



DFP-EO & DFP-EOB Dredger, Floating Pontoon & Barge Dynamic Power-Optical Umbilical Cable
DFP-EO and DFP-EOB dynamic dredger, floating pontoon and barge power-optical umbilical cables (0.6/1 kV to 3.6/6 kV, Um 7.2 kV) integrate IEC 60228 Class 5 tinned copper power cores (16 to 120 mm²), screened control pairs and 12 to 24 single-mode optical fibres inside aramid or galvanized steel-braid reinforced hydrolysis-resistant PUR/SHF2 double sheaths (29.5 to 55.0 mm OD, 10 to 12x OD dynamic bend).
DFP-EO and DFP-EOB dynamic power-optical umbilical cables deliver continuous three-phase electric pump/winch power (0.6/1 kV, 3.3 kV and 6.6 kV), PLC/SCADA instrumentation pairs and 12 to 24 bend-insensitive optical fibres across cutter-suction dredgers (CSD), floating slurry discharge pipelines, Ro-Ro linkspan pontoons, floating drydocks and barge-to-shore wave crossovers (29.5 to 55.0 mm OD, 88 to 285 A).
Unlike rigid Class 2 shipboard cables that suffer strand fatigue across articulated pontoon hinges or bare steel-wire ROV lift cables that chafe polyurethane pipeline floats, DFP-EO assemblies lay fine-stranded ASTM B 33 / IEC 60228 Class 5 tinned copper conductors, 90 °C HEPR elastomer insulation, screened RS-485/Profibus/4–20 mA pairs and a gel-filled 316L stainless-steel FIMT around an elastomeric anti-buckling centre. An inner water-blocked elastomer sheath locked to a heavy slurry-grade polyether PUR (11Y) or SHF2 outer jacket via open-weave aramid braid (DFP-EO) or galvanized steel wire braid (DFP-EOB) prevents core corkscrewing under ±25 °/m multi-axis wave pitch and roll.
Specify DFP-EO when strapping composite power-optical runs along floating dredge pipelines with detachable closed-cell foam collars or hanging catenary loops between barges, Pontoons and quay walls; select DFP-EOB when cables cross crushed-rock decks or submerged cutter ladders. For 340 to 670 kN winch-lifted steel-armoured ROV/pontoon umbilicals see our RS726 & RS935 Umbilical & Deck Cable, or for 12/20 kV solar farm feeders see our NTSCGCWOEU Floating PV Shore Cable (MOQ 50 m, 7 to 45 working days).
Explore the marine, offshore and shipboard cable range for related configurations.
DFP-EO & DFP-EOB Dynamic Power-Optical Dredger & Pontoon Umbilical Construction
Every TEBAOFLEX DFP-EO and DFP-EOB composite umbilical is engineered with short-pitch torsion-balanced cabling, longitudinal water-blocking fillers and pressure-extruded inner/outer elastomer sheaths to withstand 24/7 wave flexing, saddle clamping and abrasive harbour silt.

| Component | Material and construction |
|---|---|
| 1. Flexible Tinned Copper Power Conductors (0.6/1 kV to 3.6/6 kV) | Fine-stranded annealed tinned copper per IEC 60228 Class 5 and ASTM B 33 (16 mm² to 120 mm² phase cores plus full or split concentric earth conductors), insulated with 90 °C HEPR rubber (plus extruded inner/outer semiconducting screens and copper tape/wire earth screens on 3.3 kV and 6.6 kV builds). |
| 2. Individually Screened Control & Instrumentation Pairs | Two to six twisted pairs (1.0 mm² or 1.5 mm² Class 5 tinned copper, HEPR/EPR insulated) each shielded with tinned copper drain wire, 100% Al/PET tape and >= 85% tinned copper braid to isolate 4–20 mA dredge pressure transducers, gyrocompass and CAN/RS-485 loops from VFD switching noise. |
| 3. Hermetic 316L Stainless-Steel Optical Unit (FIMT) | Laser-welded 316L stainless-steel micro-tube (2.4 to 3.2 mm OD) filled with thixotropic water-blocking gel and over-sheathed with PE/TPEE to match control-unit pitch diameter, protecting 12 or 24 ITU-T G.657.A1 single-mode (or OM3 multimode) fibres against radial saddle clamping. |
| 4. Water-Blocked Elastomeric Inner Sheath | Hydrolysis-resistant cross-linked elastomer or thermoplastic inner bedding extruded under pressure into interstices with swelling yarns so jacket pinholes cannot wick seawater along the cable length. |
