Marine & Offshore Cables TEBAOFLEX

SBD-SWA Seabed Drilling Rig, Vibrocorer, CPT & Deep-Sea Mining Steel-Armoured Umbilical Cable

SBD-SWA seabed drilling, vibrocorer, cone penetration testing (CPT) and deep-sea mining umbilical cables (4SSA49, 23SSA33, A305532, A304267, 4L-A304493 and A304613, 10.6 to 65.4 mm OD) combine 600 V to 6.6 kV subsea motor power cores, screened sensor quads and optical fibres beneath 2-layer, 3-layer or 4-layer contra-helical steel wire armour rated 89 to 1,014 kN breaking strength.

Product information
SKU
TF-SBD-SWA-UMBILICAL
Brand
TEBAOFLEX
Product overview

SBD-SWA steel-armoured seabed drilling, vibrocorer, seafloor CPT and deep-sea mining umbilical cables deliver 600 V to 6.6 kV motor power, real-time geotechnical sensor telemetry and high-speed optical video/data while supporting 89 to 1,014 kN mechanical lifting and recovery loads from geotechnical vessels and offshore mining support ships.

Unlike free-flying ROVs that hover above the bottom, seafloor geotechnical frames — including high-frequency vibrocorers, seabed cone penetrometer (CPT) rigs, robotic rotary rock drills and tracked polymetallic-nodule or trenching crawlers — land directly on rock outcrops, shell beds and cohesive marine clay. When cores jam or mud suction grips a landed frame, recovery pullouts spike far above static submerged weight while drill vibration excites severe bending fatigue at the bellmouth termination. TEBAOFLEX manufactures SBD-SWA umbilicals in both 2-layer preformed contra-helical steel wire armour (such as 23SSA33 at 26.8 mm / 280 kN) and heavy 4-layer torque-balanced steel wire armour (4L-A304493 class at 45.6 mm / 645 kN up to A304613 at 65.4 mm / 1,014 kN), with longitudinal water-swelling tapes and optional extruded HDPE or hydrolysis-resistant PUR outer jacketing.

Select SBD-SWA multi-layer steel-armoured umbilicals for seafloor coring, geotechnical rock drilling, subsea foundation piling and tracked mining/plough machinery. For standard ROV + TMS deployment winches see our EOM RM-Series Main-Lift Umbilicals, or for open-pit surface blasthole drills choose our terrestrial Blast-Hole Drilling Mast Cable.

Explore the marine, offshore and shipboard cable range for related configurations.

Construction

SBD-SWA 2-to-4 Layer Steel-Armoured Seabed Drilling Umbilical Construction

Built directly on TEBAOFLEX's multi-layer subsea armouring lines, SBD-SWA constructions pair longitudinally water-blocked XLPE/HDPE/ETFE power and sensor cores with 2 to 4 opposing layers of preformed galvanized steel wire armour.

Clean 2D engineering cross-section of SBD-SWA 4-layer steel-armoured seabed drilling umbilical cable showing central optical FIMT unit, screened geotechnical sensor pairs, outer ring of XLPE insulated copper power conductors, swelling water-blocking tape, HDPE inner sheath and four opposing galvanized steel wire armour layers
SBD-SWA 4-layer armoured cross-section: four opposing high-tensile galvanized steel wire rings protecting subsea drill power cores, screened pairs and FIMT.
SBD-SWA Seabed Drilling Rig, Vibrocorer, CPT & Deep-Sea Mining Steel-Armoured Umbilical Cable construction
ComponentMaterial and construction
1. Subsea Motor & Pump Power ConductorsTinned or bare flexible copper conductors (17 AWG / 1.0 mm² probe power up to 34 x heavy 6 to 35 mm² motor feeders) insulated with XLPE, HDPE or ETFE for 600 V, 1,000 V, 3.3 kV or 6.6 kV subsea hydraulic and vibration drives.
2. Geotechnical Sensor Pairs, Quads & CoaxesIndividually foil-and-drain screened twisted pairs/quads (0.50 to 1.5 mm²) and 35 to 75 Ω coaxial elements transmitting CPT tip-resistance, pore-pressure, inclinometer and rotary drill torque telemetry without VFD crosstalk.
3. Optical Telemetry Unit (FIMT or Tight-Buffered)Single-mode (9/125 µm) or multimode (50/125 µm) optical fibres enclosed in stainless-steel FIMT micro-tubes or heavy HDPE buffer sheaths for real-time HD subsea camera and sonar monitoring.
4. Longitudinal Water-Blocking & Inner BeddingWater-swelling semi-conductive/non-woven tapes and void fillers under an extruded UV/hydrolysis-resistant HDPE or polyurethane inner sheath preventing axial seawater migration if snagged on bedrock.
5. 2-Layer to 4-Layer Preformed Contra-Helical SWATwo, three or four concentric opposing layers of preformed high-tensile galvanized steel wires providing extreme pullout reserve (up to 1,014 kN), rock-crush immunity and zero-spin seabed touch-down.
6. Optional Polymeric Outer Abrasion JacketAvailable as bare lubricated steel wire armour (4SSA49, 23SSA33, 4L-A304493) or over-extruded with smooth high-density polyethylene (HDPE, A305532) or polyurethane (PUR) to shed sticky seabed clay.
TEBAOFLEX factory workshop close-up photograph of real 4-layer contra-helical galvanized steel wire armoured subsea drilling and exploration cable cut sample displaying four concentric opposing steel wire rings surrounding a water-blocked multi-core copper inner core
TEBAOFLEX workshop production sample: actual 4-layer contra-helical steel wire armoured seabed drilling and subsea exploration cable manufactured in-house.

