50 m MOQ applies to >10.0 mm tethers, shipped as continuous bulk cable with heat-shrink end caps in 7 to 45 working days.
TF-POT (4.2–17 mm) & FM022702 Multi-Element Tether Schedule
TF-POT 400–800 V DC Bus, Aramid Strength & 200 m / 50 m MOQ
- Low-drag 400–800 V DC PoT builds: Slim Ø 7.62 mm (negative) and Ø 9.5 mm (neutral) topside-powered copper tethers cut hydrodynamic cross-section drag by 40% in 2–3 knot harbor tidal currents
- Battery-ROV Ø 4.2–4.5 mm micro tethers: Ultra-slim Ø 4.2 mm copper (60 Mbps, 600 m) and Ø 4.5 mm optical (1 Gbps, 2,000 m) expeditionary tethers for battery-powered hull and tunnel ROVs
- Full FM022702-1 to -26 coverage: Aramid-reinforced tinned-copper, low-dielectric copolymer, 75-ohm coax, shielded TSP/TSQJ, Cat5e and SM/MM fiber tethers from 90 kg to 155 kN breaking strength
- High-visibility turbid-water jackets: Available in Neon Yellow and Fluorescent Orange hydrolysis-resistant PUR, TPE or foamed flotation PE for murky port piers without fragile EL wires
- 200 m slim reel / 50 m heavy MOQ: Continuous bulk cable with heat-shrink end caps: 200 m standard reel MOQ for slim <=10.0 mm tethers and 50 m MOQ for >10.0 mm multi-element tethers (7 to 45 working days)
| Parameter | Value |
|---|---|
| Rated voltage | 300 V to 1000 V DC (optimized for 400 to 800 V DC Power-over-Tether topside supplies); 250 V to 300 V signal and coax cores |
| Diameter and drag profile | 4.2 to 9.5 mm ultra-slim low-drag inspection tethers; 10.67 to 49.53 mm across multi-element hybrid and FM022702 series |
| Breaking strength range | 170 kg to 730 kg (375 to 1600 lb) on portable inspection PoT tethers; 200 lb (0.9 kN) to 35000 lb (155.7 kN) on FM022702 builds |
| High-visibility jacket options | Fluorescent Orange, Neon Yellow or Matte Black hydrolysis-resistant PUR, TPE and foamed PE jackets for turbid port water |
| Minimum order and lead time | 200 m standard reel MOQ for slim tethers up to 10.0 mm OD; 50 m MOQ for tethers above 10.0 mm OD; delivered in 7 to 45 working days |
| Delivery configuration | Continuous cut-to-length bulk cable on wooden or marine reels with heat-shrink water-blocking end caps (wet-mate plugs potted by client) |
| Recommended bend radius | 10 x OD static and 20 x OD dynamic under tension across portable hand reels, slip-ring winches and over-the-side roller fairleads |
TF-POT (4.2–17.0 mm) Portable Inspection & Power-over-Tether Schedule
| Model & Tether Type | Power Delivery Mode | Nom. OD (mm / in) | Seawater Buoyancy Profile | Breaking Strength (kg / lb) | Max Mission Length & Data | Bulk Reel MOQ | Next step |
|---|---|---|---|---|---|---|---|
| TF-POT EXP-4.2 (Copper) | Subsea ROV Battery Only | 4.2 / 0.17" | Neutral (-2 to -3 kg/km) | 170 kg / 375 lb | 600 m (60 Mbps PLC/VDSL) | 200 m reel | Request this size |