| 5A. Anti-Torsion Aramid Braid + Heavy PUR / SHF2 Outer Jacket (DFP-EO) | High-modulus open-weave aramid strength braid (18 to 60 kN dynamic pull rating, ±25 °/m torsion stability) embedded inside a tear-, mud-, oil- and UV-resistant high-visibility yellow or black polyether PUR (11Y per EN 50363-10-2) or SHF2 elastomer outer sheath. |
| 5B. Galvanized Steel Wire Braid + Heavy PUR Over-Sheath (DFP-EOB) | High-coverage (>= 85%) galvanized or tinned steel wire braid encapsulated beneath a 3.0 to 4.2 mm cut-resistant outer polyether PUR sheath for submerged dredge cutter ladders, spud-carriage loops and heavy deck vehicle crossovers. |

DFP-EO / DFP-EOB Model & Composite Core Code Breakdown
- DFP-EO / DFP-EOB: Dredger, Floating Pontoon and Barge Electro-Optical dynamic umbilical with aramid anti-torsion braid (DFP-EO) or galvanized steel wire braid under outer PUR (DFP-EOB)
- 1KV / 3.3KV / 6.6KV: power circuit rated voltage class: 0.6/1 (1.2) kV low voltage, 1.8/3.0 (3.3) kV or 3.6/6 (7.2) kV individually screened medium voltage
- 4x35 / 3x70+1x35 / 3x50+3x25/3: flexible IEC 60228 Class 5 tinned copper phase and protective-earth conductor count and nominal cross-section in mm²
- 4x2x1.0 / 6x2x1.0 / 4x2x1.5: individually Al/PET + tinned-copper-braid screened control and instrumentation twisted pairs for dredge sensors, RS-485 and PLC I/O
- 12SM / 24SM (FIMT): 12 or 24 ITU-T G.657.A1 single-mode optical fibres hermetically housed inside a gel-filled laser-welded 316L stainless-steel micro-tube
DFP-EO Cutter-Suction Dredger, Floating Pipeline, Pontoon & Barge Applications
Deploy DFP-EO and DFP-EOB composite umbilicals across electric dredging spreads, modular floating pontoons, ship-repair drydocks and nearshore marine civil engineering barges.

- Electric cutter-suction dredger (CSD) and floating booster-pump pipelines routing LV/MV power, slurry pressure/flow telemetry and gigabit PLC fibre across collared floating discharge pipes.
- Articulated Ro-Ro linkspan pontoons, floating ferry terminals, link bridges and modular construction barges subject to continuous tidal heave and multi-axis wave sway.
- Cutter-ladder gimbal loops, submerged dredge suction-head sonar/camera umbilicals and spud-pole carriage festoons requiring cut-resistant DFP-EOB braided protection.
- Floating drydock-to-quay and accommodation-barge-to-platform dynamic catenary crossovers consolidating 400–690 V or 3.3–6.6 kV shore power and fibre-optic SCADA into a single umbilical.
DFP-EO Dynamic PUR Umbilical vs RS726 Steel-Armoured Winch Umbilical vs Floating PV Cable
| Cable Family | Voltage & Core Makeup | Armour & Outer Jacket | When to Specify |
|---|---|---|---|
| DFP-EO / DFP-EOB Dynamic Umbilical (this page) | 0.6/1 to 6.6 kV Class 5 Cu + screened pairs + 12–24SM FIMT | Aramid or GSWB braid inside thick slurry-grade PUR / SHF2 | Cutter-suction dredgers, floating pipelines, linkspan pontoons & barge crossovers |
| RS726 & RS935 ROV / Pontoon Winch Umbilical | 3.3 to 4.5 kV MV cores + control quad + 8–12SM FIMT | Bare contra-helical Zn-5Al steel wire armour (340–670 kN) or FMBP | High-tension Lebus winch lifting, work-class ROVs & 1:1 41.0 mm spare drums |
| OMB Subsea Electro-Hydraulic Umbilical | 250 V to 3.3 kV electrical + FIMT + thermoplastic hoses | Aramid braid + hydrolysis-resistant PUR over hose bundle | Subsea trenchers, ploughs & hydraulic cutter tools needing fluid power lines |
| NTSCGCWOEU Floating PV Shore Cable | 6/10 kV to 12/20 kV 3-core + split earth power only | Heavy double rubber sheath (5GM5) without optical/control bundle | Medium-voltage AC feeder runs from floating solar islands to shore substations |
Select DFP-EO / DFP-EOB whenever abrasive slurry floats, articulated pontoon ramps or frequent wave flexing require an external elastomer/PUR jacket over fine-stranded Class 5 power + fibre cores.
