


TF-RT Work-Class ROV TMS Excursion Tether & Subsea Intervention Cable (RT0084–RT0173 & 45XM301 Series)
TF-RT (TF-RT-TETHER) is a heavy-duty synthetic-fibre-reinforced dynamic excursion tether cable linking subsea Tether Management Systems (TMS cages or top-hats) to work-class intervention ROVs, high-power subsea hull-cleaning vehicles and 1,500 m sonar sleds. Covering cross-references RT0084, RT0106, RT0127, RT0133, RT0136, RT0137, RT0168, RT0171, RT0173 and 45XM301 across Ø 24.5–41.3 mm with 25–150 kN minimum breaking load.
TF-RT work-class ROV TMS excursion tether cables bridge the dynamic subsea span between a suspended steel-armoured Tether Management System (bale-arm top-hat or garage cage) and the free-swimming work-class ROV or heavy subsea cleaning/intervention skid across Ø 24.5 mm to Ø 41.3 mm diameters, 1.0–3.3 kV operating voltages and 25 kN to 150 kN minimum breaking loads.
Unlike steel-wire-armoured ROV main-lift umbilicals (which carry 185–880 kN vertical crane loads from the vessel winch down to the TMS), a TMS excursion tether spools horizontally in and out through pinch-wheel traction drives and tight 200–400 mm bellmouth sheaves while floating neutrally or slightly negatively (-20 to +285 kg/km in seawater) at working depth. TF-RT combines torque-balanced contra-helical liquid-crystal-polymer (LCP) or aramid strength layers, syntactic/cellular buoyancy jackets, laser-welded stainless-steel FIST optical tubes, and cut-resistant yellow or black subsea polyurethane outer sheaths.
Specify exact replacements for industry-standard excursion tether designations RT0127 (24.5 mm buoyant), RT0133 / RT0137 / RT0173 (27.0 mm), RT0084 / RT0168 (28.0 mm), RT0106 / RT0136 / RT0171 (35.0 mm, 130–135 kN), 45XM301 (41.3 mm sonar/coax/FIST work-class hybrid), or 3.0–3.3 kV HPU excursion builds. Supplied as continuous bulk cable with heat-shrink water-blocking end caps from 50 m MOQ in 7 to 45 working days.
Explore the marine, offshore and shipboard cable range for related configurations.
TF-RT Work-Class ROV TMS Excursion Tether Construction
Engineered for cyclic bend-over-sheave (CBOS) TMS traction drives with thin-wall medium-voltage power cores, hermetically sealed FIST optical tubes and torque-balanced synthetic armour.

| Component | Material and construction |
|---|---|
| 1. Thin-Wall 1.0 kV – 3.3 kV Power & Instrumentation Conductors | Flexible bare or tinned copper conductors (0.22 mm² to 16 mm²) with concentric dual-extruded thin-wall XLPE, crosslinked HDPE or polypropylene insulation optimized for compact TMS drum spooling. |
| 2. Fibre-in-Steel-Tube (FIST / FIMT) Optical & Optional Sonar Coax Units | Laser-welded 316L stainless-steel buffer tube filled with thixotropic hydrogen-scavenging gel housing 2 to 12 SM (G.652.D / G.657.A2) and MM (50/125) fibers; optional 50/75-ohm side-scan sonar coax on 45XM301. |
| 3. Longitudinal Water-Blocking & Inner Bedding Sheath | Void-free silicone or elastomeric water-blocking compound and swelling tapes preventing axial water migration under 150–300 bar hydrostatic pressure. |
| 4. Dedicated Syntactic Buoyancy Layer & Contra-Helical LCP / Aramid Armour | Depth-rated syntactic microspheres or closed-cell foam paired with opposing-lay liquid-crystal-polymer (LCP) or aramid fiber layers delivering 25 kN to 150 kN non-rotating tensile strength. |
