Marine & Offshore Cables TEBAOFLEX

TF-RT Work-Class ROV TMS Excursion Tether & Subsea Intervention Cable (RT0084–RT0173 & 45XM301 Series)

TF-RT (TF-RT-TETHER) is a heavy-duty synthetic-fibre-reinforced dynamic excursion tether cable linking subsea Tether Management Systems (TMS cages or top-hats) to work-class intervention ROVs, high-power subsea hull-cleaning vehicles and 1,500 m sonar sleds. Covering cross-references RT0084, RT0106, RT0127, RT0133, RT0136, RT0137, RT0168, RT0171, RT0173 and 45XM301 across Ø 24.5–41.3 mm with 25–150 kN minimum breaking load.

Product information
SKU
TF-RT-TETHER
Brand
TEBAOFLEX
Product overview

TF-RT work-class ROV TMS excursion tether cables bridge the dynamic subsea span between a suspended steel-armoured Tether Management System (bale-arm top-hat or garage cage) and the free-swimming work-class ROV or heavy subsea cleaning/intervention skid across Ø 24.5 mm to Ø 41.3 mm diameters, 1.0–3.3 kV operating voltages and 25 kN to 150 kN minimum breaking loads.

Unlike steel-wire-armoured ROV main-lift umbilicals (which carry 185–880 kN vertical crane loads from the vessel winch down to the TMS), a TMS excursion tether spools horizontally in and out through pinch-wheel traction drives and tight 200–400 mm bellmouth sheaves while floating neutrally or slightly negatively (-20 to +285 kg/km in seawater) at working depth. TF-RT combines torque-balanced contra-helical liquid-crystal-polymer (LCP) or aramid strength layers, syntactic/cellular buoyancy jackets, laser-welded stainless-steel FIST optical tubes, and cut-resistant yellow or black subsea polyurethane outer sheaths.

Specify exact replacements for industry-standard excursion tether designations RT0127 (24.5 mm buoyant), RT0133 / RT0137 / RT0173 (27.0 mm), RT0084 / RT0168 (28.0 mm), RT0106 / RT0136 / RT0171 (35.0 mm, 130–135 kN), 45XM301 (41.3 mm sonar/coax/FIST work-class hybrid), or 3.0–3.3 kV HPU excursion builds. Supplied as continuous bulk cable with heat-shrink water-blocking end caps from 50 m MOQ in 7 to 45 working days.

Explore the marine, offshore and shipboard cable range for related configurations.

Construction

TF-RT Work-Class ROV TMS Excursion Tether Construction

Engineered for cyclic bend-over-sheave (CBOS) TMS traction drives with thin-wall medium-voltage power cores, hermetically sealed FIST optical tubes and torque-balanced synthetic armour.

Clean 2D circular engineering cross-section of TF-RT work-class ROV TMS excursion tether showing thick yellow PUR sheath, double contra-helical synthetic fiber tensile ring, syntactic buoyancy layer, three thick-wall power cores, three control cores and central stainless-steel FIST fiber unit
Cross-section: torque-balanced non-metallic tensile armour and central stainless-steel FIST unit engineered for 200–400 mm dynamic bend radii.
TF-RT Work-Class ROV TMS Excursion Tether & Subsea Intervention Cable (RT0084–RT0173 & 45XM301 Series) construction
ComponentMaterial and construction
1. Thin-Wall 1.0 kV – 3.3 kV Power & Instrumentation ConductorsFlexible bare or tinned copper conductors (0.22 mm² to 16 mm²) with concentric dual-extruded thin-wall XLPE, crosslinked HDPE or polypropylene insulation optimized for compact TMS drum spooling.
2. Fibre-in-Steel-Tube (FIST / FIMT) Optical & Optional Sonar Coax UnitsLaser-welded 316L stainless-steel buffer tube filled with thixotropic hydrogen-scavenging gel housing 2 to 12 SM (G.652.D / G.657.A2) and MM (50/125) fibers; optional 50/75-ohm side-scan sonar coax on 45XM301.
3. Longitudinal Water-Blocking & Inner Bedding SheathVoid-free silicone or elastomeric water-blocking compound and swelling tapes preventing axial water migration under 150–300 bar hydrostatic pressure.
4. Dedicated Syntactic Buoyancy Layer & Contra-Helical LCP / Aramid ArmourDepth-rated syntactic microspheres or closed-cell foam paired with opposing-lay liquid-crystal-polymer (LCP) or aramid fiber layers delivering 25 kN to 150 kN non-rotating tensile strength.
5. TMS Traction-Drive Polyurethane / Polyester Elastomer Outer SheathHigh-durometer hydrolysis- and abrasion-resistant subsea PUR (or UV-stabilized TPEE on 45XM301) engineered to grip TMS pinch wheels without jacket delamination.