DFP-EO & DFP-EOB Dredger & Floating Pontoon Umbilical RFQ Checklist
- System power voltage (0.6/1 kV, 3.3 kV, 6.6 kV or 10 kV), three-phase motor/load current (A) and required phase + earth cross-section (mm²).
- Control and instrumentation circuit count (for example 4x2x1.0 mm² or 6x2x1.5 mm² individually screened pairs for 4–20 mA, RS-485 or CAN).
- Optical fibre count and mode (for example 12 or 24 ITU-T G.657.A1 single-mode or OM3 50/125 µm multimode fibres in 316L stainless FIMT).
- Mechanical routing mode: strapped to floating dredge pipeline collars, free-hanging ship-to-pontoon catenary, submerged cutter ladder (DFP-EOB steel braid) or motorized reeling drum.
- Outer diameter constraint (if matching existing pontoon glands, slip-ring boxes or float clamps), cut length per drum (MOQ 50 m) and target delivery schedule (7 to 45 working days).
Related selection resources
- Marine, offshore, dredger and subsea umbilical cable catalog
- Custom subsea, floating marine and offshore umbilical engineering solutions
- RS726 & RS935 Steel-Armoured Pontoon, ROV Winch & Companion FMBP Deck Cable
- Heavy-Duty Aramid-Reinforced PUR Subsea Trencher & Plough Umbilical Cable
- Case study: 300 m exact-OD composite spare pontoon umbilical delivery in Southeast Asia
- Engineering guide: Matching replacement umbilical OD to winch grooves, sheaves and glands
DFP-EO Dredger, Floating Pontoon & Barge Umbilical Frequently Asked Questions
Can DFP-EO umbilical cables float on water alongside a dredger discharge pipeline?
DFP-EO composite power-optical umbilicals have a specific gravity of 1.8 to 2.4 in air/water due to copper conductors, so they are engineered with a smooth, abrasion-resistant yellow polyether PUR jacket sized to clamp directly into standard split closed-cell PE/EVA pipeline buoyancy collars or strap onto floating slurry pontoons without jacket cutting.
When should I choose DFP-EOB galvanized steel-braided PUR over aramid-braided DFP-EO?
Specify DFP-EOB (galvanized steel wire braid under a 3.0 to 4.2 mm outer PUR jacket) whenever the umbilical runs down a submerged cutter-suction dredge ladder, crosses rock-strewn barge decks or faces pinch/crush hazards; choose lighter aramid-braided DFP-EO (10x OD dynamic bend radius) for long floating pipeline spans and wave-flexing pontoon hinges.
How are optical fibres protected against crushing in DFP-EO dredger and pontoon umbilicals?
12 or 24 bend-insensitive ITU-T G.657.A1 optical fibres are hermetically enclosed inside a laser-welded 316L stainless-steel tube (FIMT) filled with water-blocking gel and buffered with thermoplastic elastomer before cabling, preventing micro-bending attenuation under pipeline saddle clamps and ±25 °/m wave torsion.
Can TEBAOFLEX match an existing pontoon or dredger umbilical outer diameter for a 100 m to 500 m spare length?
Yes. TEBAOFLEX custom-engineers core layup, filler geometry and PUR/SHF2 wall thickness to match existing cable gland stuffing tubes, float saddle clamps and winch slip-ring entries within ±0.8 to 1.2 mm, with a minimum order quantity of 50 m and 7 to 45 working days production lead time.
Are 3.3 kV and 6.6 kV DFP-EO medium-voltage dredger umbilicals individually screened for VFD pump drives?
Yes. Every 1.8/3.0 (3.3) kV and 3.6/6 (7.2) kV DFP-EO phase conductor incorporates extruded semiconducting conductor and insulation screens plus a concentric tinned copper wire/tape metallic earth screen, while control pairs carry separate Al/PET + tinned copper braid shields for VFD EMC immunity.