SBD-SWA & SSA/A304 Geotechnical Umbilical Code Breakdown

  • SBD-SWA: Seabed Drilling Steel-Wire-Armoured hybrid power, telemetry and optical lift umbilical engineered for seafloor touchdown and breakout loads
  • 4SSA49 / 23SSA33: 10.6 mm (89 kN) light CPT probe and 26.8 mm (280 kN, 7x4+4x1+2x2x1+2x0.5+6SM) vibrocorer double-preformed steel-armoured reference builds
  • 4L-A304493: 4-layer contra-helical galvanized steel wire armoured deepwater rotary seabed drill build (45.6 mm OD, 645 kN breaking strength)
  • A304267 / A304613: large-count multi-power electro-optical seabed drill and tracked deep-sea mining crawler umbilicals rated 596 kN to 1,014 kN
Applications

SBD-SWA Seabed Rock Drill, Vibrocorer, CPT & Deep-Sea Mining Applications

Deploy SBD-SWA 2-to-4 layer steel-armoured umbilicals across offshore wind foundation surveys, subsea pipeline route coring, deepwater rock drilling and seabed mineral collection trials.

Marine geotechnical survey vessel aft crane and A-frame deploying a heavy steel seabed rock-drilling and vibrocorer frame into offshore waves suspended on a tensioned multi-layer steel-wire-armoured umbilical cable
Offshore geotechnical survey vessel lowering a seabed rock drill / vibrocorer frame on a single-lift SBD-SWA armoured umbilical.
  • High-frequency marine vibrocorers (3 m, 6 m and 12 m barrel frames) and heavy box/piston corers requiring single-cable lift + 400–1,000 V motor power.
  • Seabed Cone Penetration Testing (CPT) rigs and offshore wind monopile geotechnical site-investigation frames operating in 50 to 3,000 m water depth.
  • Remotely operated seafloor rotary rock drills coring 50 to 200 m into continental-shelf and deep-ocean hard rock formations.
  • Tracked deep-sea polymetallic nodule collectors, seafloor massive-sulfide (SMS) cutters and heavy subsea trenching ploughs.

SBD-SWA Seabed Drilling Umbilical vs ROV Main-Lift vs Surface Drill Cable

SBD-SWA Seabed Drilling/Vibrocorer Umbilical vs ROV Main-Lift vs Terrestrial Drill Mast Cable
Cable FamilyArmour & Jacket ArchitectureWater-Blocking & Crush ResistanceTarget Drilling / Mining Environment
SBD-SWA 2–4 Layer Subsea Umbilical (this page)2- to 4-layer contra-helical preformed SWA (bare or HDPE/PUR)Full hydrostatic + swelling tape waterblock (89–1,014 kN)Submerged vibrocorers, seabed CPT rigs, seafloor rock drills & crawlers
EOM RM-Series ROV Main-Lift (UMB02)2- or 3-layer high-tensile SWA optimized for AHC sheavesFIMT + gelled core (185–880 kN)Suspended work-class ROV + TMS garage deployment winches
OMB Electro-Hydraulic Umbilical (ID 6020)PUR sheath + synthetic braid over 350 bar hydraulic hosesSubsea fluid + low-voltage signal bundleSubsea tools driven by topside hydraulic power packs via hoses
Blast-Hole Drilling Mast Cable (ID 7447)Unarmoured ultra-flex rubber/TPU mast festoon cableSurface weather/oil resistant only (not hydrostatic)Dry open-pit mine rotary blasthole drill rig mast loops

Never deploy unarmoured surface mining trailing cables or hose-only bundles as load-bearing seafloor corer lift lines; seabed breakout suction requires preformed multi-layer contra-helical steel wire armour.