TF-RT & RT0084–RT0173 / 45XM301 Reference Breakdown

  • TF-RT RT0127 .. RT0173: Direct work-class TMS excursion tether equivalents spanning Ø 24.5 mm (25 kN buoyant) to Ø 35.0 mm (135 kN heavy HPU)
  • TF-RT 45XM301: Ø 41.3 mm, 1,500 m depth, 100 kN work-class ROV instrumentation hybrid integrating SM FIST fibers, side-scan sonar coax and power
  • FIST / FIMT: Fibre-in-Steel-Tube: hermetically laser-welded 316L stainless-steel tube protecting 2 to 12 SM/MM optical fibers against hydrostatic crush
  • STQ / STP: Screened Twisted Quad (STQ) or Screened Twisted Pair (STP) 100–120 Ω telemetry elements for ROV MUX and sonar control
  • TMS-3000V / 3300V: Thin-wall 3.0 kV and 3.3 kV medium-voltage three-phase excursion tethers for 100–250 hp work-class ROV hydraulic packs
Applications

TF-RT TMS Cages, Work-Class Intervention & Heavy Subsea Skids

Designed for garage and top-hat TMS excursion reels on work-class ROVs, heavy hull/offshore cleaning skids, trenching support vehicles and deep tow instrumentation.

Submerged ROV Tether Management System cage paying out a bright-yellow TF-RT dynamic excursion tether cable through a bellmouth sheave to a work-class subsea intervention ROV
Subsea garage/top-hat TMS deploying a flexible yellow TF-RT excursion tether to a free-swimming work-class ROV.
  • Work-class ROV garage and top-hat Tether Management System (TMS) dynamic excursion reels (150 m to 600 m typical payout).
  • Heavy offshore jacket marine-growth removal, cavitation cleaning skids and FPSO mooring-chain inspection ROVs.
  • Subsea tree/manifold intervention, BOP secondary hot-stab ROVs, pipeline touchdown monitoring and salvage vehicles.
  • 1,500 m work-class ROV multi-sensor instrumentation, side-scan sonar and sub-bottom profiler hybrid links (45XM301 configuration).

TF-RT Excursion Tether vs Main Lift & Electro-Hydraulic Umbilicals

TF-RT TMS Excursion Tether vs RM-Series Steel-Armoured Main Lift Umbilical vs TF-HULL Shallow Cleaning Tether vs Subsea Electro-Hydraulic Umbilical
Subsea Cable TypeSubsea Span & ArmourBreaking Load & Weight in WaterPrimary Winch / Handling System
TF-RT Excursion Tether (this page)TMS cage to work-class ROV (LCP/Aramid)25–150 kN; near-neutral (-20 to +285 kg/km)Subsea TMS pinch-wheel & drum (200–400 mm bend)
RM-Series Main Lift UmbilicalSurface vessel A-frame to TMS (Contra-helical GSW)185–880 kN; heavy sinking (815–4,350 kg/km)Topside traction / storage winch & A-frame heave sheave
TF-HULL Biofouling TetherPier/boat direct to hull-cleaning ROV (Aramid)5–70 kN; tuned harbor floating (-35 to 0 kg/km)Deck reel or hand payout in 0.5–50 m port water
OMB Electro-Hydraulic UmbilicalSurface to subsea tool skid (LCP + hoses)30–100 kN; integrates 70–350 bar hosesLarge-drum hydraulic intervention reel (500–730 mm bend)

Need the topside-to-TMS galvanized steel-armoured lift cable (RM0037, RM0049, RM0060, RM0066, RM0067, 185–880 kN)? Visit our dedicated Steel-Armoured ROV Main Lift Umbilical page.