| TF-POT FO-4.5 (Fiber) | Subsea ROV Battery Only | 4.5 / 0.18" | Neutral (-2 to -3 kg/km) | 300 kg / 660 lb | 2,000 m (1 Gbps Optical) | 200 m reel | Request this size |
| TF-POT NEG-7.6 (Negative PoT) | Topside 400–800 V DC Supply | 7.62 / 0.30" | Negative (High-Current Sinking) | 457 kg / 1,007 lb | 400 m (60 Mbps up to 300 m) | 200 m reel | Request this size |
| TF-POT PPT-9.5 (Performance PoT) | Topside 400–800 V DC Supply | 9.5 / 0.37" | Neutral (Foamed Flotation) | 635 kg / 1,400 lb | 450 m (60 Mbps up to 300 m) | 200 m reel | Request this size |
| TF-POT NEU-11.7 (Neutral Cu) | Topside DC / AC Power Supply | 11.7 / 0.46" | Neutral (0 kg/km Seawater) | 457 kg / 1,007 lb | 400 m (60 Mbps up to 300 m) | 50 m | Request this size |
| TF-POT HYB-14.5 (Fiber-Copper) | Topside HV DC Power Supply | 14.5 (12–17) / 0.57" | Slightly Negative (-8 to -10 kg/km) | 730 kg / 1,600 lb | 600 m (1 Gbps SM/MM Fiber) | 50 m | Request this size |
| TF-POT 24XM470 (600m Survey) | Topside Power + Twisted-Pair Telemetry | 25.0 / 0.98" | Water-Blocked Observation Trim | LCP Braid Light-Intervention | 600 m Operating Depth (Single Length) | 50 m | Request this size |
TF-POT (FM022702-1 to -26) Aramid Multi-Element ROV Tether Schedule
| Model & FM022702 Code | Optical / Coax / Ethernet Core | Shielded Pairs/Quads & Power Cores | Nom. OD (mm / in) | Seawater Wt (lb/kft) | Break Strength (lb / kN) | Bulk Reel MOQ | Next step |
|---|---|---|---|---|---|---|---|
| TF-POT FM022702-21 | 1 MM Fiber | 2c × 22 AWG | 8.26 / 0.325" | 0 (Neutral) | 700 lb / 3.1 kN | 200 m reel | Request this size |
| TF-POT FM022702-8 | 1 TP 24 AWG + 2 TP 28 AWG | 4c × 20 AWG | 10.67 / 0.420" | 0 (Neutral) | 200 lb / 0.9 kN | 50 m | Request this size |
| TF-POT FM022702-7 | 1 TSP 26 AWG | 4c × 22 AWG + 2c × 18 AWG | 10.80 / 0.425" | -1.5 (Buoyant) | 500 lb / 2.2 kN | 50 m | Request this size |
| TF-POT FM022702-13 | 1 × 75 Ω Coax | 1 TSQJ 24 AWG + 2c × 16 AWG | 13.20 / 0.520" | 0 (Neutral) | 2,100 lb / 9.3 kN | 50 m | Request this size |
| TF-POT FM022702-15 | 1 × Cat5e Subsea Data Unit | 12c × 22 AWG | 13.97 / 0.550" | 0 (Neutral) | 1,100 lb / 4.9 kN | 50 m | Request this size |
| TF-POT FM022702-6 | 2 SM Fibers | 2 TSP 26 AWG + 3c × 16 AWG | 15.24 / 0.600" | 0 (Neutral) | 1,000 lb / 4.4 kN | 50 m | Request this size |
| TF-POT FM022702-14 | 4 MM Fibers | 2 TSP 24 AWG + 2c × 14 AWG | 15.24 / 0.600" | 0 (Neutral) | 2,000 lb / 8.9 kN | 50 m | Request this size |
| TF-POT FM022702-12 | 2 × 75 Ω Coax | 2 TSPJ 26 AWG + 4c × 18 AWG | 16.76 / 0.660" | 0 (Neutral) | 2,000 lb / 8.9 kN | 50 m | Request this size |
| TF-POT FM022702-2 | 6 MM Fibers | 2 TSPJ 24 AWG + 4c × 18 AWG | 17.78 / 0.700" | 19 | 2,000 lb / 8.9 kN | 50 m | Request this size |
| TF-POT FM022702-22 | 3 SM Fibers | 4c × 20 AWG | 23.24 / 0.915" | -7 (Buoyant) | 25,000 lb / 111.2 kN | 50 m | Request this size |
| TF-POT FM022702-26 | 4 SM Fibers | 5c × 12 AWG | 23.62 / 0.930" | 110 | 30,000 lb / 133.4 kN | 50 m | Request this size |