DFP-EO & DFP-EOB Dimensional, Ampacity, Bend-Radius & Pulling-Load Schedule
DFP-EO & DFP-EOB Key Voltage, Composite Core, Sheath & Supply Summary
- LV & MV composite power range: 0.6/1 kV, 1.8/3.0 (3.3) kV and 3.6/6 (7.2) kV flexible Class 5 tinned copper cores from 4x16 mm² up to 3x120+1x70 mm²
- Integrated PLC & optical telemetry: 2 to 6 individually Al/PET + tinned-copper-braid screened control pairs (1.0–1.5 mm²) plus 12 or 24 ITU-T G.657.A1 single-mode fibres in 316L FIMT
- Wave-flexing & slurry durability: Double-extruded polyether PUR (11Y) or cross-linked SHF2 outer sheath resisting sand/mud slurry abrasion, diesel splash, UV and ±25 °/m roll torsion
- Two reinforcement architectures: Open-weave aramid anti-torsion braid (DFP-EO, 18 to 60 kN) for floating pipeline catenaries or galvanized steel wire braid under PUR (DFP-EOB) for deck/ladder crush
- Short-run & exact-OD supply: Minimum order quantity 50 m (including 100 to 600 m pontoon jumpers and floating pipeline spans) manufactured in 7 to 45 working days
| Parameter | Value |
|---|---|
| Rated voltage | 0.6/1 kV (Um 1.2 kV), 1.8/3.0 kV (Um 3.3 kV) and 3.6/6 kV (Um 7.2 kV) AC power cores with 250 V screened control pairs |
| Composite core architecture | 3 or 4 Class 5 tinned copper power cores (16 to 120 mm²) plus 2 to 6 screened control pairs and 12 or 24 G.657.A1 optical fibres in 316L FIMT |
| Reinforcement and outer sheath | Aramid anti-torsion braid (DFP-EO) or galvanized steel wire braid (DFP-EOB) inside heavy hydrolysis- and slurry-resistant polyether PUR or SHF2 sheath |
| Outer diameter and tensile rating | 29.5 mm to 55.0 mm nominal outer diameter with 18 kN to 60 kN maximum dynamic pulling load and plus or minus 25 deg/m torsion limit |
| Dynamic bend radius and supply | 10x OD (DFP-EO) or 12x OD (DFP-EOB) minimum dynamic bend radius with MOQ 50 m and 7 to 45 working days manufacturing lead time |
| Operating temperature and water depth | -40 °C to +90 °C conductor temperature (-35 °C to +80 °C flexing in water/slurry), continuous submergence rated to 100 m (1.0 MPa) |
| Optical attenuation and HV test | <= 0.38 dB/km at 1310 nm and <= 0.25 dB/km at 1550 nm (ITU-T G.657.A1); 3.5 kV AC (0.6/1 kV), 6.5 kV AC (3.3 kV) or 11 kV AC (6.6 kV) 5 min routine test |
DFP-EO & DFP-EOB Dynamic Dredger & Pontoon Umbilical Dimensional & Ampacity Schedule
| Model & Composite Configuration | Rated Voltage (kV) | Nominal OD (mm) | Reinforcement & Sheath | Current at 30 °C Air (A) | Weight in Air (kg/km) | Min. Dynamic Bend | Max. Pull (mm | kN) | Next step |
|---|---|---|---|---|---|---|---|
| DFP-EO-1KV 4x16+4x2x1.0+12SM | 0.6/1 (1.2) | 29.5 ± 1.0 | Aramid Braid + Heavy PUR (11Y) | 88 | 1380 | 295 | 18.0 | Request this size |
| DFP-EOB-1KV 4x25+4x2x1.0+12SM | 0.6/1 (1.2) | 35.2 ± 1.0 | Galv. Steel Braid + Outer PUR | 110 | 2460 | 425 | 35.0 | Request this size |
| DFP-EO-1KV 4x35+6x2x1.0+12SM | 0.6/1 (1.2) | 36.8 ± 1.0 | Aramid Braid + Heavy PUR (11Y) | 138 | 2390 | 370 | 28.0 | Request this size |
| DFP-EO-1KV 3x70+1x35+4x2x1.5+12SM | 0.6/1 (1.2) | 44.5 ± 1.2 | Aramid Braid + Slurry PUR (11Y) | 207 | 3920 | 445 | 42.0 | Request this size |
| DFP-EO-1KV 3x120+1x70+4x2x1.5+24SM | 0.6/1 (1.2) | 55.0 ± 1.5 | Aramid Braid + Heavy PUR / SHF2 | 285 | 6340 | 550 | 60.0 | Request this size |
| DFP-EO-3.3KV 3x35+3x16/3+2x2x1.0+12SM | 1.8/3.0 (3.3) | 43.0 ± 1.2 | MV Screen + Aramid + Heavy PUR | 135 | 3480 | 520 | 40.0 | Request this size |
| DFP-EO-6.6KV 3x50+3x25/3+2x2x1.5+12SM | 3.6/6 (7.2) | 49.5 ± 1.5 | MV Screen + Aramid + PUR / SHF2 | 168 | 4650 | 600 | 52.0 | Request this size |
DFP-EO Sheath, Steel-Braid & Floating-Pipeline Deployment Options
| Option Code | Jacket / Protection Architecture | Abrasion, Oil & Mud Rating | Buoyancy / Deployment Mode | Typical Dredge & Pontoon Duty |
|---|---|---|---|---|
| DFP-EO-PUR (Standard) | Inner elastomer + open aramid braid + polyether PUR (11Y) | EN 50363-10-2 tear/slurry abrasion & hydrolysis resistant | Sinking catenary or strapped to pipeline floats | Floating discharge pipelines, Ro-Ro linkspans & barge hinges |
