Low Voltage PUR-C-HF EMC Festoon Cable

Low Voltage PUR-C-HF EMC Festoon Cable 0.6/1kV

The Low voltage PUR-C-HF EMC Festoon Cable is a screened 0.6/1kV power and control cable for festoon systems, drag chains, machine tools and material handling equipment where frequent bending, oil exposure and electromagnetic interference must be considered together.

Voltage rating: 0.6/1kV, also marked 600/1000V.
Conductor: Plain copper, flexible class 5 according to DIN EN 60228 / DIN VDE 0295.
Screen: Tinned copper wire braid, minimum 80% coverage for EMC protection.
Sheath: PUR-HF, halogen free, flame retardant, black outer sheath.
Temperature range: -40°C to +80°C in fully flexible operation; -50°C to +80°C for fixed installation.
Applications: Festoon systems, drag chains, drag lines, cranes, machine tools and material handling systems.

Request a Quote

Low voltage PUR-C-HF EMC Festoon Cable for Moving Industrial Equipment

Key Features

EMC screened design: The TCWB tinned copper wire braid with minimum 80% coverage helps protect control and power circuits from electromagnetic influence.
Built for motion: Suitable for festoon and chain systems with travel speeds up to 210 m/min, subject to system length and installation conditions.
Durable PUR-HF sheath: The halogen-free, flame-retardant polyurethane sheath resists oil, hydrolysis, solvents, alkalis, ozone, UV and moisture.
Low-voltage industrial rating: Rated at 0.6/1kV with 3.5kV AC factory test voltage for 5 minutes.
Wide selection range: Available in screened single-core power cable, multi-core power cable, control cable and screened pair constructions.

Technical Specifications

Product Name	Low Voltage PUR-C-HF EMC Festoon Cable
Type Designation	FESTOON PUR-C-HF
Rated Voltage	0.6/1kV, 600/1000V
AC / DC Operating Voltage	AC Uo/U 0.7/1.2kV; DC Uo/U 0.9/1.8kV
Temperature Range	-40°C to +80°C flexible; -50°C to +80°C fixed
Conductor Temperature	90°C maximum; 250°C short circuit
Minimum Bending Radius	6 x D; 20 x D for S-type directional changes
Tensile Load	Up to 15 N/mm²
Torsional Stress	±25°/m
Travel Speed	Up to 210 m/min in festoon or chain systems
Standards	Generally to IEC 60502, IEC 60228, IEC 60332-1, DIN VDE 0293-308, DIN VDE 0298 and related DIN VDE / EN 60811 test standards

Cable Construction

Conductor: Plain copper, flexible class 5.
Insulation: Halogen-free compound based on polyester.
Lay-up: Central textile strength member with cores or pairs laid up in concentric layers.
Inner sheath: PUR-HF polyurethane inner sheath where required by cross-section design.
Screen: TCWB tinned copper wire braid, minimum 80% coverage.
Outer sheath: PUR-HF polyurethane, halogen free, flame retardant, black opaque finish.

Applications

Festoon systems for cranes, hoists and moving industrial equipment.
Drag chain systems requiring screened low-voltage power or control cable.
Machine tools, drag lines and automated material handling systems.
Outdoor and indoor installations exposed to oil, moisture, ozone or UV.
Industrial areas where EMC protection is required for reliable control signals.

FAQ

What is the Low voltage PUR-C-HF EMC Festoon Cable used for?

The Low voltage PUR-C-HF EMC Festoon Cable is used as a screened power and control cable in festoon systems, drag chains, machine tools, drag lines and material handling equipment.

Why does this cable use a tinned copper wire braid?

The TCWB screen provides EMC protection by reducing the effect of electromagnetic interference on the cable circuit, which is important in crane, automation and motor-driven equipment environments.

Can this cable be used outdoors?

Yes. The PUR-HF outer sheath is suitable for indoor and outdoor use and is resistant to ozone, UV, moisture, oils and weather exposure.

What information is needed for a quotation?

Please provide the cable size, number of cores or pairs, required length, application type, travel distance, bending radius, operating speed and any special marking or packing requirements.