Port & Festoon Cables TEBAOFLEX

(N)SHTÖU-J SPREADER 0.6/1 kV DIN VDE 0250-814 Vertical Drum and Basket Spreader Reeling Cable

(N)SHTÖU-J SPREADER (also written NSHTOEU-J Spreader) is a 0.6/1 kV multi-core reeling cable built with reference to DIN VDE 0250-814 for vertical spreader drums on ship-to-shore cranes, with class 5 copper, HEPR insulation, a vulcanized synthetic-thread anti-torsion braid between two yellow-black 5GM5 rubber sheaths, 15/30 N/mm² static/dynamic tensile load, ±50 °/m torsion and 240 m/min reeling speed in 36G1.5 to 56G2.5 mm² sizes.

Product information
SKU
TF-NSHTOEU-J-SPREADER
Brand
TEBAOFLEX
Product overview

(N)SHTÖU-J SPREADER cable feeds the headblock of ship-to-shore and gantry container cranes from a vertical spreader drum at 0.6/1 kV, using class 5 copper, HEPR cores, a vulcanized anti-torsion braid between two 5GM5 rubber sheaths and a yellow outer sheath, rated 30 N/mm² dynamic tensile, ±50 °/m torsion and 240 m/min reeling in 36G1.5 to 56G2.5 mm².

On a Super Panamax or Megamax quay crane, the spreader cable hangs vertically from a monospiral or cylindrical drum on the trolley and is pulled down and rewound with every container move, typically at hoisting speeds up to 180 m/min. The cable must carry its own weight over long lift heights, absorb shock loads when the spreader lands, and resist twisting as the headblock rotates. TEBAOFLEX builds (N)SHTÖU-J SPREADER with an extra-heavy-duty 5GM5 inner sheath pressed into the interstices, a synthetic-thread braid vulcanized onto it and a second 5GM5 outer sheath, so tensile and torsional forces are taken by the composite sheath rather than by the copper. A gravity-fed basket version rated 300/500 V for hoisting speeds up to 160 m/min is available for cranes using spreader baskets instead of motor drums.

Select this DIN VDE 0250-814 type when a crane specification calls for (N)SHTÖU-J SPREADER or NSHTOEU-J Spreader by name. For the general reeling version see NSHTÖU-J, and for halogen-free PUR spreader cable see D12YST11YU11Y-JZ.

Explore the port, crane reeling and festoon cable range for related configurations.

Construction

(N)SHTÖU-J SPREADER Cable Construction

(N)SHTÖU-J SPREADER is produced on TEBAOFLEX heavy-duty rubber lines with an in-line braiding step between the two 5GM5 sheath extrusions and continuous vulcanization.

Clean 2D cross-section of (N)SHTÖU-J SPREADER cable showing about 36 small copper cores in concentric layers, black 5GM5 inner sheath, textile braid ring and yellow outer sheath
(N)SHTÖU-J SPREADER cross-section: layered control cores inside a braid-reinforced double rubber sheath.
(N)SHTÖU-J SPREADER 0.6/1 kV DIN VDE 0250-814 Vertical Drum and Basket Spreader Reeling Cable construction
ComponentMaterial and construction
1. ConductorPlain annealed copper, finely stranded class 5 to IEC 60228.
2. InsulationHEPR compound to IEC 60502-1; cores to DIN VDE 0293-308 with green-yellow protective core.
3. Core arrangementMulti-cores stranded in concentric layers with optimised lay length for vertical reeling.
4. Inner sheathExtra-heavy-duty rubber type 5GM5 with reference to DIN VDE 0207-21, filling the interstices.
5. Anti-torsion reinforcementBraid of synthetic threads vulcanized between inner and outer sheath.
6. Outer sheathExtra-heavy-duty rubber type 5GM5, yellow for high visibility, inkjet marked; oil resistant to IEC 60811-404, flame retardant to IEC 60332-1-2.

(N)SHTÖU-J SPREADER Designation Breakdown

  • (N): Construction with reference to DIN VDE standards (not a certification mark)
  • SH: Heavy-duty rubber-sheathed flexible cable
  • T: Drum (reeling) design with textile anti-torsion reinforcement between the sheaths
  • ÖU (OEU): Outer sheath oil resistant (Ö) and flame retardant (U)
  • -J SPREADER: With green-yellow core; multi-core design for vertical spreader drums to DIN VDE 0250-814
Applications

(N)SHTÖU-J SPREADER Crane Applications

(N)SHTÖU-J SPREADER cables connect the crane trolley to the spreader headblock on container and bulk handling cranes.