| DFP-EO-SHF2 | Inner HEPR bedding + aramid braid + cross-linked SHF2 | IEC 60092-360 SHF2 oil, drilling-fluid & flame retardant | Deck tray, catenary loop or splash-zone hanger | Floating drydocks, accommodation barges & port link bridges |
| DFP-EOB-PUR (Armoured) | Inner elastomer + >= 85% GSWB steel braid + thick PUR | High radial crush, rock impact & dredge ladder cut protection | Submerged ladder gimbal or deck vehicle ramp | Cutter-suction dredge ladders, spud carriages & rock barges |
| DFP-EO-FLT (Float-Ready) | Smooth low-friction yellow PUR calibrated for split foam collars | UV-stabilized high-visibility marine yellow outer jacket | Surface self-floating via clamped PE/EVA collars | Ship-to-shore dredge slurry lines & modular booster pontoons |
Continuous current ratings are reference values at 30 °C ambient air (IEC 60092-352 / DIN VDE 0298-4 basis for three loaded phase conductors); apply standard derating for multi-layer reeling drums or solar-exposed deck trays, and final values are confirmed on the quotation drawing.
Custom composite layouts (including 6/10 kV MV cores, OM3/OM4 multimode fibres, Cat6A industrial Ethernet quads and exact outer-diameter matching within ±0.8–1.2 mm to fit existing saddle clamps or slip-ring glands) are engineered to order.
Minimum order quantity is 50 m with a production lead time of 7 to 45 working days, delivered on export-grade wooden or steel drums with factory HV dielectric and OTDR trace reports.
ASCII part references for BOM and ERP entry: DFP-EO-1KV-4X16-12SM; DFP-EOB-1KV-4X25-12SM; DFP-EO-1KV-4X35-12SM; DFP-EO-1KV-3X70-1X35-12SM; DFP-EO-1KV-3X120-1X70-24SM; DFP-EO-3.3KV-3X35-12SM; DFP-EO-6.6KV-3X50-12SM; TF-DFP-EO-DREDGER-UMB.
DFP-EO Marine Conductor, Elastomer Sheath & Optical Fibre Standards
| Standard or specification | Application |
|---|---|
| IEC 60228 Class 5 & ASTM B 33 | Fine-stranded annealed tinned copper conductors engineered for multi-million-cycle wave flexing and corrosion resistance in brackish and marine atmospheres. |
| IEC 60092-350 / IEC 60092-353 / IEC 60092-360 | Offshore and marine electrical core design, 90 °C HEPR insulation thickness schedule and SHF2 cross-linked elastomeric sheathing reference. |
| EN 50363-10-2 / DIN VDE 0282-10 (11Y Polyether PUR) | Heavy-duty hydrolysis-, microbe-, sand-slurry- and tear-resistant polyurethane outer sheath specification for wet dynamic trailing and floating cables. |
| ITU-T G.657.A1 & Laser-Welded 316L FIMT | Bend-insensitive single-mode optical fibres housed in gel-filled stainless-steel micro-tubes maintaining <= 0.38 / 0.25 dB/km attenuation at 1310 / 1550 nm under dynamic bending. |
Certifications and document support
TEBAOFLEX ISO 9001 quality management, HV AC/DC dielectric and OTDR optical test documentation
Related cable options
Compare these cable options by service combination, movement, load, voltage and transmission requirement.
TF-AQUACLEAN Offshore Aquaculture Net-Cleaning Robot Buoyant Hybrid Umbilical Cable (690 V / 1,000 V, 15–75 kW)
A related cable option for a different application or duty profile.
View productTF-HULL Ship Hull Biofouling Cleaning & Grooming Robot Buoyant Hybrid Tether Cable (8GAX50, 12GAX49, 24XM308 & 13XM469 Series)
A related cable option for a different application or duty profile.
View productRS726 & RS935 Work-Class ROV, Pontoon & Winch Electro-Optical Umbilical & Deck Cable (3.3–4.5 kV)
A related cable option for a different application or duty profile.
View productRequest a cable recommendation and quotation
Send the required services, cable length, mechanical duty, environment, termination and quantity. Our team will review the application before quoting.
- Include the product name or SKU plus the required cable length and quantity.
- Attach a specification, drawing or data sheet when available.





