


Pt100 & Pt1000 Screened FEP & PFA RTD Sensor Cable (3-, 4- & 6-Wire)
Pt100 and Pt1000 screened FEP/C/FEP (-90 °C to +205 °C) and PFA/C/PFA (-90 °C to +260 °C) RTD sensor connection cables (TF-FEP-PFA-PT100-RTD) feature resistance-matched plated copper conductors (0.14 mm² to 1.50 mm²), IEC 60751 red/white polarity cores and >= 85 % plated copper EMC braid screening. Built for 3-wire, 4-wire Class AA/A and duplex 6-wire platinum resistance thermometers on 300 m reels.
Screened FEP/C/FEP and PFA/C/PFA Pt100, Pt500 and Pt1000 resistance thermometer connection cables deliver ultra-stable milliohm signal transmission from -90 °C cryogenic skids up to +260 °C process thermowells, spanning 2.8 mm miniature 4×0.14 mm² probe transition tails up to 7.4 mm 4×1.50 mm² field transmitter leads.
On a 100 Ohm Pt100 sensor (0.385 Ohm/°C temperature coefficient), just 0.19 Ohm of uncompensated lead resistance imbalance or wet-insulation leakage creates a 0.5 °C error — enough to push an IEC 60751 Class A (+/-0.15 °C) or Class AA (+/-0.10 °C) sensor out of specification. TEBAOFLEX pairs co-drawn tinned, silver-plated or nickel-plated copper strands inside > 5 GOhm*km fluoropolymer insulation and a >= 85 % copper EMC braid. Low-capacitance fluoropolymer dielectrics and concentric star-quad core geometry also suppress triboelectric and electromagnetic transient noise near variable-speed drives.
Select 3-wire builds (2 red + 1 white) for general industrial transmitters, 4-wire Kelvin builds (2 red + 2 white) for Class AA custody-transfer, pharmaceutical SIP and semiconductor chillers, or 6-wire builds (4 red + 2 white) for redundant dual-element Pt100 probes (MOQ 300 m per construction, 7 to 45 working days).
Explore the high-temperature wire and cable range for related configurations.
Pt100 FEP/C/FEP & PFA/C/PFA RTD Cable Construction
All cores in a 3-, 4- or 6-wire RTD lot are stranded from the same wire-drawing batch and laid symmetrically to equalise DC resistance and thermal EMF.

| Component | Material and construction |
|---|---|
| 1. Matched Plated Copper Strands (0.14 mm² to 1.50 mm²) | Fine 7-strand or 19-strand tinned copper (up to +180 °C), silver-plated copper (up to +205/+250 °C) or nickel-plated copper (up to +260 °C) with < 1.5 % inter-core resistance spread. |
| 2. Thin-Wall FEP or PFA Core Insulation (IEC 60751 Colours) | Pinhole-free fluoropolymer core wall (> 5 GOhm*km) colour-coded per IEC 60751: red + white (2-wire), 2 red + 1 white (3-wire), 2 red + 2 white (4-wire) or 4 red + 2 white (6-wire). |
| 3. Symmetrical Lay-Up, PTFE Wrap & >= 85 % Plated Copper Braid | Symmetric star-quad (4-wire) or concentric lay-up wrapped with low-friction PTFE tape and an >= 85 % optical-coverage plated copper EMC screen. |
| 4. Smooth Extruded FEP or PFA Outer Sheath | Rust-brown, white or black cleanroom-grade fluoropolymer outer sheath impervious to CIP/SIP caustic washdowns, steam, solvents, acids and oils. |
Pt100 IEC 60751 RTD Cable Code & Colour Breakdown
- FEP / PFA: Core and outer sheath polymer: FEP (-90 to +205 °C) or PFA (-90 to +260 °C)
- C: Overall >= 85 % tinned, silver-plated or nickel-plated copper wire EMC braid
- 3x / 4x / 6x: 3-wire (2R+1W), 4-wire Kelvin (2R+2W) or 6-wire duplex Pt100 (4R+2W) per IEC 60751
- 0.14–1.50 mm²: Matched plated-copper conductor cross-section (26 AWG to 16 AWG)
- SPC / NPC: Silver-plated copper (<= +205/+250 °C) or nickel-plated copper (<= +260 °C)
Pt100 CIP/SIP Bioreactor, Semiconductor & Cryogenic Duty
Purpose-engineered for direct Pt100 / Pt1000 probe potting transitions and field thermowell-to-transmitter wiring.

- Sanitary pharmaceutical bioreactors, WFI clean-steam loops, CIP/SIP skids and food pasteurizers requiring waterproof, autoclave-proof 4-wire Pt100 leads.
