


TF-AQUACLEAN Offshore Aquaculture Net-Cleaning Robot Buoyant Hybrid Umbilical Cable (690 V / 1,000 V, 15–75 kW)
TF-AQUACLEAN (TF-AQUACLEAN-UMB) is a high-power, surface-floating electro-optical hybrid umbilical cable engineered for 15 kW to 75 kW offshore salmon and marine finfish cage net-cleaning robots and thruster-driven net washers. Rated 0.6/1 kV (690 V / 1,000 V AC and 1,000 V DC) with Class 5/6 tinned copper, subsea Cat 6 or stainless-tube optical fibers, aramid tensile braid and fish-oil/copper-antifouling resistant yellow buoyant PUR sheathing.
TF-AQUACLEAN offshore aquaculture net-cleaning robot umbilical cables deliver 15 kW to 75 kW of 690 V / 1,000 V AC (or 1,000 V DC) pump/thruster power alongside gigabit subsea Cat 6 Ethernet, RS-485 telemetry and G.657.A2 optical fibers inside a rugged Ø 17.5 mm to Ø 39.8 mm floating yellow polyurethane construction with 18 kN to 55 kN breaking strength.
Modern open-ocean and fjord salmon/yellowtail farms wash 160–200 m circumference net pens weekly using automated multi-disc rotating net-cleaning rigs and crawling/flying ROVs. Unlike static cage camera cables, a net-cleaner umbilical is hauled in and out multiple times per shift over service-vessel rollers, dragged across rough HDPE collar pipes, exposed to salmon feed oils, copper antifouling residue and sub-zero deck frost, and flexed constantly in 1–2.5 knot currents. TF-AQUACLEAN pairs fine-stranded tinned copper conductors, VFD-friendly symmetrical earth cores (3+3G on large sizes), dry longitudinal water-blocking, closed-cell flotation and tear-resistant yellow polyether PUR.
Choose from six 15–75 kW heavy net-washer power-hybrid tiers or three compact net-inspection / mort-recovery crawler tethers. Delivered as continuous bulk cable with heat-shrink water-blocking end caps from 50 m MOQ in 7 to 45 working days.
Explore the marine, offshore and shipboard cable range for related configurations.
TF-AQUACLEAN Aquaculture Net-Cleaning Umbilical Construction
Engineered for daily aquaculture workboat deployment with VFD-ready tinned-copper power cores, water-blocked fiber/Ethernet units, non-rotating aramid tensile braid and lipid-resistant floating PUR.

| Component | Material and construction |
|---|---|
| 1. 0.6/1 kV (690 V / 1,000 V) Tinned Copper Power Conductors | IEC 60228 Class 5/6 corrosion-resistant tinned copper power cores (2.5 mm² to 35 mm², including symmetrical 3×25+3G4 and 3×35+3G6 VFD motor builds) insulated with 90 °C XLPE or HEPR. |
| 2. Subsea Cat 6 Ethernet,FIMT Fiber & Sensor Pairs | 100-ohm foil/braid-shielded subsea Cat 6 (4×2×24 AWG) for HD net-mesh inspection cameras, 4 SM/MM stainless-steel FIMT optical tube, and 2×2×0.50 mm² RS-485/CAN control pairs. |
| 3. Longitudinal Water-Blocking & Torsion-Relief Lay-Up | Short-lay concentric stranding around a compliant central core with dry super-absorbent swelling tapes and elastomeric water-blocking compound preventing seawater wicking after accidental fish-bite or prop nick. |
| 4. Closed-Cell Surface Flotation & Torque-Balanced Aramid Braid | Resilient cellular polyolefin flotation sheath engineered for repeated capstan compression plus contra-helical aramid yarn braid (18 kN to 55 kN MBL). |
| 5. Lipid-, Peroxide- & Abrasion-Resistant High-Visibility Yellow PUR Sheath | Cold-flexible (-35 °C to +80 °C) Shore 94A polyether polyurethane jacket formulated against fish-feed oils, H2O2 delousing treatments, copper net coatings and HDPE collar friction. |
TF-AQUACLEAN 15–75 kW & Symmetrical VFD Code Breakdown
- TF-AQUACLEAN 15K..75K: High-power 0.6/1 kV (690 V / 1,000 V) buoyant net-washer umbilicals sized for 15 kW to 75 kW rotating pump/thruster rigs
- 3X25+3G4 / 3X35+3G6: Symmetrical 3-earth VFD motor geometry suppressing high-frequency inverter common-mode interference on camera Ethernet
- DC1000-4G10: 1,000 V DC bus power-hybrid umbilical for next-generation electric thruster and onboard-inverter net-cleaning vehicles
- ROV-4G2.5 / 4G4: Compact floating electro-optical tethers for autonomous net-grooming crawlers and cage-bottom mort-collection ROVs
- +PA Suffix: Integrated chemical-resistant polyamide air/dosing or depth-reference micro-tube inside the floating core bundle
TF-AQUACLEAN Salmon Net Washers, Groomers & Mort ROV Duty
Designed for rotating multi-disc net-cleaning rigs, autonomous cage-crawling cleaners, mort-collection ROVs and exposed offshore fish-farm service vessels.

