UL 10485 Thin PFA Wire, 250°C 600V
UL 10485 is a UL-certified PFA equipment wire rated 250°C and 600 V AC. This page covers small-gauge single-conductor constructions for internal appliance and electronic wiring, including separate solid and stranded 28 AWG options.
- Voltage: 600 V AC
- Temperature: 250°C
- Insulation / covering: extruded PFA
- Size selection: 30–20 AWG in dimension table
- Certification: UL-certified AWM; UL 758
UL 10485 wire selection
UL 10485 is a UL-certified PFA equipment wire rated 250°C and 600 V AC. This page covers small-gauge single-conductor constructions for internal appliance and electronic wiring, including separate solid and stranded 28 AWG options.
The dimension table runs from 30 AWG to 20 AWG with a nominal 0.20 mm PFA wall and a 0.15 mm minimum wall. Finished diameters, conductor construction and resistance at 20°C appear together so a buyer can check both electrical sizing and assembly fit. The conductor construction matters even where two catalogue rows show the same nominal finished diameter: a solid wire and a stranded wire require different handling and termination checks.
For a compact 600 V harness, start with the required conductor size and then review the available terminal opening and strip length. Include the conductor finish in the specification when the lead will operate close to 250°C. A temperature rating on the insulation cannot compensate for a terminal or adjacent component selected for a lower temperature.
See the Specifications tab for the model and size tables. Browse the high-temperature cable range for related constructions. Compare the larger-gauge UL 10503 and the PFA wire family.
Construction
UL 10485 uses the following conductor and insulation system. The diagram illustrates the layer sequence; select the conductor construction and covering shown in the required size specification.
| Component | Construction detail |
|---|---|
| Conductor | Copper; bare or plated construction selected for the temperature and termination |
| Insulation | Extruded PFA |
| Construction | Single insulated conductor |
Applications
UL 10485 is used for internal wiring of appliances or electronic equipment where the specified PFA construction, conductor size and temperature rating match the circuit.
UL 10485 replacement selection
For replacement enquiries, include the existing wire marking and the equipment connection drawing so the conductor, insulation and terminal arrangement can be matched.
Specifications
| Parameter | Specification |
|---|---|
| UL style | UL 10485 |
| Voltage rating | 600 V AC |
| Temperature rating | 250°C |
| Insulation / covering | extruded PFA |
| Conductor size coverage | 30–20 AWG in dimension table |
| Resistance reference temperature | 20°C |
| Dimensional units | mm |
| Strand-diameter tolerance in table | ±0.005 mm |
| Nominal / minimum PFA wall | 0.20 / 0.15 mm |
Dimensions and resistance are nominal catalogue values for the listed constructions. Solid and stranded versions must be specified separately. Use the agreed drawing for termination tolerances.
| Model and conductor size | Stranding (No./mm) | Conductor dia. (mm) | Nominal wall (mm) | Minimum wall (mm) | Nominal OD / tolerance (mm) | Conductor resistance at 20°C (Ω/km) |
|---|---|---|---|---|---|---|
| UL 10485 20 AWG | 7/0.3 | 0.92 | 0.20 | 0.15 | 1.36 ±0.10 | 36.70 |
| UL 10485 22 AWG | 19/0.15 | 0.76 | 0.20 | 0.15 | 1.15 ±0.10 | 59.40 |
| UL 10485 24 AWG | 7/0.20 | 0.61 | 0.20 | 0.15 | 1.00 ±0.10 | 94.20 |
| UL 10485 26 AWG | 7/0.16 | 0.49 | 0.20 | 0.15 | 0.88 ±0.10 | 150.00 |
| UL 10485 28 AWG solid | 1/0.32 | 0.32 | 0.20 | 0.15 | 0.72 ±0.10 | 227.00 |
| UL 10485 28 AWG stranded | 7/0.127 | 0.39 | 0.20 | 0.15 | 0.72 ±0.10 | 227.00 |
| UL 10485 30 AWG | 1/0.254 | 0.254 | 0.20 | 0.15 | 0.66 ±0.10 | 361.00 |
Selecting the specified construction
State UL 10485, AWG and solid or stranded construction on the enquiry. Check the conductor finish, finished diameter and strip dimensions before substituting another PFA style.
For tight-clearance connections, use the agreed finished-diameter drawing: nominal conductor diameter and nominal wall values in the table do not always sum exactly to the listed outside diameter.
Standards
TEBAOFLEX UL 10485 wire is UL-certified appliance wiring material.
| Item | Requirement or reference |
|---|---|
| Certification | UL-certified AWM |
| Style designation | UL 10485 |
| Construction standard | UL 758 — Appliance Wiring Material |
| Style flame classification | Horizontal flame |
Identify the UL style, conductor size, voltage and temperature grade on the purchasing specification. Include the required product identification and certification documents with the enquiry.
Request a cable recommendation and quotation
Send the required services, cable length, mechanical duty, environment, termination and quantity. Our team will review the application before quoting.
- Include the product name or SKU plus the required cable length and quantity.
- Attach a specification, drawing or data sheet when available.