UL 1056 PVC Appliance Wire, 105°C 600V
UL 1056 is a UL-certified PVC appliance wire rated 105°C and 600 V AC for internal wiring in indoor or outdoor refrigerating equipment. Its stranded copper conductor and thick PVC wall form a single-conductor lead for equipment assemblies that specify this AWM style.
- Voltage: 600 V AC
- Temperature: 105°C
- Insulation / covering: extruded PVC
- Size selection: 20–10 AWG
- Certification: UL-certified AWM; UL 758
UL 1056 wire selection
UL 1056 is a UL-certified PVC appliance wire rated 105°C and 600 V AC for internal wiring in indoor or outdoor refrigerating equipment. Its stranded copper conductor and thick PVC wall form a single-conductor lead for equipment assemblies that specify this AWM style.
The six configurations below run from 20 AWG to 10 AWG. All use a nominal 1.52 mm insulation wall, while the finished diameter increases from 4.00 mm to 6.05 mm. That difference matters when a replacement lead must fit an existing terminal boot, entry sleeve or harness route. Match both the conductor size and the available clearance before selecting a row.
For refrigeration equipment, check the temperature at the connection as well as along the wire route. A hot terminal or a restricted passage can govern the selection even when the surrounding cabinet is cooler. The equipment wiring application does not establish suitability as an exposed outdoor power cord.
See the Specifications tab for the model and size tables. Browse the high-temperature cable range for related constructions. Compare higher-temperature silicone hook-up wire family when PVC is outside the duty range.
Construction
UL 1056 uses the following conductor and insulation system. The diagram illustrates the layer sequence; select the conductor construction and covering shown in the required size specification.
| Component | Construction detail |
|---|---|
| Conductor | Stranded bare or tinned copper |
| Insulation | Extruded PVC |
| Construction | Single insulated conductor |
Applications
UL 1056 suits internal lead connections in refrigerating equipment where the equipment specification calls for 600 V PVC insulation at 105°C. Keep the lead supported inside the assembly and check entry protection at sheet-metal edges.
UL 1056 replacement selection
For replacement enquiries, include the existing wire marking and the equipment connection drawing so the conductor, insulation and terminal arrangement can be matched.
Specifications
| Parameter | Specification |
|---|---|
| UL style | UL 1056 |
| Voltage rating | 600 V AC |
| Temperature rating | 105°C |
| Insulation / covering | extruded PVC |
| Conductor size coverage | 20–10 AWG |
| Nominal PVC wall | 1.52 mm / 0.060 in |
| Minimum average PVC wall | 60 mils |
| Minimum PVC wall at any point | 54 mils |
| Model and conductor size | Stranding (No. × mm) | PVC wall (mm) | Nominal OD (mm) |
|---|---|---|---|
| UL 1056 20 AWG | 21 × 0.18 | 1.52 | 4.00 |
| UL 1056 18 AWG | 16 × 0.254 | 1.52 | 4.20 |
| UL 1056 16 AWG | 26 × 0.254 | 1.52 | 4.50 |
| UL 1056 14 AWG | 41 × 0.254 | 1.52 | 4.95 |
| UL 1056 12 AWG | 65 × 0.254 | 1.52 | 5.40 |
| UL 1056 10 AWG | 105 × 0.254 | 1.52 | 6.05 |
Selecting the specified construction
Specify UL 1056, AWG, bare or tinned conductor, insulation colour and required length. Match the 1.52 mm wall and finished diameter when replacing an existing harness lead.
Standards
TEBAOFLEX UL 1056 wire is UL-certified appliance wiring material.
| Item | Requirement or reference |
|---|---|
| Certification | UL-certified AWM |
| Style designation | UL 1056 |
| Construction standard | UL 758 — Appliance Wiring Material |
| Style flame classification | Horizontal flame |
Identify the UL style, conductor size, voltage and temperature grade on the purchasing specification. Include the required product identification and certification documents with the enquiry.
Request a cable recommendation and quotation
Send the required services, cable length, mechanical duty, environment, termination and quantity. Our team will review the application before quoting.
- Include the product name or SKU plus the required cable length and quantity.
- Attach a specification, drawing or data sheet when available.