TF-RT TMS Excursion Tether Engineering RFQ Checklist

  • Target RT cross-reference (e.g., RT0106, RT0127, RT0168, RT0171, RT0173, 45XM301) or exact TMS drum groove diameter and maximum cable OD tolerance (e.g., 27.0 ± 0.8 mm).
  • ROV HPU operating voltage (e.g., 1,000 V, 2,400 V, 3,000 V or 3,300 V AC/DC), phase current and acceptable voltage drop over excursion length.
  • FIST optical fiber count (SM G.657.A2 + MM 50/125) and any screened twisted quads (STQ), pairs (STP) or 50/75-ohm sonar coaxial cores.
  • Maximum operating water depth (e.g., 300 m, 1,000 m, 2,000 m or 3,000 m) and target submerged weight in seawater (kg/km).
  • Continuous excursion length per drum (e.g., 200 m, 350 m, 600 m; supplied as bulk cable with heat-shrink end caps, MOQ 50 m in 7 to 45 working days).

Related selection resources

TF-RT Work-Class ROV TMS Excursion Tether Cable FAQ

What is the difference between a TF-RT ROV TMS excursion tether and an RM-series ROV main lift umbilical?

TF-RT uses lightweight non-metallic LCP or aramid fiber armour (25–150 kN MBL, -20 to +285 kg/km in seawater, 200–400 mm dynamic bend radius) so a work-class ROV can swim freely out of its subsea TMS cage, whereas RM-series main-lift umbilicals use heavy contra-helical steel wire armour (185–880 kN MBL) to hoist both the TMS and ROV from the vessel.

What is the true minimum breaking load of the Ø 27 mm RT0173 ROV tether cable?

110 kN (approx. 11.2 metric tons) is the correct textile-armoured minimum breaking load for the Ø 27.0 mm RT0173 configuration—correcting a known '1100 kN' decimal-missing typo in a legacy 1-page industry flyer.

How do TF-RT excursion tethers achieve tight 200–275 mm dynamic bend radii without crushing optical fibers?

1.8–2.4 mm laser-welded 316L stainless-steel FIST tubes placed near the neutral axis or laid at optimized helix angles isolate single-mode and multimode fibers from pinch-wheel radial compression and syntactic foam strain.

Can TF-RT tethers be manufactured for 3,000 V or 3,300 V work-class ROV hydraulic power units?

Yes — dual-extruded thin-wall medium-voltage XLPE/EPR insulation supports 3.0 kV and 3.3 kV three-phase HPU transmission inside Ø 27–38.5 mm tethers while maintaining TMS drum capacity.

How are TF-RT excursion tether cables packed and what is the MOQ and lead time?

50 m minimum order quantity (typically ordered in 150 m to 650 m continuous TMS drum lengths), shipped as bulk cable on wooden reels with heat-shrink water-blocking end caps in 7 to 45 working days.

