E-mail: sales@tebaoflexcablegroup.com Whatsapp: +86 15639927303

(N)SHOEU 0.6/1kV Mining Rubber Flexible Cable
(N)SHOEU is a 0.6/1 kV rubber-sheathed flexible cable for mining, tunneling, conveyor systems, material-handling equipment, winding drum cars and submersible pump connections. It uses Class 5 bare copper conductors, EPR-based insulation and a yellow 5GM5 chlorinated-rubber outer sheath for demanding industrial and underground service.
- Rated voltage: 0.6/1 kV, with 3.5 kV AC test voltage for main cores
- Conductor: Bare electrolytic copper, finely stranded Class 5
- Insulation: EPR special compound, better than 3GI3 material class
- Outer sheath: Yellow 5GM5 chlorinated-rubber special compound
- Installation depth: Suitable for submersible pump connection up to 500 m maximum depth
- Mechanical limits: 15 N/mm² maximum tensile load on conductor and ±100°/m torsional stress
- Travel speed: Up to 60 m/min when used on a winding drum car
- Resistance profile: Flame performance to IEC 60332-1-2, oil resistance to IEC 60811-404 and water resistance to EN 50525-2-21
(N)SHOEU Cable for Mining, Tunneling and Pump Connections
(N)SHOEU is a 0.6/1 kV rubber-sheathed flexible power cable for mining and tunneling applications where the cable may be laid along conveyors, connected to shiftable machinery, installed on material-handling equipment, or used between upper and lower cars. It is also specified for cable suspension fittings and for submersible pump connections up to a maximum depth of 500 m.
The cable combines Class 5 finely stranded bare copper conductors, EPR-based insulation, an EPR inner sheath and a yellow 5GM5 chlorinated-rubber outer sheath. This construction gives procurement teams a defined low-voltage mining cable for indoor and outdoor routes, including wet and mechanically demanding industrial environments.
For engineering selection, (N)SHOEU should not be treated as a generic building wire or a universal high-cycle reeling cable. The project should check tensile load, torsion, bending radius according to DIN VDE 0298-3, travel speed, water depth, ambient temperature and whether an -O or -J core identification is required.
Key Engineering Features
- Mining-focused rubber construction: EPR insulation and a 5GM5 yellow rubber sheath are selected for mobile and harsh industrial routes rather than fixed indoor distribution only.
- Class 5 bare copper conductor: Finely stranded copper improves flexibility for handling, machine connection and cable suspension compared with rigid conductors.
- Wet-duty capability: The supplied data states suitability for submersible pump connections and water resistance according to EN 50525-2-21, with maximum water depth limited to 500 m.
- Outdoor and chemical resistance: The cable is listed for unrestricted indoor/outdoor use and resistance to ozone, moisture and oil exposure according to the stated test references.
- Defined motion limits: Maximum torsional stress is ±100°/m, maximum tensile load on the conductor is 15 N/mm², and winding drum car speed is limited to 60 m/min.
- Optional screen note: For KON concentric-screen versions only, a closed layer of copper wires may be spun over the core assembly. Do not specify this screen unless the required version is confirmed.
- Clear core identification: Standard core insulation is light grey with black digits. -J versions include a green/yellow protective conductor; -O versions are without green/yellow conductor.
Technical Specifications
| Product Type | 0.6/1 kV mining rubber flexible cable |
| Model | (N)SHOEU / (N)SHÖU equivalent search variant |
| Rated Voltage | 0.6/1 kV (600/1000 V) |
| Maximum AC Operating Voltage | 0.7/1.2 kV |
| Maximum DC Operating Voltage | 0.9/1.8 kV |
| AC Test Voltage, Main Cores | 3.5 kV, 5 minutes |
| AC Test Voltage, Control Cores | 2 kV |
| Maximum Conductor Temperature | 90°C |
| Maximum Short-Circuit Temperature | 250°C |
| Maximum Water Temperature | 40°C; higher water temperatures may shorten cable service life |
| Fixed Ambient Temperature | -40°C to +80°C |
| Fully Flexible Ambient Temperature | -25°C to +60°C |
| Maximum Water Depth | 500 m |
| Minimum Bending Radius | According to DIN VDE 0298-3 |
| Maximum Tensile Load on Conductor | 15 N/mm² |
| Torsional Stress | ±100°/m |
| Travel Speed on Winding Drum Car | 60 m/min maximum |
| Outer Sheath Colour | Yellow |
Cable Construction
- Conductor: Bare electrolytic copper, finely stranded Class 5.