| 5. TMS Traction-Drive Polyurethane / Polyester Elastomer Outer Sheath | High-durometer hydrolysis- and abrasion-resistant subsea PUR (or UV-stabilized TPEE on 45XM301) engineered to grip TMS pinch wheels without jacket delamination. |
TF-RT & RT0084–RT0173 / 45XM301 Reference Breakdown
- TF-RT RT0127 .. RT0173: Direct work-class TMS excursion tether equivalents spanning Ø 24.5 mm (25 kN buoyant) to Ø 35.0 mm (135 kN heavy HPU)
- TF-RT 45XM301: Ø 41.3 mm, 1,500 m depth, 100 kN work-class ROV instrumentation hybrid integrating SM FIST fibers, side-scan sonar coax and power
- FIST / FIMT: Fibre-in-Steel-Tube: hermetically laser-welded 316L stainless-steel tube protecting 2 to 12 SM/MM optical fibers against hydrostatic crush
- STQ / STP: Screened Twisted Quad (STQ) or Screened Twisted Pair (STP) 100–120 Ω telemetry elements for ROV MUX and sonar control
- TMS-3000V / 3300V: Thin-wall 3.0 kV and 3.3 kV medium-voltage three-phase excursion tethers for 100–250 hp work-class ROV hydraulic packs
TF-RT TMS Cages, Work-Class Intervention & Heavy Subsea Skids
Designed for garage and top-hat TMS excursion reels on work-class ROVs, heavy hull/offshore cleaning skids, trenching support vehicles and deep tow instrumentation.

- Work-class ROV garage and top-hat Tether Management System (TMS) dynamic excursion reels (150 m to 600 m typical payout).
- Heavy offshore jacket marine-growth removal, cavitation cleaning skids and FPSO mooring-chain inspection ROVs.
- Subsea tree/manifold intervention, BOP secondary hot-stab ROVs, pipeline touchdown monitoring and salvage vehicles.
- 1,500 m work-class ROV multi-sensor instrumentation, side-scan sonar and sub-bottom profiler hybrid links (45XM301 configuration).
TF-RT Excursion Tether vs Main Lift & Electro-Hydraulic Umbilicals
| Subsea Cable Type | Subsea Span & Armour | Breaking Load & Weight in Water | Primary Winch / Handling System |
|---|---|---|---|
| TF-RT Excursion Tether (this page) | TMS cage to work-class ROV (LCP/Aramid) | 25–150 kN; near-neutral (-20 to +285 kg/km) | Subsea TMS pinch-wheel & drum (200–400 mm bend) |
| RM-Series Main Lift Umbilical | Surface vessel A-frame to TMS (Contra-helical GSW) | 185–880 kN; heavy sinking (815–4,350 kg/km) | Topside traction / storage winch & A-frame heave sheave |
| TF-HULL Biofouling Tether | Pier/boat direct to hull-cleaning ROV (Aramid) | 5–70 kN; tuned harbor floating (-35 to 0 kg/km) | Deck reel or hand payout in 0.5–50 m port water |
| OMB Electro-Hydraulic Umbilical | Surface to subsea tool skid (LCP + hoses) | 30–100 kN; integrates 70–350 bar hoses | Large-drum hydraulic intervention reel (500–730 mm bend) |
Need the topside-to-TMS galvanized steel-armoured lift cable (RM0037, RM0049, RM0060, RM0066, RM0067, 185–880 kN)? Visit our dedicated Steel-Armoured ROV Main Lift Umbilical page.
TF-RT TMS Excursion Tether Engineering RFQ Checklist
- Target RT cross-reference (e.g., RT0106, RT0127, RT0168, RT0171, RT0173, 45XM301) or exact TMS drum groove diameter and maximum cable OD tolerance (e.g., 27.0 ± 0.8 mm).
- ROV HPU operating voltage (e.g., 1,000 V, 2,400 V, 3,000 V or 3,300 V AC/DC), phase current and acceptable voltage drop over excursion length.
- FIST optical fiber count (SM G.657.A2 + MM 50/125) and any screened twisted quads (STQ), pairs (STP) or 50/75-ohm sonar coaxial cores.