| TF-POT FM022702-1 | 6 MM Fibers + 3 × 75 Ω Coax | 3 TSQJ 24 AWG + 15c × 18 AWG | 45.21 / 1.780" | 27 | 14,000 lb / 62.3 kN | 50 m | Request this size |
| TF-POT FM022702-23 | 3 SM Fibers | 3c × 10 AWG | 49.53 / 1.950" | -32 (Buoyant) | 35,000 lb / 155.7 kN | 50 m | Request this size |
Additional FM022702 dash numbers supported on request: FM022702-3 (21.34 mm, 1TQ26+3TSPJ24+11c24+9c21), FM022702-5 (22.86 mm, 4MM+5TSP22+7c16), FM022702-11 (20.96 mm), FM022702-16 (16.51 mm), FM022702-17 (26.04 mm, 18,000 lb), FM022702-18 (20.07 mm), FM022702-19 (13.97 mm), FM022702-20 (17.78 mm, 4,400 lb), FM022702-24 (25.15 mm) and FM022702-25 (27.94 mm).
ASCII part references for BOM and ERP entry: TF-POT-EXP-4P2, TF-POT-FO-4P5, TF-POT-NEG-7P6, TF-POT-PPT-9P5, TF-POT-NEU-11P7, TF-POT-HYB-14P5, TF-POT-FM022702-1, TF-POT-FM022702-6, TF-POT-FM022702-12, TF-POT-FM022702-13, TF-POT-FM022702-14, TF-POT-FM022702-15, TF-POT-FM022702-21, TF-POT-FM022702-22, TF-POT-FM022702-23, TF-POT-FM022702-26, TF-POT-24XM470.
TF-POT Conductor, Coaxial & Optical Fiber Standards
| Standard or specification | Application |
|---|---|
| ASTM B33 / IEC 60228 Stranded Tinned Copper & Low-Dielectric Insulation | Corrosion-resistant tinned copper conductors with moisture-blocking copolymer insulation for 400–1,000 V DC PoT transmission. |
| IEC 61196 75-Ohm Coax & ITU-T G.657.A2 Optical Fiber Standards | Controlled-impedance video coax, foil-shielded TSP/TSQJ pairs/quads and bend-insensitive fibers for 20 × OD portable reels. |
Certifications and document support
TEBAOFLEX ISO 9001 quality management and dielectric/OTDR factory testing
ITU-T G.652 / G.657 Single-Mode Optical Fiber Transmission Standards
IEC 61196 — Coaxial communication cables for video and RF telemetry
Related cable options
Compare these cable options by service combination, movement, load, voltage and transmission requirement.
TF-DRONE Underwater Cleaning & Inspection Drone Buoyant Micro-Tether Cable (1GAX119 Coax, 2GAX113 Anti-Kink Fiber, 2GAX123 & 600V PoT)
A related cable option for a different application or duty profile.
View productDLRB-3TP6C & GAX250 Series (2GAX160–8GAX163) Neutrally Buoyant Multi-Pair & Power ROV Tether Cable (250–300 V)
A related cable option for a different application or duty profile.
View product4GAX181 & Floating Electro-Optical Buoyant Fiber-Optic ROV Tether Cable (Ø 3.0–15.6 mm, All-Dielectric & up to 2,400 V)
A related cable option for a different application or duty profile.
View productRequest a cable recommendation and quotation
Send the required services, cable length, mechanical duty, environment, termination and quantity. Our team will review the application before quoting.
- Include the product name or SKU plus the required cable length and quantity.
- Attach a specification, drawing or data sheet when available.