- High-power (15–75 kW, 690 V / 1,000 V) multi-disc rotating net-cleaning rigs and onboard-pump cavitation net washers on salmon and marine finfish cages.
- Autonomous and remotely operated net-crawling grooming robots performing continuous low-impact biofouling prevention.
- Cage-bottom mortality (mort) recovery crawlers, net-hole repair ROVs and mooring-grid inspection vehicles.
- Dynamic deck-to-cage floating power/data umbilicals between aquaculture service catamarans (wellboats) and submerged offshore pens.
TF-AQUACLEAN Dynamic Washer Cable vs Static Cage Sensor Cable
| Cable Series | Deployment Mode | Voltage & Power Envelope | Primary Aquaculture / Marine Use |
|---|---|---|---|
| TF-AQUACLEAN (this page) | Daily dynamic reeling & floating payout | 690 V / 1,000 V AC & DC (15–75 kW) | Rotating multi-disc cage net-cleaning robots & mort ROVs |
| Static Cage Observation Cable | Fixed seabed / mooring-grid installation | 250–600 V low-power sensor & feeder | Permanent cage cameras, DO probes & feed-barge links |
| TF-HULL Biofouling Tether | Dynamic harbor hull grooming / IWHC | 400–1,000 V (3–75 kW; bunker-oil PUR) | Commercial ship hull barnacle & slime cleaning ROVs |
Need permanent seabed power-optical links or fixed dissolved-oxygen / cage camera cables instead of a dynamic net-washing robot umbilical? Visit our Seabed Observation & Aquaculture Composite Cable page.
TF-AQUACLEAN Net-Cleaning Robot Umbilical RFQ Checklist
- Net-cleaning robot motor power (kW), operating voltage (400 V, 480 V, 690 V or 1,000 V AC, or HV DC) and VFD carrier frequency.
- Umbilical continuous length per drum (typically 150 m, 200 m, 250 m or 300 m) and minimum workboat reel/sheave diameter.
- Camera and control channels: subsea Cat 6 Ethernet, single-mode/multimode FIMT fibers, RS-485/CAN pairs, or air/pressure tubing.
- Site water salinity (brackish fjord SG 1.010 vs open-ocean SG 1.026) and minimum winter deck temperature.
- Required reel quantity (supplied as continuous bulk cable with heat-shrink water-blocking end caps; MOQ 50 m in 7 to 45 working days).
Related selection resources
- Explore TEBAOFLEX Offshore Aquaculture, ROV & Subsea Umbilicals
- Compare Fixed Seabed Observation & Aquaculture Cage Sensor Cables
- Compare TF-HULL Ship Hull Biofouling Cleaning Robot Buoyant Tethers
- Compare Floating Feed-Barge & Pontoon Power-Optical Umbilical Cables
- Engineering guide: Workboat reel drum & crane sheave diameter sizing
- Engineering guide: Why tinned copper resists seawater sulfide corrosion
TF-AQUACLEAN Offshore Aquaculture Net-Cleaning Umbilical FAQ
Why do offshore aquaculture net-cleaning robots specify 690 V or 1,000 V AC on TF-AQUACLEAN umbilicals?
690 V and 1,000 V three-phase transmission cuts motor current by 42% to 60% versus 400 V across 180–250 m workboat-to-cage runs, shrinking copper cross-section so the umbilical stays light enough to float and spool over compact deck cranes.
How does TF-AQUACLEAN prevent umbilical entanglement with fish-cage moorings and workboat propellers?
-15 to -45 kg/km calibrated closed-cell flotation plus a high-visibility yellow PUR jacket keeps slack floating cleanly on the water surface inside or alongside the HDPE cage collar rather than sinking into mooring bridles or sinker rings.
Does salmon feed oil, hydrogen peroxide or sub-zero Nordic weather crack the TF-AQUACLEAN outer sheath?
No — the crosslinked polyether-grade Shore 94A polyurethane sheath is formulated against marine lipids/fish oil, H2O2 delousing baths and copper net coatings while remaining cold-flexible down to -35 °C.