- Semiconductor wafer-chuck chillers (-90 °C to +200 °C), wet chemical etch baths and ultra-clean PWIS/silicone-free tool harnesses.
- Custody-transfer LNG/petrochemical metering skids, turbine bearing temperature probes and Stator Winding RTD slot leads.
- Laboratory calibration baths, climatic chambers, vacuum ovens and industrial plastics extruder barrel sensors.
FEP/C/FEP & PFA/C/PFA Pt100 Cable vs Silicone SiHFC
| Cable Construction | Conductor Metal | Temp. & OD Advantage | Target Sensor Type |
|---|---|---|---|
| FEP/C/FEP RTD (this page) | Silver/tinned copper | -90 to +205 °C; 3.1 mm slim OD on 4x0.22 mm² | Pt100 / Pt1000 Class AA/A probes, CIP/SIP & cleanrooms |
| PFA/C/PFA RTD (this page) | Silver/nickel-plated copper | -90 to +260 °C continuous chemical/vacuum duty | 260 °C stator slot RTDs, semiconductor & acid reactors |
| Silicone SiHFC / FEP-Bi | Tinned copper | -60 to +180 °C; thicker soft rubber wall | General dry ovens where PWIS/solvent immunity is not required |
| Thermocouple KX/TX (FLU06) | NiCr-NiAl / Cu-CuNi alloys | High loop resistance (never use on Pt100!) | Millivolt thermocouple sensors only (IEC 60584) |
For cable runs > 15 m or Class AA/A accuracy, specify 4-wire RTD construction (0.34 mm² to 1.0 mm²) to eliminate lead-wire resistance error completely.
Pt100 & Pt1000 Fluoropolymer RTD Cable RFQ Checklist
- RTD wiring configuration: 3-wire (2 red + 1 white), 4-wire Kelvin (2 red + 2 white), 6-wire duplex (4 red + 2 white) or 8-wire dual 4-wire.
- Conductor cross-section (0.14, 0.22, 0.34, 0.50, 0.75, 1.00 or 1.50 mm²) matched to probe sleeve ID or transmitter terminal gauge.
- Temperature grade and plating: FEP/C/FEP (+180 °C TPC or +205 °C SPC) or PFA/C/PFA (+250 °C SPC or +260 °C NPC).
- Outer sheath colour (rust-brown, white cleanroom or black) and reel quantity (MOQ 300 m per size, 7 to 45 working days).
Related selection resources
- Browse all High-Temperature Fluoropolymer & Sensor Cables
- Compare FEP, PFA & PTFE Thermocouple Duplex Wire & Multi-Pair KX/TX Cable
- View UL 21618 Screened FEP & 260 °C Controlled-Impedance Data Cable
- View FEP-6Y & FEP-C-6Y Multi-Core High-Temp Control Cable
- Engineering guide: Copper conductor platings for thermal & chemical service
Pt100 Screened FEP & PFA RTD Sensor Cable FAQ
Should I choose 3-wire or 4-wire screened FEP/PFA cable for Pt100 sensors?
4-wire (2 red + 2 white) is mandatory for IEC 60751 Class AA (+/-0.10 °C) and Class A (+/-0.15 °C) loops because separate current-excitation and voltage-sense leads cancel lead resistance 100 %, whereas 3-wire assumes all three conductors have identical resistance.
Why is silver-plated copper preferred over nickel-plated copper below +205 °C on Pt100 leads?
Lower DC resistance and clean solderability: silver-plated copper has ~4 % lower resistance than nickel-plated copper and wets effortlessly with lead-free solder inside miniature 3 mm–6 mm stainless Pt100 probe transitions; reserve nickel-plated copper for +250 °C to +260 °C PFA crimp/weld terminations.
Why does insulation resistance (> 5 GOhm*km) matter so much on Pt1000 sensors?
Parallel shunt error: at +250 °C a Pt1000 element measures ~1,941 Ohm, so wet silicone or fibreglass insulation dropping to 1 MOhm shunts the element and causes an immediate -0.5 °C reading error; non-hygroscopic FEP and PFA stay orders of magnitude higher.
Are these FEP/C/FEP and PFA/C/PFA RTD cables silicone-free for semiconductor and paint plants?
Yes — 100 % fluoropolymer core and sheath extrusion uses zero silicone oils or mould-release agents (PWIS/LABS-free), making them safe for automotive e-coat ovens and cleanrooms.
What is the minimum order quantity and lead time for Pt100 FEP/C/FEP & PFA cables?
300 m per cross-section and temperature grade in continuous factory reels, manufactured and routine dielectric/resistance tested in 7 to 45 working days.
