Oil and Gas Cables TEBAOFLEX

4SSA27 & FIMT-EO Armoured Fiber-Optic & Hybrid Electro-Optical Wireline Logging Cable (DTS / DAS)

4SSA27 and FIMT-EO double-armoured fiber-optic and hybrid electro-optical wireline logging cables enclose 1 to 12 pure-silica or graded-index optical fibres (with optional hermetic carbon/polyimide coating up to 300 °C) inside a laser-welded 316L stainless-steel or Alloy 825 FIMT tube plus optional 500 to 1,200 V DC copper conductors and contra-helical wire armour (3.18 to 14.30 mm OD, 8.5 to 90 kN).

Product information
SKU
TF-EO-FIMT-WIRELINE
Brand
TEBAOFLEX
Product overview

4SSA27 and FIMT-EO armoured fiber-optic and hybrid electro-optical wireline logging cables deliver distortion-free distributed acoustic sensing (DAS), distributed temperature sensing (DTS) and gigabit-rate real-time tool telemetry in dynamic winch-deployed wellbores across outer diameters from 3.18 mm (1/8 in) to 14.30 mm.

Conventional copper monoconductors and heptacables throttle data rates above a few hundred kilobits per second over 5,000 m runs and cannot acquire continuous full-wellbore Raman/Brillouin temperature or Rayleigh acoustic backscatter profiles. By sealing 1 to 12 bend-insensitive single-mode (ITU-T G.657.A1 / pure-silica 1550 nm) or 50/125 µm graded-index multimode fibres inside a gel-filled laser-welded 316L stainless-steel or Alloy 825 (UNS N08825) Fibre-in-Metal-Tube (FIMT) core—either armoured directly as a low-profile optical wireline (FIMT-OW125, FIMT-OW250, 4SSA27) or cabled with 2 to 6 fluoropolymer-insulated copper power conductors (FIMT-EO32, FIMT-EO46)—operators simultaneously power active downhole gauges/imagers and interrogate the entire wellbore optically.

Select 4SSA27 (6.60 mm, 12xG.657.A1 SM, 31 kN) or FIMT-OW250 (6.35 mm, 28 kN) for dedicated winch-spooled DAS/DTS hydraulic-fracture, steam-flood, CCUS plume and geothermal profiling; specify FIMT-EO32 (8.18 mm) or 15/32 in FIMT-EO46 (11.80 mm, 6 copper + 6 fibres, 90 kN) when active downhole tools require 1,000 to 1,200 V DC surface power; or see our TEC Tubing Encased Downhole Cable for permanent tubing-clamped completions.

Explore the oil, gas and petrochemical cable range for related configurations.

Construction

4SSA27 & FIMT-EO Laser-Welded Optical Tube & Double-Armour Construction

Every 4SSA27 and FIMT-EO cable isolates fragile silica fibres from radial winch crush, hydrostatic collapse and downhole hydrogen darkening through a dual-barrier architecture: hermetic carbon/polymer fibre coatings inside a laser-welded stainless or nickel-alloy FIMT, armoured with torque-balanced contra-helical steel wires.

Clean 2D engineering cross-section of hybrid electro-optical FIMT-EO wireline logging cable showing central gel-filled stainless-steel FIMT housing colour-coded optical fibres, concentric ring of fluoropolymer-insulated copper conductors and two contra-helical steel wire armour layers
FIMT-EO cross-section: central gel-filled metallic tube (1–12 SM/MM fibres), concentric insulated copper cores and 2-layer torque-balanced steel wire armour.
4SSA27 & FIMT-EO Armoured Fiber-Optic & Hybrid Electro-Optical Wireline Logging Cable (DTS / DAS) construction
ComponentMaterial and construction
1. Harsh-Environment Optical Fibres (SMF & 50/125 µm MMF, up to 300 °C)1 to 12 single-mode (9/125 µm G.657.A1 or pure-silica 1550 nm, <= 0.4–0.8 dB/km) and/or 50/125 µm graded-index multimode fibres (<= 3.0 dB/km at 850 nm, <= 1.2 dB/km at 1300 nm) with 150 °C acrylate, 200 °C carbon/silicone/PFA or 300 °C hermetic carbon/polyimide coatings (>= 100–200 kpsi proof test).
2. Laser-Welded 316L Stainless-Steel or Alloy 825 FIMTPrecision cold-formed and continuous laser-welded 316L stainless-steel or Alloy 825 (UNS N08825) tube (1.80 to 2.80 mm OD) with controlled excess fibre length (EFL) and thixotropic hydrogen-scavenging gel.
3. Polymeric Buffer or Hybrid Copper Power Core LayerExtruded PE, copolymer PP or fluoropolymer FEP/ETFE cushion over the central FIMT on pure optical builds (4SSA27), or 2 to 6 stranded tinned/nickel-coated copper conductors (20 to 16 AWG, 500 to 1,200 V DC) helically cabled with the FIMT on FIMT-EO hybrid builds.
4. Water-Blocking Bedding & Inter-Armour SealantHigh-temperature polymeric tape wrap and pressure-sealing anti-corrosion compound preventing wellbore gas migration and cushioning inner armour contact.
5. Double Contra-Helical Preformed Wire (or Aramid-PUR) ArmourTwo opposing helical layers of preformed GIPS/GEIPS galvanized steel or sour-service S75 / MP35N alloy wires (plus aramid-braided black PUR option on FIMT-6XM383 for non-metallic borehole electromagnetic surveys).
TEBAOFLEX workshop macro sample photograph of compact small-diameter double contra-helical steel-wire-armoured downhole detection and logging cable cut end isolated on white background
TEBAOFLEX real workshop sample: precision small-OD double contra-helical steel wire armour built for high-pressure borehole deployment.

