NGRDGöu-O 0.6/1 kV Screened Round Festoon Cable

NGRDGöu-O 0.6/1 kV screened round festoon cable

NGRDGöu-O is a screened round festoon cable for flexible power and control connections on cranes, hoists, transport equipment and other moving machinery. The supplied family is rated 0.6/1 kV and is intended for medium mechanical stresses, frequent bending and service in dry, damp, wet or outdoor locations.

The construction uses flexible bare copper conductors, EPR-based insulation, a round festoon lay-up and a black polychloroprene outer sheath. The screened construction is selected where the cable route or connected equipment requires an EMC-oriented cable arrangement. The source lists both power-core and paired/control configurations, so the final selection should follow the circuit schedule rather than a size-only page.

• Voltage: U0/U 0.6/1 kV; 3 kV test voltage.
• Movement: approximately 5 × cable diameter minimum mobile bend reference.
• Temperature: mobile −25 to +90 °C; fixed −35 to +90 °C.
• Selection: confirm screen coverage, core layout, route, support length, speed and water exposure.

Use the Specifications tab to compare the supplied NGRDGöu-O configurations, then send the selected core arrangement, route, length and documentation requirements for a quotation.

NGRDGöu-O construction

The supplied NGRDGöu-O source identifies a round screened festoon construction for flexible crane and hoist routes. It uses flexible copper conductors, EPR insulation, a screened cable build-up and a black polychloroprene outer sheath. The page uses the requested NGRDGöu-O spelling for the family name; confirm the final core layout and screen construction against the approved drawing.

Applications

NGRDGöu-O is supplied for screened flexible connections in festoon systems, hoists, transport equipment, machine tools, cranes and container cranes. The source describes medium mechanical stress, frequent bending and use in dry, damp, wet and outdoor environments.

Selection checks

• Confirm the required power, control, earth, pilot or paired-core functions against the machine wiring schedule.
• Check the flat or round travel path, bend plane, support/trolley arrangement, speed, acceleration and free length.
• Confirm screen termination and EMC bonding where the selected construction includes copper screening.
• State the requested length, marking, drum or packing method, terminations and test documentation in the enquiry.

For unscreened power, multicore control or screened-pair bus configurations, compare the (N)GRDGOEU-J/-O round festoon cable. For an FC/VFD motor route requiring an overall copper screen and split protective-earth conductors, review the (N)GRDGCGOEU-J screened festoon cable. The final cable selection must follow the approved route geometry and product drawing.

NGRDGöu-O specifications

The following rows are transcribed from the supplied NGRDGöu-O datasheet. A dash or request note is retained where the source does not provide a value; no size-only product pages are created.

Operating reference: U0/U 0.6/1 kV; 3 kV test; conductor +90 °C; mobile −25 to +90 °C; fixed −35 to +90 °C; mobile bend approximately 5 × cable diameter; RoHS stated.

NGRDGöu-O standards and service limits

The source datasheet identifies the cable family with the following standard and operating references. These are recorded as source-listed values, not as a blanket project approval for every installation.

Include the required standard edition, test scope, route geometry and documentation requirements in the purchase enquiry.