FEP/C/FEP (205 °C) & Pt100 PFA/C/PFA (260 °C) Schedules
Pt100 Loop Resistance, Insulation Resistance & Reel Summary
- Resistance-matched RTD cores: Tightly balanced plated copper stranding (0.14 mm² to 1.50 mm²) minimizes lead-wire bridge unbalance on 3-wire and 4-wire Class AA / Class A Pt100 loops
- IEC 60751 red & white coding: Standardised red/white core combinations (2 red + 1 white for 3-wire; 2 red + 2 white for 4-wire; 4 red + 2 white for duplex 3-wire RTDs)
- FEP 205 °C & PFA 260 °C grades: Cryogenic -90 °C up to +205 °C (FEP/C/FEP with SPC) or +260 °C continuous (PFA/C/PFA with SPC/NPC) with < 0.01 % moisture uptake
- Dense >= 85 % plated Cu braid: Tinned, silver-plated or nickel-plated copper braid blocks VFD motor switching transients and 50/60 Hz common-mode hum on milliohm RTD bridges
- Slim OD & 300 m factory reels: Ultra-compact 2.8 mm OD on 4x0.14 mm² probe tails up to 7.4 mm on 4x1.5 mm² field leads; MOQ 300 m continuous reels in 7 to 45 working days
| Parameter | Value |
|---|---|
| Rated voltage | 300 V / 500 V AC instrumentation rating (2000 V AC 50 Hz dielectric test) with over 5 GOhm*km insulation resistance at 20 C |
| Circuit configurations and sizes | 3-wire, 4-wire (Kelvin) and 6-wire (duplex Pt100) in 0.14, 0.22, 0.25, 0.34, 0.50, 0.75, 1.00 and 1.50 mm2 (26 AWG to 16 AWG) |
| Fluoropolymer and plating options | FEP/C/FEP (-90 C to +180 C TPC or +205 C SPC) and PFA/C/PFA (-90 C to +250 C SPC or +260 C NPC) with 85% plated copper braid |
| Sensor accuracy compatibility | Low inter-core resistance unbalance and zero moisture leakage preserve IEC 60751 Class AA, Class A and 1/10 DIN Pt100 / Pt1000 accuracy |
| Standard put-up and lead time | 300 m minimum order continuous factory reels per size and grade with a 7 to 45 working days manufacturing lead time |
| Core identification | IEC 60751 standard RTD polarity colours (red and white combinations; numbered or custom colour sets available for dual 4-wire 8-core probes) |
| Cleanroom and chemical rating | 100% silicone-free (PWIS/LABS-free), non-outgassing, FDA/USP-compatible fluoropolymer surface resistant to CIP/SIP chemicals and IEC 60332-1-2 flame |
FEP/C/FEP (-90 °C to +205 °C) Screened Pt100 / Pt1000 RTD Cable Schedule
| Model & Configuration | IEC 60751 Core Colours | Stranding & Plating | Max. Cond. R at 20 °C (Ω/km) | Nom. OD (mm) | Copper Figure (kg/km) | Approx. Weight (kg/km) | Standard Reel MOQ | Next step |
|---|---|---|---|---|---|---|---|---|
| FEP/C/FEP 3x0.14 mm² | 2 Red + 1 White | 7x0.16 SPC | 138.0 | 2.6 | 8.5 | 14 | 300 m reel | Request this size |
| FEP/C/FEP 4x0.14 mm² | 2 Red + 2 White | 7x0.16 SPC | 138.0 | 2.8 | 10.2 | 17 | 300 m reel | Request this size |
| FEP/C/FEP 3x0.22 mm² | 2 Red + 1 White | 7x0.20 SPC | 85.0 | 2.9 | 12.4 | 20 | 300 m reel | Request this size |
| FEP/C/FEP 4x0.22 mm² | 2 Red + 2 White | 7x0.20 SPC | 85.0 | 3.1 | 15.2 | 24 | 300 m reel | Request this size |
| FEP/C/FEP 6x0.22 mm² | 4 Red + 2 White | 7x0.20 SPC | 85.0 | 3.8 | 21.5 | 34 | 300 m reel | Request this size |
| FEP/C/FEP 3x0.34 mm² | 2 Red + 1 White | 7x0.25 SPC | 56.0 | 3.4 | 17.8 | 28 | 300 m reel | Request this size |
| FEP/C/FEP 4x0.34 mm² | 2 Red + 2 White | 7x0.25 SPC | 56.0 | 3.7 | 21.6 | 33 | 300 m reel | Request this size |
| FEP/C/FEP 3x0.50 mm² | 2 Red + 1 White | 19x0.18 SPC | 38.2 | 3.9 | 24.5 | 38 | 300 m reel | Request this size |
| FEP/C/FEP 4x0.50 mm² | 2 Red + 2 White | 19x0.18 SPC | 38.2 | 4.3 | 30.0 | 45 | 300 m reel | Request this size |
| FEP/C/FEP 4x0.75 mm² | 2 Red + 2 White | 19x0.23 SPC | 25.4 | 4.9 | 42.0 | 62 | 300 m reel | Request this size |