- Insulation: EPR-based special compound, material performance better than 3GI3.
- Core identification: Light grey cores with black digits; -J versions include green/yellow protective conductor.
- Optional screen: For KON concentric-screen versions only, closed copper-wire spinning may be applied over the core assembly.
- Inner sheath: EPR-based special compound.
- Outer sheath: Yellow chlorinated-rubber special compound, 5GM5 type.
Standards and Compliance
| Construction Standard | Based on DIN VDE 0250 Part 812 |
| Installation Reference | DIN VDE 0298-3 |
| Factory Surveillance | VDE certificate with factory surveillance stated in source data |
| Flame Performance | IEC 60332-1-2 |
| Oil Resistance | IEC 60811-404 |
| Weather Resistance | Unrestricted indoor and outdoor use; resistant to ozone and moisture |
| Water Resistance | EN 50525-2-21 |
Application in explosion-hazard areas is mentioned in the supplied data, but project approval still depends on the complete installation, equipment protection concept and local rules. Do not treat the cable description alone as Ex certification for a complete system.
Dimensions and Electrical Data
The following values support cable entry, drum, suspension, pulling and current-rating checks. Current-carrying capacity and short-circuit current must still be verified against installation method, ambient temperature, grouping and project standards.
| Type | Part No. | Size | Conductor Dia. Max. (mm) | OD Min.-Max. (mm) | Weight (kg/km) | Tensile Force Max. (N) | DC Resistance 20°C (Ω/km) | Capacitance (µF/km) | Inductance (mH/km) | Current (A) | Short-Circuit Current (kA) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| (N)SHOEU-O | 20265363 | 1 × 16 | 5.2 | 9.5-11.1 | 230 | 240 | 1.21 | 0.44 | 0.26 | 99 | 2.29 |
| (N)SHOEU-O | 20265364 | 1 × 25 | 6.4 | 11.0-12.6 | 335 | 375 | 0.78 | 0.45 | 0.26 | 131 | 3.58 |
| (N)SHOEU-O | 20265365 | 1 × 35 | 7.5 | 12.3-13.9 | 435 | 525 | 0.554 | 0.52 | 0.25 | 162 | 5.01 |
| (N)SHOEU-O | 20265366 | 1 × 50 | 9.0 | 14.5-16.5 | 615 | 750 | 0.386 | 0.54 | 0.25 | 202 | 7.15 |
| (N)SHOEU-O | 20265367 | 1 × 70 | 11.1 | 16.4-18.4 | 830 | 1050 | 0.272 | 0.61 | 0.24 | 250 | 10.01 |
| (N)SHOEU-O | 20265369 | 1 × 95 | 12.8 | 18.5-20.5 | 1060 | 1425 | 0.206 | 0.64 | 0.24 | 301 | 13.59 |
| (N)SHOEU-O | 20265370 | 1 × 120 | 14.5 | 20.4-22.4 | 1300 | 1800 | 0.161 | 0.72 | 0.23 | 352 | 17.16 |
| (N)SHOEU-O | 20265372 | 1 × 150 | 16.5 | 22.8-24.8 | 1600 | 2250 | 0.129 | 0.72 | 0.23 | 404 | 21.45 |
| (N)SHOEU-O | 20265373 | 1 × 185 | 17.9 | 24.7-27.7 | 2020 | 2775 | 0.106 | 0.71 | 0.23 | 461 | 26.46 |
| (N)SHOEU-O | 20265374 | 1 × 240 | 21.2 | 27.6-30.6 | 2548 | 3600 | 0.08 | 0.76 | 0.23 | 540 | 34.32 |