4SSA27 / FIMT-OW / FIMT-EO Model & Coating Code Breakdown

  • 4SSA27 / 4SSA27-80: double contra-helical galvanized steel wire armoured pure optical borehole cable housing up to 12 single-mode fibres in a 2.54–2.80 mm stainless-steel FIMT (6.60 / 8.00 mm OD)
  • FIMT-OW125 / FIMT-OW250: low-profile 1/8 in (3.18 mm) and 1/4 in (6.35 mm) slickline-geometry armoured optical wirelines with 316L or Alloy 825 FIMT up to 300 °C
  • FIMT-EO32 / FIMT-EO46: 5/16 in (8.18 mm) and 15/32 in (11.80 mm) hybrid electro-optical wirelines combining 2 or 6 fluoropolymer copper conductors (1,000–1,200 V DC) with a central multi-fibre FIMT
  • CP / CSPFA / MTDA: downhole fibre coating tiers: Hermetic Carbon/Polyimide (300 °C), Carbon/Silicone/PFA (200 °C) and Mid-Temp Dual Acrylate (150 °C)
Applications

4SSA27 & FIMT-EO Downhole DTS, DAS, Geothermal & VSP Logging Applications

Deploy 4SSA27 and FIMT-EO optical and electro-optical wirelines across unconventional shale hydraulic-fracturing diagnostics, geothermal stimulation, CCUS injection monitoring and offshore borehole seismic surveys.

Wellsite fiber-optic wireline logging unit spooling slim double-armoured FIMT electro-optical cable through a wellhead lubricator sheave connected to a surface DAS and DTS optical interrogator rack
Dynamic wireline deployment of armoured FIMT optical cable for real-time hydraulic-fracture DAS/DTS and geothermal borehole profiling.
  • Winch-deployed Distributed Acoustic Sensing (DAS) and Distributed Temperature Sensing (DTS) for multi-stage hydraulic fracture cluster efficiency, cross-well strain and leak detection.
  • High-enthalpy geothermal borehole profiling (200 to 300 °C) and steam-assisted gravity drainage (SAGD) thermal chamber mapping using hermetic carbon/polyimide fibres.
  • Vertical Seismic Profiling (VSP), downhole microseismic monitoring and CCUS CO2 storage plume verification without deploying heavy multi-level mechanical geophone shuttles.
  • Hybrid electro-optical open-hole and cased-hole logging (FIMT-EO32 / FIMT-EO46) powering active downhole cameras, ultrasonic scanners, flowmeters and pressure gauges at 1,000–1,200 V DC.

4SSA27 Optical Wireline vs FIMT-EO Hybrid vs Permanent Downhole TEC

4SSA27 / FIMT-OW Pure Optical Wireline vs FIMT-EO Hybrid Wireline vs Permanent Downhole TEC/TEF
Downhole Optical ArchitectureDeployment MethodElectrical Power?Primary Sensing & Logging Use Case
4SSA27 / FIMT-OW Optical Wireline (this page)Dynamic winch spooling (3.18–8.00 mm SWA)No (100% optical FIMT)Slickline-profile multi-well DAS, DTS, VSP & frac-hit diagnostics
FIMT-EO32 / FIMT-EO46 Hybrid (this page)Dynamic wireline winch (8.18–11.80 mm SWA)Yes (2 to 6 Cu cores, 1–1.2 kV DC)Simultaneous powered downhole gauges/cameras/imagers + real-time DAS/DTS
FIMT-6XM383 Aramid-PUR EO (this page)Portable borehole winch (14.30 mm PUR)Yes (2x1.5 + 2x2x0.34 mm², 500 V)Non-magnetic borehole EM surveys, shallow marine & hydrogeological sensing
Permanent Tubing Encased TEC / TEFClamped outside production tubing1–2 Cu cores or permanent FIMTLife-of-well permanent PDHG gauge power & reservoir DTS/DAS monitoring