| FEP/C/FEP 4x1.00 mm² | 2 Red + 2 White | 19x0.26 SPC | 19.1 | 5.4 | 54.0 | 78 | 300 m reel | Request this size |
| FEP/C/FEP 4x1.50 mm² | 2 Red + 2 White | 19x0.32 SPC | 12.9 | 6.5 | 79.0 | 112 | 300 m reel | Request this size |
PFA/C/PFA (-90 °C to +260 °C) Extreme-Temperature Pt100 RTD Cable Schedule
| Model & Configuration | IEC 60751 Core Colours | Conductor & Braid Plating | Continuous Temp. | Nom. OD (mm) | Approx. Weight (kg/km) | Standard Reel MOQ | Next step |
|---|---|---|---|---|---|---|---|
| Pt100 PFA/C/PFA 3x0.22 mm² | 2 Red + 1 White | 19x0.12 SPC or NPC | -90 to +260 °C | 2.9 | 21 | 300 m reel | Request this size |
| Pt100 PFA/C/PFA 4x0.22 mm² | 2 Red + 2 White | 19x0.12 SPC or NPC | -90 to +260 °C | 3.1 | 25 | 300 m reel | Request this size |
| Pt100 PFA/C/PFA 6x0.22 mm² | 4 Red + 2 White | 19x0.12 SPC or NPC | -90 to +260 °C | 3.8 | 35 | 300 m reel | Request this size |
| Pt100 PFA/C/PFA 3x0.50 mm² | 2 Red + 1 White | 19x0.18 SPC or NPC | -90 to +260 °C | 3.9 | 39 | 300 m reel | Request this size |
| Pt100 PFA/C/PFA 4x0.50 mm² | 2 Red + 2 White | 19x0.18 SPC or NPC | -90 to +260 °C | 4.3 | 46 | 300 m reel | Request this size |
| Pt100 PFA/C/PFA 4x0.75 mm² | 2 Red + 2 White | 19x0.23 SPC or NPC | -90 to +260 °C | 4.9 | 64 | 300 m reel | Request this size |
| Pt100 PFA/C/PFA 4x1.00 mm² | 2 Red + 2 White | 19x0.26 SPC or NPC | -90 to +260 °C | 5.4 | 80 | 300 m reel | Request this size |
ASCII part references for BOM entry: TF-RTD-FEPC-3X022, TF-RTD-FEPC-4X022, TF-RTD-FEPC-6X022, TF-RTD-FEPC-4X050, TF-RTD-FEPC-4X100, TF-RTD-PFAC-4X022, TF-RTD-PFAC-4X050.
Note on conductor material: RTD connection cables ALWAYS use low-resistance plated copper conductors (never thermocouple alloys!), whereas thermocouple cables use K/J/T/E/N thermoelectric alloys.
Pt100 IEC 60751, DIN VDE 0207-6 & Flame Standards
| Standard or specification | Application |
|---|---|
| IEC 60751 (DIN EN 60751) | Industrial platinum resistance thermometers (Pt100, Pt500, Pt1000) accuracy classes (AA, A, B) and 2/3/4-wire red/white lead colour coding. |
| DIN VDE 0207-6 / ASTM B298 / ASTM B355 | Fluoropolymer insulation compounds and silver- or nickel-plated copper conductor stranding and DC resistance limits. |
| IEC 60332-1-2 | Single-cable vertical flame self-extinguishing test. |
Certifications and document support
TEBAOFLEX ISO 9001 quality management and DC conductor resistance balance testing
IEC 60751 — Industrial platinum resistance thermometers and platinum temperature sensors
IEC 60332-1-2 — Vertical flame propagation test for insulated wires and cables
Related cable options
Compare these cable options by service combination, movement, load, voltage and transmission requirement.
FEP, PFA & PTFE Thermocouple Wire & Screened Multi-Pair Cable (K, J, T, E, N)
A related cable option for a different application or duty profile.
View productUL 21618 Screened FEP Data Cable & 260 °C FEP/PFA Controlled-Impedance Cable
A related cable option for a different application or duty profile.
View productFEP-6Y & FEP-C-6Y Multi-Core & Screened FEP Control Cable (-100 to +205 °C)
A related cable option for a different application or duty profile.
View productRequest a cable recommendation and quotation
Send the required services, cable length, mechanical duty, environment, termination and quantity. Our team will review the application before quoting.
- Include the product name or SKU plus the required cable length and quantity.
- Attach a specification, drawing or data sheet when available.