Ship-to-shore container crane lifting a container with a yellow (N)SHTÖU-J SPREADER cable hanging vertically from the trolley drum to the spreader headblock
Typical duty: vertical spreader drum cable on a ship-to-shore container crane.
  • Ship-to-shore (STS) container cranes with vertical spreader drums, Super Panamax and Megamax classes.
  • Rail-mounted and rubber-tyred gantry cranes with motorized spreader reels in container terminals.
  • Gravity-fed spreader basket collectors on quay cranes (300/500 V basket version, up to 160 m/min).
  • Shipyard and heavy-lift hoists requiring vertical reeling of multi-core control cables.

(N)SHTÖU-J SPREADER vs Other Spreader Cable Families

(N)SHTÖU-J SPREADER vs other TEBAOFLEX spreader cable families
Cable familySheath and reinforcementDynamic ratingBest fit
(N)SHTÖU-J SPREADER (this page)Two 5GM5 rubber sheaths with vulcanized synthetic braid30 N/mm², ±50 °/m, 240 m/minSpecifications naming the DIN VDE 0250-814 spreader type
RXX / TRA-RF spreader vertical reeling cableReinforced rubber or PURUp to 30 N/mm²Spreader reels where rubber or PUR options are compared
D12YST11YU11Y-JZHalogen-free PUR with support elementHigh tensile, verticalHalogen-free spreader and vertical reeling duty
3GRDGÖU basket spreader cableRubber, roundGravity basket dutySpreader basket collectors

When the crane documentation names (N)SHTÖU-J SPREADER, quote this page's sizes directly; when a halogen-free sheath is required, move to the PUR family.

(N)SHTÖU-J SPREADER RFQ Checklist

  • Core count and cross-section (for example 44G2.5 or 56G2.5) plus any fibre, bus or screened pairs.
  • Spreader drum type (monospiral or cylindrical) or basket collector, and drum diameter.
  • Lift height, free-hanging length and hoisting speed (up to 240 m/min).
  • Spreader rotation range and expected torsion, plus landing shock conditions.
  • Lowest ambient temperature during reeling (down to -35 °C) and outdoor UV exposure.
  • Cut length per drum and quantity (MOQ 50 m; lead time 7 to 45 working days).

Related selection resources

(N)SHTÖU-J SPREADER Cable FAQ

What tensile load can (N)SHTÖU-J SPREADER carry?

15 N/mm² static and 30 N/mm² dynamic per copper cross-section, for example about 1,650 N static and 3,300 N dynamic on a 44G2.5 cable.

How much torsion does (N)SHTOEU-J SPREADER accept?

Up to ±50 °/m, because the synthetic-thread braid vulcanized between the two 5GM5 sheaths carries the torsional load.

Is there a basket version of (N)SHTÖU-J SPREADER?

Yes. The basket version is rated 300/500 V for gravity-fed spreader baskets with hoisting speeds up to 160 m/min, while the drum version is rated 0.6/1 kV for 240 m/min.

What is the outer diameter of (N)SHTÖU-J SPREADER 44G2.5?

36 to 40 mm nominal, with an approximate weight of 2,290 kg/km and a minimum reeling bend radius of about 240 mm.

Is (N)SHTÖU-J SPREADER cable supplied with a yellow sheath?

Yes. The 5GM5 outer sheath is yellow by default so the moving spreader cable is easy to see on the quay; other sheath colours can be quoted on request.

Specifications

(N)SHTÖU-J SPREADER Technical Data and Size Schedule

(N)SHTÖU-J SPREADER Key Tensile, Torsion and Speed Data

  • 30 N/mm² dynamic tensile: 15 N/mm² static and 30 N/mm² dynamic conductor tensile rating for long vertical spreader drops
  • Vulcanized anti-torsion braid: Synthetic-thread braid bonded between inner and outer 5GM5 sheaths holds ±50 °/m torsion
  • High multi-core counts: 36G1.5 to 56G2.5 control cores for headblock, twistlock, flipper and sensor circuits
  • Cold reeling to -35 °C: Reeling operation from -35 °C to +80 °C; -50 °C fixed installation
  • Project supply: MOQ 50 m with 7 to 45 working days manufacturing lead time
(N)SHTÖU-J SPREADER 0.6/1 kV DIN VDE 0250-814 Vertical Drum and Basket Spreader Reeling Cable technical data
ParameterValue
Rated voltage0.6/1 kV U0/U, maximum 0.7/1.2 kV AC and 0.9/1.8 kV DC, test 3.5 kV
Tensile and torsion rating15 N/mm2 static and 30 N/mm2 dynamic tensile load; torsion up to 50 degrees per metre
Reeling speedUp to 240 m/min on vertical monospiral or cylindrical spreader drums
ConstructionClass 5 copper, HEPR cores, 5GM5 inner sheath, vulcanized synthetic braid, yellow 5GM5 outer sheath
Supply termsMOQ 50 m with 7 to 45 working days manufacturing lead time
Bending radius4 x D fixed, 6 x D reeling, 7.5 x D on pulleys, 20 x D between S-type direction changes
Temperature range-50 °C to +80 °C fixed, -35 °C to +80 °C reeling, 90 °C conductor, 250 °C short circuit