Choose slim 3.18 to 6.60 mm FIMT-OW / 4SSA27 when shutting in a live high-pressure well through small lubricator grease tubes; choose 11.80 mm FIMT-EO46 when active logging tools require surface DC/AC power.

4SSA27 & FIMT Electro-Optical Wireline Cable RFQ Ordering Checklist

  • Cable architecture: pure optical armoured wireline (FIMT-OW125, FIMT-OW250, 4SSA27), hybrid copper + optical wireline (FIMT-EO32, FIMT-EO46) or non-metallic aramid-PUR (FIMT-6XM383).
  • Optical fibre count and mix inside the FIMT (for example 2 SM + 2 MM 50/125 µm for combined DAS + Raman DTS, or 12 x G.657.A1 SM on 4SSA27).
  • Maximum bottomhole temperature and hydrogen exposure (150 °C acrylate, 200 °C carbon/PFA or 300 °C hermetic carbon/polyimide).
  • Target outer diameter, minimum breaking load (kN) and armour metallurgy (GIPS galvanized steel vs S75 / MP35N sour-service alloy).
  • Continuous splice-free length per drum (MOQ 50 m; lead time 7 to 45 working days) plus required OTDR test wavelengths.

Related selection resources

4SSA27 & FIMT Electro-Optical Wireline Cable Frequently Asked Questions

What optical fibre combination should be specified inside a 4SSA27 or FIMT-EO wireline cable for simultaneous DTS and DAS logging?

2 single-mode fibres (ITU-T G.657.A1 or pure-silica 1550 nm) paired with 2 graded-index 50/125 µm multimode fibres inside one 2.4 to 2.54 mm laser-welded FIMT is the standard dual-sensing configuration: single-mode fibres drive coherent Rayleigh DAS/VSP interrogators while 50/125 µm multimode fibres serve Raman DTS temperature boxes.

How do 4SSA27 and FIMT-EO downhole cables prevent optical hydrogen darkening above 150 °C?

3 concentric barriers protect the glass core: a seamless laser-welded 316L stainless-steel or Alloy 825 metallic tube blocks bulk gas permeation, hydrogen-scavenging gel absorbs trace H2, and hermetic pyrolytic carbon + polyimide coatings on pure-silica fibres operate continuously up to 300 °C.

Can FIMT-EO46 hybrid electro-optical wireline run on a standard 15/32 inch (11.80 mm) heptacable logging drum?

Yes. FIMT-EO46 maintains the exact 11.80 ± 0.10 mm (15/32 in) outer diameter and 90 kN contra-helical steel armour envelope of a standard W7BPP-11.8 / 7J46 heptacable, replacing only the central core with a laser-welded 6-fibre FIMT surrounded by six 20 AWG copper power conductors.

When is non-metallic FIMT-6XM383 aramid-reinforced PUR cable preferred over steel-armoured 4SSA27?

0% ferromagnetic steel content makes FIMT-6XM383 (14.30 mm OD, 18 kN aramid braid, 2x1.5 mm² + 2x2x0.34 mm² + 4SM FIMT) essential for borehole electromagnetic (TEM/borehole radar) surveys where galvanized steel wire armour would distort downhole magnetic induction fields.

What are the minimum order quantity and delivery lead time for 4SSA27 and FIMT-EO optical logging cables?

50 m minimum order quantity (MOQ), with a production lead time of 7 to 45 working days and factory 1310/1550 nm or 850/1300 nm OTDR test reports included per reel.