| (N)SHOEU-O | 20265377 | 1 × 300 | 23.6 | 31.6-34.6 | 3200 | 4500 | 0.0641 | 0.78 | 0.23 | 620 | 42.9 |
| (N)SHOEU-O | 20265378 | 2 × 1.5 | 1.6 | 9.8-11.4 | 150 | 45 | 13.3 | 0.21 | 0.33 | 23 | 0.18 |
| (N)SHOEU-O | 20265379 | 2 × 2.5 | 2.0 | 10.7-12.3 | 185 | 75 | 7.98 | 0.24 | 0.32 | 30 | 0.31 |
| (N)SHOEU-O | 2 × 4 | 2.4 | 11.9-13.5 | 220 | 120 | 4.95 | 0.27 | 0.30 | 41 | 0.57 | |
| (N)SHOEU-O | 20265395 | 3 × 2.5 | 2.0 | 11.1-12.7 | 210 | 113 | 7.98 | 0.24 | 0.32 | 30 | 0.31 |
| (N)SHOEU-O | 20265396 | 3 × 4 | 2.4 | 12.1-13.7 | 271 | 180 | 4.95 | 0.27 | 0.30 | 41 | 0.57 |
| (N)SHOEU-O | 20265397 | 3 × 6 | 2.9 | 13.2-14.8 | 350 | 270 | 3.3 | 0.32 | 0.29 | 53 | 0.86 |
| (N)SHOEU-O | 20265398 | 3 × 10 | 3.9 | 16.1-18.1 | 505 | 450 | 1.91 | 0.34 | 0.28 | 74 | 1.43 |
| (N)SHOEU-O | 20265399 | 3 × 16 | 5.2 | 19.0-21.0 | 775 | 720 | 1.21 | 0.44 | 0.26 | 99 | 2.29 |
| (N)SHOEU-O | 20265400 | 3 × 25 | 6.4 | 22.9-24.9 | 1160 | 1125 | 0.78 | 0.45 | 0.26 | 131 | 3.58 |
| (N)SHOEU-O | 20265401 | 3 × 35 | 7.5 | 24.9-27.9 | 1550 | 1575 | 0.554 | 0.52 | 0.25 | 162 | 5.01 |
| (N)SHOEU-O | 20265402 | 3 × 50 | 9.0 | 29.4-32.4 | 2180 | 2250 | 0.386 | 0.54 | 0.25 | 202 | 7.15 |
| (N)SHOEU-O | 20265403 | 3 × 70 | 11.1 | 34.8-37.8 | 3020 | 3150 | 0.272 | 0.61 | 0.24 | 250 | 10.01 |
| (N)SHOEU-O | 20265405 | 3 × 95 | 12.8 | 40.9-43.9 | 3810 | 4275 | 0.206 | 0.64 | 0.24 | 301 | 13.59 |
| (N)SHOEU-O | 20265406 | 3 × 120 | 14.4 | 44.7-47.7 | 4970 | 5400 | 0.161 | 0.72 | 0.23 | 352 | 17.16 |
| (N)SHOEU-O | 20265407 | 3 × 150 | 16.1 | 50.0-54.0 | 6290 | 6750 | 0.129 | 0.72 | 0.23 | 404 | 21.45 |
| (N)SHOEU-O | 20265408 | 3 × 185 | 17.9 | 54.6-58.6 | 7470 | 8325 | 0.106 | 0.95 | 0.22 | 461 | 26.46 |
| (N)SHOEU-J | 20265409 | 3 × 1.5 | 1.6 | 10.2-11.8 | 170 | 68 | 13.3 | 0.21 | 0.33 | 23 | 0.18 |
| (N)SHOEU-J | 20265410 | 3 × 2.5 | 2.0 | 11.1-12.7 | 220 | 113 | 7.98 | 0.24 | 0.32 | 30 | 0.31 |
| (N)SHOEU-J | 20265411 | 3 × 4 | 2.4 | 12.1-13.7 | 290 | 180 | 4.95 | 0.27 | 0.31 | 41 | 0.57 |
| (N)SHOEU-J | 20265412 | 3 × 6 | 2.9 | 13.2-14.8 | 360 | 270 | 3.3 | 0.32 | 0.29 | 53 | 0.86 |
| (N)SHOEU-J | 20265413 | 4 × 1.5 | 1.6 | 11.0-12.6 | 204 | 90 | 13.3 | 0.21 | 0.33 | 23 | 0.18 |
| (N)SHOEU-J | 20265414 | 4 × 2.5 | 2.0 | 12.0-13.6 | 270 | 150 | 7.98 | 0.24 | 0.32 | 30 | 0.31 |
| (N)SHOEU-J | 20265415 | 4 × 4 | 2.4 | 13.0-14.6 | 338 | 240 | 4.95 | 0.27 | 0.30 | 41 | 0.57 |
| (N)SHOEU-J | 20265416 | 4 × 6 | 2.9 | 14.9-16.9 | 450 | 360 | 3.3 | 0.32 | 0.29 | 53 | 0.86 |
| (N)SHOEU-J | 20265417 | 4 × 10 | 3.9 | 17.4-19.4 | 690 | 600 | 1.91 | 0.34 | 0.28 | 74 | 1.43 |
| (N)SHOEU-J | 20265418 | 4 × 16 | 5.2 | 21.0-23.0 | 980 | 960 | 1.21 | 0.44 | 0.26 | 99 | 2.29 |
| (N)SHOEU-J | 20265419 | 4 × 25 | 6.4 | 24.5-27.5 | 1490 | 1500 | 0.78 | 0.45 | 0.26 | 131 | 3.58 |