- Maximum operating water depth (e.g., 300 m, 1,000 m, 2,000 m or 3,000 m) and target submerged weight in seawater (kg/km).
- Continuous excursion length per drum (e.g., 200 m, 350 m, 600 m; supplied as bulk cable with heat-shrink end caps, MOQ 50 m in 7 to 45 working days).
Related selection resources
- Explore TEBAOFLEX Work-Class ROV, TMS & Subsea Umbilical Solutions
- Pair with RM-Series (RM0037–RM0067) Steel-Armoured ROV Main Lift Umbilicals
- Compare Heavy Seabed Trencher & Plough Subsea Umbilical Cables
- Compare TF-HULL Buoyant Hybrid Tether for Hull Biofouling Cleaning ROVs
- Engineering guide: ROV main-lift umbilical vs TMS tether vs deck jumper
- Engineering guide: TMS drum groove pitch & bellmouth sheave sizing
TF-RT Work-Class ROV TMS Excursion Tether Cable FAQ
What is the difference between a TF-RT ROV TMS excursion tether and an RM-series ROV main lift umbilical?
TF-RT uses lightweight non-metallic LCP or aramid fiber armour (25–150 kN MBL, -20 to +285 kg/km in seawater, 200–400 mm dynamic bend radius) so a work-class ROV can swim freely out of its subsea TMS cage, whereas RM-series main-lift umbilicals use heavy contra-helical steel wire armour (185–880 kN MBL) to hoist both the TMS and ROV from the vessel.
What is the true minimum breaking load of the Ø 27 mm RT0173 ROV tether cable?
110 kN (approx. 11.2 metric tons) is the correct textile-armoured minimum breaking load for the Ø 27.0 mm RT0173 configuration—correcting a known '1100 kN' decimal-missing typo in a legacy 1-page industry flyer.
How do TF-RT excursion tethers achieve tight 200–275 mm dynamic bend radii without crushing optical fibers?
1.8–2.4 mm laser-welded 316L stainless-steel FIST tubes placed near the neutral axis or laid at optimized helix angles isolate single-mode and multimode fibers from pinch-wheel radial compression and syntactic foam strain.
Can TF-RT tethers be manufactured for 3,000 V or 3,300 V work-class ROV hydraulic power units?
Yes — dual-extruded thin-wall medium-voltage XLPE/EPR insulation supports 3.0 kV and 3.3 kV three-phase HPU transmission inside Ø 27–38.5 mm tethers while maintaining TMS drum capacity.
How are TF-RT excursion tether cables packed and what is the MOQ and lead time?
50 m minimum order quantity (typically ordered in 150 m to 650 m continuous TMS drum lengths), shipped as bulk cable on wooden reels with heat-shrink water-blocking end caps in 7 to 45 working days.