(N)SHTÖU-J SPREADER size schedule

(N)SHTÖU-J SPREADER cable — nominal outer diameter, weight, tensile load and bending radius (0.6/1 kV)
Model and size (n x mm²)Nominal outer diameter min-max (mm)Approx. weight (kg/km)Max. tensile load static | dynamic (N)Min. reeling bend radius at 6 x OD (mm)Min. pulley bend radius at 7.5 x OD (mm)Next step
(N)SHTOEU-J SPREADER 36G1.529-321,255810 | 1,620192240Request this size
(N)SHTOEU-J SPREADER 44G1.532-351,535990 | 1,980210262Request this size
(N)SHTOEU-J SPREADER 25G2.529-321,360938 | 1,875192240Request this size
(N)SHTOEU-J SPREADER 30G2.532-351,6501,125 | 2,250210262Request this size
(N)SHTOEU-J SPREADER 36G2.532-351,7251,350 | 2,700210262Request this size
(N)SHTOEU-J SPREADER 42G2.536-402,2501,575 | 3,150240300Request this size
(N)SHTOEU-J SPREADER 44G2.536-402,2901,650 | 3,300240300Request this size
(N)SHTOEU-J SPREADER 56G2.543-462,8852,100 | 4,200276345Request this size

(N)SHTÖU-J SPREADER drum and basket versions

(N)SHTÖU-J SPREADER drum version vs basket version
VersionRated voltageMax. hoisting or reeling speedCollector type
(N)SHTÖU-J SPREADER0.6/1 kV240 m/min (typical STS hoisting up to 180 m/min)Motorized vertical monospiral or cylindrical drum
(N)SHTÖU-J BASKET SPREADER300/500 V160 m/minGravity-fed spreader basket collector

Tensile values are calculated from 15 N/mm² (static) and 30 N/mm² (dynamic) multiplied by the total copper cross-section; check that the free-hanging weight over the full lift height plus landing shock stays below these limits.

Outer diameters and weights are nominal reference values; bend radii use the upper diameter limit. A project datasheet is issued with each quotation.

Optical fibre elements, screened pairs or bus pairs can be integrated for spreader cameras and twistlock sensors on request.

Minimum order quantity is 50 m and manufacturing lead time is 7 to 45 working days.

ASCII part references: (N)SHTOEU-J SPREADER 44G2.5; NSHTOEU-J Spreader 36G2.5; (N)SHTOU-J spreader cable 56G2.5; NSHTOU-J Basket Spreader; DIN VDE 0250-814 spreader cable.

Standards

(N)SHTÖU-J SPREADER Standards and Test References

(N)SHTÖU-J SPREADER 0.6/1 kV DIN VDE 0250-814 Vertical Drum and Basket Spreader Reeling Cable standards and test references
Standard or specificationApplication
DIN VDE 0250-814 (reference construction)Heavy-duty rubber reeling cable design basis for the (N)SHTÖU-J type.
DIN VDE 0298-3 / 0298-4Bending radius, tensile load, reeling de-rating and current-carrying capacity (table 15).
DIN VDE 0207-215GM5 extra-heavy-duty rubber sheath compound.
IEC 60502-1 / IEC 60228HEPR insulation and class 5 flexible copper conductors.
IEC 60332-1-2 / IEC 60811-404Flame propagation and oil resistance of the sheath.

Certifications and document support

TEBAOFLEX ISO quality assurance and routine factory test reports

DIN Media — DIN VDE 0250 / 0298 / 0207 standards reference

Compare by duty

Related cable options

Compare these cable options by service combination, movement, load, voltage and transmission requirement.

Engineering-led quotation

Request a cable recommendation and quotation

Send the required services, cable length, mechanical duty, environment, termination and quantity. Our team will review the application before quoting.

  • Include the product name or SKU plus the required cable length and quantity.
  • Attach a specification, drawing or data sheet when available.

    MOQ 50 m · Engineering reply within 24 hours

    By submitting this form, you agree that TEBAOFLEX may use the contact information and files provided to review and respond to your enquiry. Files are used for quotation and engineering communication related to your request. See our Privacy Policy for current data handling and retention information.

    Email or WhatsApp is enough. Please include the key cable or application details for review.