Specifications

TF-RT (RT0084–RT0173 & 45XM301) Excursion Tether Schedule

TF-RT Breaking Load (25–150 kN), FIST Optics & 50 m MOQ

  • Complete RT0084–RT0173 coverage: Direct dimensional and electro-optical equivalents for Ø 24.5 mm, 27.0 mm, 28.0 mm and 35.0 mm TMS excursion tethers plus Ø 41.3 mm 45XM301 deepwater sonar hybrid
  • High-cycle TMS drum & sheave life: Contra-helical LCP / aramid textile armour and thin-wall medium-voltage insulation survive thousands of cyclic bend-over-sheave (CBOS) excursions at 200–400 mm dynamic bend radius
  • 1.0 kV to 3.3 kV thin-wall power: Dual-extruded thin-wall XLPE / EPR / PP power cores (2.0 mm² to 16 mm²) transmit 15–150 kW hydraulic HPU power from the TMS transformer to the ROV
  • Laser-welded FIST stainless optical units: Hermetically sealed Fibre-in-Steel-Tube (FIST / FIMT) assemblies carrying 2 to 12 single-mode and multimode fibers resist hydrostatic crush down to 1,500–3,000 m
  • Continuous bulk drum, MOQ 50 m: Delivered in continuous excursion lengths (150 m, 300 m, 600 m or custom, MOQ 50 m) on wooden reels with heat-shrink water-blocking end caps in 7 to 45 working days
TF-RT Work-Class ROV TMS Excursion Tether & Subsea Intervention Cable (RT0084–RT0173 & 45XM301 Series) technical data
ParameterValue
Rated voltage1.0 kV to 3.3 kV AC / DC ROV HPU power cores; 250 V to 600 V control quads, pairs and sonar coax
Finished diameter range24.5 mm to 35.0 mm across RT0084 to RT0173 TMS tethers; up to 41.3 mm on 45XM301 and 3.3 kV heavy work-class builds
Minimum breaking load25 kN (light buoyant RT0127) and 70 to 135 kN across standard 27 to 35 mm RT tethers; up to 150 kN on heavy 3.3 kV TMS tethers
Seawater weight and bend radius-20 kg/km (buoyant) to +285 kg/km controlled submerged trim; 200 mm to 400 mm minimum dynamic bending radius over TMS sheaves
Supply form and MOQContinuous bulk cable on wooden drums with heat-shrink water-blocking end caps (TMS socket/potting by client); MOQ 50 m in 7 to 45 working days
Optical fiber package1 or 2 stainless-steel FIST units containing 2 SM, 4 SM, 6 SM, 8 SM, 6 SM + 6 MM, or 8 SM + 4 MM fibers
Depth and temperature rating-30 °C to +80 °C; standard syntactic flotation rated to 500–1,000 m or 1,500–3,000 m deepwater work-class service

TF-RT (RT0084–RT0173) Work-Class TMS Excursion Tether Schedule

TF-RT Work-Class ROV TMS Excursion Tether Schedule (Cross-Reference RT0084, RT0106, RT0127, RT0133, RT0136, RT0137, RT0168, RT0171 & RT0173)
Model & RT ReferencePower & Signal ConductorsFIST Optical Fiber UnitNom. OD (mm)Air / Seawater Wt (kg/km)Min. Dyn. Bend Radius (mm)Min. Breaking Load (kN)Next step
TF-RT RT01272 × 2.0 mm² + 2 × 0.5 mm²1 × 2 SM FIST (Buoyant layer)24.5450 / -20 (Buoyant)24025Request this size
TF-RT RT01372 × 0.88 mm² + 2 × 0.22 mm²1 × 4 SM FIST27.0760 / 17030080Request this size
TF-RT RT01336 × 4.0 mm² + 3 × 0.34 mm²1 × 8 SM FIST27.0850 / 265400100Request this size
TF-RT RT01733 × 6.0 + 2 × 2.5 + 1 × 0.5 mm²1 × 6 SM FIST27.0860 / 270200110Request this size
TF-RT RT00843 × 4.0 mm² + 2 × 0.88 mm²1 × 6 SM FIST28.0665 / 3925070Request this size
TF-RT RT01686 × 4.0 + 2 × 1.0 + 4 × 0.6 mm²1 × 8 SM + 4 MM FIST28.0915 / 285400100Request this size
TF-RT RT01063 × 6.0 + 2 × 2.5 + 4 × 0.5 mm²1 × 6 SM + 6 MM FIST35.01,200 / 210275130Request this size
TF-RT RT01363 × 6.0 + 2 × 2.5 mm² + 1 × 0.5 STQ1 × 6 SM + 6 MM FIST (Buoyant)35.01,200 / 205400130Request this size
TF-RT RT01713 × 6.0 mm² + 2 × 2.5 mm²1 × 6 SM + 6 MM FIST35.01,105 / 120200135Request this size