Specifications

4SSA27 & FIMT-EO Dimensional, Optical, Thermal & Tensile Specifications

4SSA27 & FIMT-EO Key Fibre, Temperature, Voltage & Breaking-Load Summary

  • Pure optical & hybrid EO wireline: Covers pure FIMT optical wirelines (3.18 to 8.00 mm, including 4SSA27 12SM) and hybrid copper + FIMT logging cables (8.18 to 14.30 mm)
  • Hydrogen-resistant 150–300 °C fibres: Mid-temp acrylate (150 °C), carbon/silicone/PFA (200 °C) and hermetic carbon/polyimide pure-silica SMF & 50/125 µm MMF rated to 300 °C
  • Laser-welded 316L & Alloy 825 FIMT: Seamless laser-welded metallic micro-tubes with hydrogen-scavenging gel withstand downhole hydrostatic pressures up to 100–140 MPa
  • DTS, DAS & real-time HD logging: Enables distributed temperature sensing (DTS), distributed acoustic sensing (DAS), microseismic VSP and gigabit downhole imaging
  • Winch-ready splice-free lengths: Minimum order quantity 50 m (calibration coils through continuous 3,000 to 8,500 m slickline/wireline drums) in 7 to 45 working days
4SSA27 & FIMT-EO Armoured Fiber-Optic & Hybrid Electro-Optical Wireline Logging Cable (DTS / DAS) technical data
ParameterValue
Rated voltageOptical-only dielectric core on 4SSA27 and FIMT-OW; 500 V to 1,200 V DC on hybrid copper-plus-fibre FIMT-EO builds
Optical fibre counts and modes1 to 12 fibres per FIMT combining ITU-T G.657.A1 / pure-silica 1550 nm SMF and 50/125 µm or 62.5/125 µm graded-index MMF
Fibre thermal and H2 protection150 °C mid-temp acrylate, 200 °C hermetic carbon/silicone/PFA, or 300 °C hermetic carbon/polyimide in hydrogen-scavenging gel
Outer diameter and breaking load3.18 mm (1/8 in, 8.5 kN), 6.35 mm (1/4 in, 28 kN), 6.60 mm (4SSA27, 31 kN), 8.18 mm (52 kN), 11.80 mm (90 kN) and 14.30 mm
Minimum bend diameter and supply250 mm to 610 mm minimum sheave diameter with MOQ 50 m and 7 to 45 working days manufacturing lead time
FIMT tube & armour metallurgy316L stainless steel or Alloy 825 (UNS N08825) FIMT inside preformed GIPS steel, S75/MP35N sour-service alloy or aramid-PUR armour
Optical attenuation benchmark<= 0.4 to 0.8 dB/km at 1550 nm (SMF) and <= 3.0 / 1.2 dB/km at 850 / 1300 nm (50/125 µm carbon/polyimide MMF, > 300 MHz·km)

4SSA27 & FIMT-EO Optical and Hybrid Wireline Dimensional & Tensile Schedule

4SSA27 & FIMT-EO Armoured Optical and Hybrid Electro-Optical Wireline Logging Cables — Dimensional & Mechanical Schedule
Model & Wireline ArchitectureNominal OD (mm)Optical FIMT & Electrical CoreTemp. Class (°C)Armour / Outer PackageWeight in Air (kg/km)Min. Sheave | Breaking Load (mm | kN)Next step
FIMT-OW125 Slim Optical Wireline (1/8 in)3.18 ± 0.081–4 SM/MM in 1.8 mm 316L/825 FIMT150 / 200 / 3002-Layer Preformed GIPS or Alloy SWA42250 | 8.5Request this size
FIMT-OW250 Optical Wireline (1/4 in)6.35 ± 0.104–8 SM/MM in 2.4 mm 316L/825 FIMT + Buffer150 / 200 / 3002-Layer Preformed GIPS or MP35N SWA165355 | 28.0Request this size
4SSA27 12SM Armoured Optical Borehole6.60 ± 0.1012xG.657.A1 SM in 2.54 mm SS FIMT + PE80 / 1502-Layer Contra-Helical Hot-Dip Galv. SWA185360 | 31.0Request this size
4SSA27-80 Heavy Optical FIMT Wireline8.00 ± 0.104–12 SM/MM in 2.8 mm SS FIMT + PP/ETFE150 / 2322-Layer Preformed GIPS SWA268430 | 48.0Request this size
FIMT-EO32 Hybrid 2C+4F Wireline (5/16 in)8.18 ± 0.102x18 AWG Cu (1000 V) + 4F FIMT150 / 2322-Layer Preformed GIPS or Alloy SWA275460 | 52.0Request this size
FIMT-EO46 Hybrid 6C+6F Wireline (15/32 in)11.80 ± 0.106x20 AWG Cu (1200 V) + Center 6F FIMT150 / 232 / 26020/26 Preformed GIPS or MP35N SWA505550 | 90.0Request this size
FIMT-6XM383 Non-Metallic Borehole EO14.30 ± 0.202x1.5 + 2x2x0.34 mm² (500 V) + 4SM FIMT90Foil/Braid Shield + Aramid Braid + Black PUR230280 | 18.0Request this size