TF-RT (RT0084–RT0173 & 45XM301) Excursion Tether Schedule
TF-RT Breaking Load (25–150 kN), FIST Optics & 50 m MOQ
- Complete RT0084–RT0173 coverage: Direct dimensional and electro-optical equivalents for Ø 24.5 mm, 27.0 mm, 28.0 mm and 35.0 mm TMS excursion tethers plus Ø 41.3 mm 45XM301 deepwater sonar hybrid
- High-cycle TMS drum & sheave life: Contra-helical LCP / aramid textile armour and thin-wall medium-voltage insulation survive thousands of cyclic bend-over-sheave (CBOS) excursions at 200–400 mm dynamic bend radius
- 1.0 kV to 3.3 kV thin-wall power: Dual-extruded thin-wall XLPE / EPR / PP power cores (2.0 mm² to 16 mm²) transmit 15–150 kW hydraulic HPU power from the TMS transformer to the ROV
- Laser-welded FIST stainless optical units: Hermetically sealed Fibre-in-Steel-Tube (FIST / FIMT) assemblies carrying 2 to 12 single-mode and multimode fibers resist hydrostatic crush down to 1,500–3,000 m
- Continuous bulk drum, MOQ 50 m: Delivered in continuous excursion lengths (150 m, 300 m, 600 m or custom, MOQ 50 m) on wooden reels with heat-shrink water-blocking end caps in 7 to 45 working days
| Parameter | Value |
|---|---|
| Rated voltage | 1.0 kV to 3.3 kV AC / DC ROV HPU power cores; 250 V to 600 V control quads, pairs and sonar coax |
| Finished diameter range | 24.5 mm to 35.0 mm across RT0084 to RT0173 TMS tethers; up to 41.3 mm on 45XM301 and 3.3 kV heavy work-class builds |
| Minimum breaking load | 25 kN (light buoyant RT0127) and 70 to 135 kN across standard 27 to 35 mm RT tethers; up to 150 kN on heavy 3.3 kV TMS tethers |
| Seawater weight and bend radius | -20 kg/km (buoyant) to +285 kg/km controlled submerged trim; 200 mm to 400 mm minimum dynamic bending radius over TMS sheaves |
| Supply form and MOQ | Continuous bulk cable on wooden drums with heat-shrink water-blocking end caps (TMS socket/potting by client); MOQ 50 m in 7 to 45 working days |
| Optical fiber package | 1 or 2 stainless-steel FIST units containing 2 SM, 4 SM, 6 SM, 8 SM, 6 SM + 6 MM, or 8 SM + 4 MM fibers |
| Depth and temperature rating | -30 °C to +80 °C; standard syntactic flotation rated to 500–1,000 m or 1,500–3,000 m deepwater work-class service |
TF-RT (RT0084–RT0173) Work-Class TMS Excursion Tether Schedule
| Model & RT Reference | Power & Signal Conductors | FIST Optical Fiber Unit | Nom. OD (mm) | Air / Seawater Wt (kg/km) | Min. Dyn. Bend Radius (mm) | Min. Breaking Load (kN) | Next step |
|---|---|---|---|---|---|---|---|
| TF-RT RT0127 | 2 × 2.0 mm² + 2 × 0.5 mm² | 1 × 2 SM FIST (Buoyant layer) | 24.5 | 450 / -20 (Buoyant) | 240 | 25 | Request this size |
| TF-RT RT0137 | 2 × 0.88 mm² + 2 × 0.22 mm² | 1 × 4 SM FIST | 27.0 | 760 / 170 | 300 | 80 | Request this size |
| TF-RT RT0133 | 6 × 4.0 mm² + 3 × 0.34 mm² | 1 × 8 SM FIST | 27.0 | 850 / 265 | 400 | 100 | Request this size |
| TF-RT RT0173 | 3 × 6.0 + 2 × 2.5 + 1 × 0.5 mm² | 1 × 6 SM FIST | 27.0 | 860 / 270 | 200 | 110 | Request this size |
| TF-RT RT0084 | 3 × 4.0 mm² + 2 × 0.88 mm² | 1 × 6 SM FIST | 28.0 | 665 / 39 | 250 | 70 | Request this size |
| TF-RT RT0168 | 6 × 4.0 + 2 × 1.0 + 4 × 0.6 mm² | 1 × 8 SM + 4 MM FIST | 28.0 | 915 / 285 | 400 | 100 | Request this size |
| TF-RT RT0106 | 3 × 6.0 + 2 × 2.5 + 4 × 0.5 mm² | 1 × 6 SM + 6 MM FIST | 35.0 | 1,200 / 210 | 275 | 130 | Request this size |
| TF-RT RT0136 | 3 × 6.0 + 2 × 2.5 mm² + 1 × 0.5 STQ | 1 × 6 SM + 6 MM FIST (Buoyant) | 35.0 | 1,200 / 205 | 400 | 130 | Request this size |