Why use symmetrical 3+3G earth cores on 55 kW and 75 kW TF-AQUACLEAN VFD motor umbilicals?
3 symmetrical interstitial ground conductors (3×25+3G4 and 3×35+3G6) balance phase capacitance and return high-frequency VFD common-mode currents evenly, preventing induced noise on adjacent Cat 6 camera pairs and motor shaft bearing pitting.
How is TF-AQUACLEAN supplied and what are the minimum order quantity and lead time?
50 m minimum order quantity (commonly ordered in 150–300 m continuous cage lengths), delivered as bulk cable on wooden drums with heat-shrink water-blocking end caps in 7 to 45 working days.
TF-AQUACLEAN (690 V / 1,000 V, 15–75 kW) Umbilical Schedule
TF-AQUACLEAN Surface Flotation, Lipid-Resistant PUR & 50 m MOQ
- 690 V / 1,000 V for 15–75 kW washers: Sized from 4G6 mm² up to 3×35+3G6 mm² to power multi-disc rotating cavitation/high-pressure pump motors and thrusters across 150–300 m cage runs with low voltage drop
- Surface-floating cage-collar safety: Calibrated -15 to -45 kg/km positive seawater flotation keeps the bright-yellow umbilical visible on the surface away from cage mooring bridles, sinker tubes and workboat propellers
- Fish-oil, H2O2 & copper-paint resistant: Crosslinked/ether-grade Shore 94A yellow PUR sheath resists salmon feed lipids, hydrogen-peroxide delousing baths, copper-oxide net coatings, UV and freezing Nordic winters (-35 °C)
- High-cycle crane sheave & capstan life: Torque-balanced aramid / LCP braid (18–55 kN MBL) and short-pitch Class 5/6 tinned-copper cores withstand daily deployment over service-boat knuckle-boom crane sheaves
- Continuous bulk drum, MOQ 50 m: Supplied in 150 m, 200 m, 250 m or custom lengths (MOQ 50 m) on wooden reels with heat-shrink water-blocking end caps in 7 to 45 working days
| Parameter | Value |
|---|---|
| Rated voltage | 0.6/1 kV AC (supports 400 V, 480 V, 690 V and 1000 V three-phase VFD motors; 1.2 kV max) and up to 1500 V DC; 250 V data pairs |
| Power conductor range | 4G2.5 mm2 inspection/grooming crawlers up to 4G6, 4G10, 4G16, 3x25+3G4 and 3x35+3G6 mm2 heavy net-washing rigs |
| Seawater flotation profile | Positively buoyant (-10 to -45 kg/km in SG 1.025 seawater) so unused umbilical floats visibly on the cage surface |
| Jacket chemical and cold rating | -35 °C cold-bend to +80 °C; resistant to salmon/fish oils, hydrogen peroxide (H2O2), peracetic acid, copper antifoulants and UV |
| Supply form and MOQ | Continuous bulk cable on wooden drums with heat-shrink water-blocking end caps (connectors installed by client); MOQ 50 m in 7 to 45 working days |
| Tensile and dynamic bend | 18 kN to 55 kN minimum breaking load (aramid braid); 6 x OD static and 10 x OD dynamic flexing over workboat rollers and reels |
| Telemetry options | Subsea Cat 6 gigabit Ethernet, 4 to 8 SM/MM stainless-tube FIMT optical fibers, RS-485/CAN pairs and optional PA air/dosing micro-tube |
TF-AQUACLEAN (15–75 kW) High-Power Net-Cleaning Robot Umbilical Schedule
| Model & Washer Power | 0.6/1 kV Tinned Cu Power Cores | Camera Ethernet / Fiber & Control | Nom. OD (mm) | Seawater Trim SG 1.025 (kg/km) | Aramid MBL (kN) | Min. Dyn. Bend Radius (mm) | Next step |
|---|---|---|---|---|---|---|---|
| TF-AQUACLEAN 15K-4G6 | 4G6.0 mm² Class 5/6 | Subsea Cat 6 + 2×2×0.50 mm² | 21.5 | -15 (Floating Yellow PUR) | 20 | 215 | Request this size |
| TF-AQUACLEAN 25K-4G10 | 4G10 mm² Class 5/6 | Subsea Cat 6 + 2×2×0.50 mm² | 25.4 | -20 (Floating Yellow PUR) | 28 | 255 | Request this size |