4SSA27 & FIMT Downhole Optical Fibre Coating & Hydrogen Protection Matrix

Downhole FIMT Optical Fibre Coating, Hydrogen Resistance & Wavelength Selection Guide
Fibre Coating GradeOperating Temp. (°C)Hermetic H2 BarrierSupported Fibre GeometriesTypical Attenuation & Proof Test
Mid-Temp Dual Acrylate (MTDA)-40 to +150 °COptional Carbon + H2 Gel9/125 µm G.657.A1 SM & 50/125/245 µm MM<= 0.4 dB/km (1550 nm); >= 100 kpsi
Carbon / Silicone / PFA (CSPFA)-40 to +200 °CHermetic Carbon LayerPure-Silica 125/250–400 µm SM & 50/125 µm MM<= 0.8 dB/km (1550 nm); >= 100–150 kpsi
Hermetic Carbon / Polyimide (CP)-65 to +300 °CFull Hermetic Carbon + Pure Silica125/155 µm Pure-Silica SM & 50/125/155 µm MM<= 0.8 dB/km (1550 nm) | <= 3.0/1.2 (850/1300 nm); >= 100–200 kpsi

On 15/32 in FIMT-EO46 (11.80 mm), replacing the central 7th copper wire of a standard 6+1 heptacable with a 2.0 to 2.4 mm laser-welded 316L/Alloy 825 FIMT preserves full compatibility with standard 15/32 in winch drums, Lebus grooves and grease-injection pack-off tubes.

Above 150 °C in hydrogen-rich gas or geothermal wells, always specify pure-silica-core single-mode fibre and hermetic carbon/polyimide coating inside hydrogen-scavenging gel to prevent OH-absorption darkening at 1383 nm and 1550 nm.

Minimum order quantity is 50 m with a factory lead time of 7 to 45 working days, including full two-way OTDR attenuation traces at 1310/1550 nm (SM) or 850/1300 nm (MM) on every shipping drum.

ASCII part references: 4SSA27; 4SSA27-80; FIMT-OW125; FIMT-OW250; FIMT-EO32; FIMT-EO46; FIMT-6XM383; 6XM383; SMF-CP-125; MMF-50-CP-125.

Standards

4SSA27 & FIMT Downhole Optical Fibre, OTDR & Sour-Service Standards

4SSA27 & FIMT-EO Armoured Fiber-Optic & Hybrid Electro-Optical Wireline Logging Cable (DTS / DAS) standards and test references
Standard or specificationApplication
ITU-T G.657.A1 & Pure-Silica 1550 nm SMFMacro-bend-insensitive single-mode optical fibres maintaining low Rayleigh backscatter loss inside compact 1.8 to 2.8 mm metallic tubes.
IEC 60794-1-2 & OTDR / Hydrostatic Verification100% bi-directional OTDR continuity/attenuation testing, excess fibre length (EFL) control and laser-weld eddy-current/pressure integrity checks.
ISO 15156 / UNS N08825 & UNS R30035 MetallurgyAlloy 825 FIMT tubes and MP35N / S75 sour-service contra-helical armour options for H2S/CO2 intervention and geothermal brine wells.

Certifications and document support

TEBAOFLEX ISO 9001 quality system, OTDR optical attenuation and tensile test documentation

ITU-T G.657 — Bending-loss insensitive single-mode optical fibre characteristics for FIMT cables

ISO 15156-3 — Corrosion-resistant Alloy 825 and superalloy selection for sour downhole service

Compare by duty

Related cable options

Compare these cable options by service combination, movement, load, voltage and transmission requirement.

Engineering-led quotation

Request a cable recommendation and quotation

Send the required services, cable length, mechanical duty, environment, termination and quantity. Our team will review the application before quoting.

  • Include the product name or SKU plus the required cable length and quantity.
  • Attach a specification, drawing or data sheet when available.

    MOQ 50 m · Engineering reply within 24 hours

    By submitting this form, you agree that TEBAOFLEX may use the contact information and files provided to review and respond to your enquiry. Files are used for quotation and engineering communication related to your request. See our Privacy Policy for current data handling and retention information.

    Email or WhatsApp is enough. Please include the key cable or application details for review.