| TF-RT RT0171 | 3 × 6.0 mm² + 2 × 2.5 mm² | 1 × 6 SM + 6 MM FIST | 35.0 | 1,105 / 120 | 200 | 135 | Request this size |
TF-RT (45XM301 & 3.3 kV) Deepwater Sonar & HPU Tether Schedule
| Model & Configuration | HV Power & Coax / Signal Elements | Optical Fiber Package | Nom. OD (mm) | Max Depth Rating | Min. Dyn. Bend Radius (mm) | Min. Breaking Load (kN) | Next step |
|---|---|---|---|---|---|---|---|
| TF-RT 45XM301 | Bare Cu power/comm + Side-scan sonar coax | SM fibers in stainless tube | 41.3 | 1,500 m | 415 | 100 (10,000 daN) | Request this size |
| TF-RT TMS-3000V-32 | 3 × 10 mm² (3.0 kV) + 2 × 2 × 0.75 mm² | 1 × 12 SM G.657.A2 FIST | 32.0 | 2,000 m | 320 | 120 | Request this size |
| TF-RT TMS-3300V-38 | 3 × 16 mm² (3.3 kV) + 3 × 2 × 0.75 mm² | 2 × 6 SM/MM FIST | 38.5 | 3,000 m | 385 | 150 | Request this size |
Engineering verification note on RT0173 breaking load: one widely circulated legacy 1-page flyer misprints the Ø 27 mm RT0173 textile tether breaking load as '1100 kN' (a 10× typographical error exceeding Ø 40 mm steel-armoured main-lift cables); the physically verified textile-braid rating for Ø 27 mm 3×6+2×2.5 mm² construction is 110 kN (consistent with Ø 28 mm RT0168 at 100 kN and Ø 35 mm RT0171 at 135 kN).
ASCII part references for BOM and ERP entry: TF-RT-RT0084, TF-RT-RT0106, TF-RT-RT0127, TF-RT-RT0133, TF-RT-RT0136, TF-RT-RT0137, TF-RT-RT0168, TF-RT-RT0171, TF-RT-RT0173, TF-RT-45XM301, TF-RT-TMS-3000V-32, TF-RT-TMS-3300V-38.
TF-RT Subsea Umbilical & Medium-Voltage Core Standards
| Standard or specification | Application |
|---|---|
| ISO 13628-5 & IEC 60092-353 Subsea Medium-Voltage Core Design | Thin-wall 1 kV to 3.3 kV insulated conductor stress control, cyclic bend-over-sheave (CBOS) endurance and torque-balanced synthetic armouring. |
| IEC 60794-3 & ITU-T G.652.D / G.657.A2 FIST Optical Integrity | Laser-welded stainless-steel buffer tube hydrostatic crush resistance and optical attenuation verification (< 0.4 dB/km at 1550 nm). |
Certifications and document support
TEBAOFLEX ISO 9001 quality management and HV/OTDR factory test protocols
ISO 13628-5 — Subsea production systems: Design and testing of subsea umbilicals
IEC 60092-353 — Shipboard and offshore 1 kV and 3 kV extruded power core reference
Related cable options
Compare these cable options by service combination, movement, load, voltage and transmission requirement.
RM-Series & EOM Torque-Balanced Steel-Armoured Work-Class ROV Main-Lift Umbilical Cable (1–4.5 kV)
A related cable option for a different application or duty profile.
View productTF-HULL Ship Hull Biofouling Cleaning & Grooming Robot Buoyant Hybrid Tether Cable (8GAX50, 12GAX49, 24XM308 & 13XM469 Series)
A related cable option for a different application or duty profile.
View productOMB Series Subsea Electro-Hydraulic & Electro-Optical Hybrid Umbilical Cable (16OMB4, 16OMB6, 16OMB11, 19OMB40, 26OMB38, 27OMB24 & 35OMB22)
A related cable option for a different application or duty profile.
View productRequest a cable recommendation and quotation
Send the required services, cable length, mechanical duty, environment, termination and quantity. Our team will review the application before quoting.
- Include the product name or SKU plus the required cable length and quantity.
- Attach a specification, drawing or data sheet when available.