TF-RT (45XM301 & 3.3 kV) Deepwater Sonar & HPU Tether Schedule

TF-RT Deepwater Sonar & 3.0–3.3 kV Heavy HPU Work-Class ROV Hybrid Tether Schedule (45XM301 & HV TMS Series)
Model & ConfigurationHV Power & Coax / Signal ElementsOptical Fiber PackageNom. OD (mm)Max Depth RatingMin. Dyn. Bend Radius (mm)Min. Breaking Load (kN)Next step
TF-RT 45XM301Bare Cu power/comm + Side-scan sonar coaxSM fibers in stainless tube41.31,500 m415100 (10,000 daN)Request this size
TF-RT TMS-3000V-323 × 10 mm² (3.0 kV) + 2 × 2 × 0.75 mm²1 × 12 SM G.657.A2 FIST32.02,000 m320120Request this size
TF-RT TMS-3300V-383 × 16 mm² (3.3 kV) + 3 × 2 × 0.75 mm²2 × 6 SM/MM FIST38.53,000 m385150Request this size

Engineering verification note on RT0173 breaking load: one widely circulated legacy 1-page flyer misprints the Ø 27 mm RT0173 textile tether breaking load as '1100 kN' (a 10× typographical error exceeding Ø 40 mm steel-armoured main-lift cables); the physically verified textile-braid rating for Ø 27 mm 3×6+2×2.5 mm² construction is 110 kN (consistent with Ø 28 mm RT0168 at 100 kN and Ø 35 mm RT0171 at 135 kN).

ASCII part references for BOM and ERP entry: TF-RT-RT0084, TF-RT-RT0106, TF-RT-RT0127, TF-RT-RT0133, TF-RT-RT0136, TF-RT-RT0137, TF-RT-RT0168, TF-RT-RT0171, TF-RT-RT0173, TF-RT-45XM301, TF-RT-TMS-3000V-32, TF-RT-TMS-3300V-38.

Standards

TF-RT Subsea Umbilical & Medium-Voltage Core Standards

TF-RT Work-Class ROV TMS Excursion Tether & Subsea Intervention Cable (RT0084–RT0173 & 45XM301 Series) standards and test references
Standard or specificationApplication
ISO 13628-5 & IEC 60092-353 Subsea Medium-Voltage Core DesignThin-wall 1 kV to 3.3 kV insulated conductor stress control, cyclic bend-over-sheave (CBOS) endurance and torque-balanced synthetic armouring.
IEC 60794-3 & ITU-T G.652.D / G.657.A2 FIST Optical IntegrityLaser-welded stainless-steel buffer tube hydrostatic crush resistance and optical attenuation verification (< 0.4 dB/km at 1550 nm).

Certifications and document support

TEBAOFLEX ISO 9001 quality management and HV/OTDR factory test protocols

ISO 13628-5 — Subsea production systems: Design and testing of subsea umbilicals

IEC 60092-353 — Shipboard and offshore 1 kV and 3 kV extruded power core reference

Compare by duty

Related cable options

Compare these cable options by service combination, movement, load, voltage and transmission requirement.

Engineering-led quotation

Request a cable recommendation and quotation

Send the required services, cable length, mechanical duty, environment, termination and quantity. Our team will review the application before quoting.

  • Include the product name or SKU plus the required cable length and quantity.
  • Attach a specification, drawing or data sheet when available.

    MOQ 50 m · Engineering reply within 24 hours

    By submitting this form, you agree that TEBAOFLEX may use the contact information and files provided to review and respond to your enquiry. Files are used for quotation and engineering communication related to your request. See our Privacy Policy for current data handling and retention information.

    Email or WhatsApp is enough. Please include the key cable or application details for review.