| (N)SHOEU-J | 20265420 | 4 × 35 | 7.5 | 28.4-31.4 | 1870 | 2100 | 0.554 | 0.52 | 0.25 | 162 | 5.01 |
FAQ
What is (N)SHOEU cable used for?
(N)SHOEU is used for mining and tunneling equipment, conveyor routes, cable suspension fittings, winding drum cars, material-handling equipment and submersible pump connections.
What voltage rating does (N)SHOEU have?
The rated voltage is 0.6/1 kV, with maximum permissible operating voltage of 0.7/1.2 kV AC and 0.9/1.8 kV DC.
Can (N)SHOEU be used underwater?
The supplied data states suitability for submersible pump connections with a maximum depth of 500 m. Water temperature and termination sealing must be checked for the actual installation.
What is the difference between (N)SHOEU-O and (N)SHOEU-J?
-O versions are normally without a green/yellow protective conductor, while -J versions include a green/yellow protective conductor. Confirm the required core arrangement before ordering.
Does every (N)SHOEU cable include a copper-wire screen?
No. The concentric copper-wire screen is stated for KON screened versions only. Specify the screened construction separately when required.
Is (N)SHOEU suitable for winding drum cars?
Yes, within the stated limits. The supplied data gives a maximum winding drum car speed of 60 m/min, with bending radius according to DIN VDE 0298-3 and tensile load limited to 15 N/mm² on the conductor.
| Product Type | Mining rubber flexible cable |
|---|---|
| Model | (N)SHOEU |
| Search Variant | (N)SHÖU / NSHOEU |
| Voltage Rating | 0.6/1 kV |
| Maximum AC Voltage | 0.7/1.2 kV |
| Maximum DC Voltage | 0.9/1.8 kV |
| AC Test Voltage | Main cores 3.5 kV; control cores 2 kV |
| Conductor | Bare electrolytic copper, finely stranded Class 5 |
| Insulation | EPR special compound, better than 3GI3 |
| Core Identification | Light grey with black digits; -J with green/yellow protective conductor |
| Optional Screen | KON versions only: concentric closed copper-wire layer |
| Inner Sheath | EPR special compound |
| Outer Sheath | 5GM5 chlorinated-rubber special compound |
| Sheath Colour | Yellow |
| Fixed Temperature | -40°C to +80°C |
| Fully Flexible Temperature | -25°C to +60°C |
| Maximum Conductor Temperature | 90°C |
| Short-Circuit Temperature | 250°C maximum |
| Maximum Water Temperature | 40°C |
| Maximum Water Depth | 500 m |
| Bending Radius | According to DIN VDE 0298-3 |
| Maximum Tensile Load | 15 N/mm² on conductor |
| Torsional Stress | ±100°/m |
| Travel Speed | Winding drum car up to 60 m/min |
| Flame Performance | IEC 60332-1-2 |
| Oil Resistance | IEC 60811-404 |
| Water Resistance | EN 50525-2-21 |
| Standard | Based on DIN VDE 0250 Part 812 |
| Application | Mining, tunneling, conveyors, material handling, winding drum cars and submersible pumps |