| TF-AQUACLEAN DC1000-4G10 | 4G10 mm² (1,000 V DC Bus) | 4 SM FIMT + 2×2×0.50 mm² | 24.8 | -18 (Floating Yellow PUR) | 28 | 250 | Request this size |
| TF-AQUACLEAN 37K-4G16 | 4G16 mm² Class 5/6 | 4 SM FIMT + Subsea Cat 6 | 29.8 | -26 (Floating Yellow PUR) | 36 | 300 | Request this size |
| TF-AQUACLEAN 55K-3X25 | 3 × 25 + 3G4 mm² (Symmetrical VFD) | 4 SM/MM FIMT + Subsea Cat 6 | 34.6 | -35 (Floating Yellow PUR) | 45 | 350 | Request this size |
| TF-AQUACLEAN 75K-3X35 | 3 × 35 + 3G6 mm² (Symmetrical VFD) | 8 SM/MM FIMT + 2×2×0.75 mm² | 39.8 | -45 (Floating Yellow PUR) | 55 | 400 | Request this size |
TF-AQUACLEAN Compact Net-Grooming & Mort-Recovery ROV Schedule
| Model & Duty | Power Conductors | Data / Optical / Tube Package | Nom. OD (mm) | Seawater Trim (kg/km) | Aramid MBL (kN) | Bulk Reel MOQ | Next step |
|---|---|---|---|---|---|---|---|
| TF-AQUACLEAN ROV-4G2.5+Cat6 | 4G2.5 mm² (0.6/1 kV) | Subsea Cat 6 (4P×24 AWG) | 16.2 | -8 (Slightly Floating) | 12 | 50 m | Request this size |
| TF-AQUACLEAN ROV-4G4+4FO | 4G4.0 mm² (0.6/1 kV) | 4 SM FIMT + 2×2×0.34 mm² STP | 18.4 | -12 (Floating) | 18 | 50 m | Request this size |
| TF-AQUACLEAN HYD-4G6+PA | 4G6.0 mm² (0.6/1 kV) | Subsea Cat 6 + 6 mm PA Air/Sensor Tube | 23.6 | -18 (Floating) | 24 | 50 m | Request this size |
Why 690 V / 1,000 V matters on 200 m fish-farm runs: stepping three-phase motor supply from 400 V up to 690 V or 1,000 V reduces conductor current by 42%–60%, allowing a 45 kW net washer to run on a flexible 4G16 mm² floating umbilical instead of a stiff 50 mm² cable.
ASCII part references for BOM and ERP entry: TF-AQUACLEAN-15K-4G6, TF-AQUACLEAN-25K-4G10, TF-AQUACLEAN-DC1000-4G10, TF-AQUACLEAN-37K-4G16, TF-AQUACLEAN-55K-3X25, TF-AQUACLEAN-75K-3X35, TF-AQUACLEAN-ROV-4G2P5, TF-AQUACLEAN-ROV-4G4, TF-AQUACLEAN-HYD-4G6.
TF-AQUACLEAN Marine 1 kV Power & Cold-Bend Standards
| Standard or specification | Application |
|---|---|
| IEC 60092-353 & IEC 60228 Class 5 / Class 6 Tinned Copper | 0.6/1 kV extruded XLPE/HEPR marine power core insulation supporting 690 V and 1,000 V VFD pump drives. |
| IEC 60811 Oil / Cold-Bend & IEC 60794-3 Subsea Optical Standards | -35 °C sub-zero deck flexibility, lipid/chemical sheath endurance and crush-resistant stainless-steel FIMT fiber protection. |
Certifications and document support
TEBAOFLEX ISO 9001 quality management and HV/insulation factory testing
IEC 60092-353 — Offshore and marine 1 kV extruded power cable design reference
ISO 13628-5 — Dynamic subsea electro-optical umbilical engineering principles
Related cable options
Compare these cable options by service combination, movement, load, voltage and transmission requirement.
TF-OWIND Offshore Wind Monopile, Jacket & Mooring Chain Cleaning & NDT Crawler Dynamic Umbilical Cable (690 V–3.3 kV)
A related cable option for a different application or duty profile.
View productTF-HULL Ship Hull Biofouling Cleaning & Grooming Robot Buoyant Hybrid Tether Cable (8GAX50, 12GAX49, 24XM308 & 13XM469 Series)
A related cable option for a different application or duty profile.
View productSeabed Ocean-Observation, Borehole Sensing & Submersible Aquaculture Composite Cable
A related cable option for a different application or duty profile.
View productRequest a cable recommendation and quotation
Send the required services, cable length, mechanical duty, environment, termination and quantity. Our team will review the application before quoting.
- Include the product name or SKU plus the required cable length and quantity.
- Attach a specification, drawing or data sheet when available.