SBD-SWA Seabed Drilling & Vibrocorer Umbilical RFQ Specification Checklist

  • Seafloor tool type: vibrocorer, seabed CPT rig, rotary seafloor rock drill, subsea plough or tracked deep-sea mining crawler.
  • Single-cable lift mode vs separate hoist wire, submerged tool weight (kg), estimated seabed breakout pull (kN) and maximum water depth (m).
  • Motor/pump voltage (400 V, 690 V, 1,000 V, 3.3 kV or 6.6 kV), phase current (A), VFD drive details and sensor pair/quad/coax count.
  • Optical fibre count and mode (SM 9/125 µm or MM 50/125 µm) plus FIMT vs tight-buffered preference.
  • Armour preference: 2-layer vs 4-layer contra-helical steel wire armour, bare steel exterior vs smooth HDPE or PUR outer jacket.
  • Winch drum barrel diameter, sheave groove diameter, required cut length (MOQ 50 m; lead time 7 to 45 working days) and termination socket interface.

Related selection resources

SBD-SWA Seabed Drilling & Vibrocorer Umbilical Frequently Asked Questions

When is 4-layer contra-helical steel wire armour specified on an SBD-SWA seabed drilling umbilical?

4-layer contra-helical steel wire armour (such as SBD-SWA 4L-A304493) is specified when heavy seafloor rotary rock drills or deepwater coring frames require > 500 kN breaking strength alongside finer individual wire gauges for tighter sheave bending, superior zero-torque landing stability and extra radial rock-impact protection.

Can an SBD-SWA vibrocorer or CPT umbilical lift the equipment directly without a separate steel hoist wire?

Yes. SBD-SWA 23SSA33 provides a 280 kN breaking strength and 70 kN maximum safe working load (~7.1 tonnes) in a single 26.8 mm hybrid power-and-optical cable, allowing vibrocorers and seabed CPT frames to be deployed, powered and recovered on one winch drum.

Should a seabed drilling or corer umbilical use bare steel armour or an extruded HDPE / PUR outer jacket?

Bare preformed galvanized steel armour (4SSA49, 23SSA33) maximizes winch heat dissipation, cuts hydrodynamic drag and resists sharp rock cuts; add an extruded smooth HDPE or PUR outer jacket (A305532) when operating in sticky cohesive marine clay where mud clings between bare wires or where topside traction winches require a polymeric grip surface.

How does SBD-SWA 23SSA33 prevent seawater from flooding topside or subsea junction boxes if snagged?

2 longitudinal swelling water-blocking tape barriers (around the inner control cores and beneath the HDPE inner sheath) expand immediately on contact with seawater, sealing interstitial pathways across the 7x4 mm² power, 4x1 mm² control, 2x2x1 mm² screened pair and 6-fibre core.

What are the minimum order quantity and manufacturing lead time for SBD-SWA seabed drilling umbilicals?

50 m minimum order quantity (MOQ), with a factory lead time of 7 to 45 working days tailored to offshore geotechnical survey schedules (including 150 to 500 m continental-shelf winch lengths and multi-kilometer deep-sea reels).

Specifications

SBD-SWA Dimensional, Breaking-Load & Geotechnical Model Specifications

SBD-SWA Key Multi-Layer Armour, Voltage & Pullout Summary

  • 2- to 4-layer SWA builds: Double, triple and quad contra-helical galvanized steel wire armour for high-vibration seafloor coring and rocky seabed drag
  • Wide geotechnical range: From 10.6 mm / 89 kN CPT probes and 26.8 mm / 280 kN vibrocorers up to 65.4 mm / 1,014 kN deep-sea mining crawlers
  • Bare or jacketed armour: Supplied as bare preformed steel armour for maximum winch heat dissipation or over-jacketed in HDPE / PUR / TPE against mud suction
  • Water-blocked hybrid core: Longitudinal swelling tapes + gelled FIMT or HDPE-buffered single-mode/multimode fibres preventing water hosing after jacket cuts
  • Project-engineered supply: Custom conductor/sensor/fibre layups built from MOQ 50 m in 7 to 45 working days for marine survey and mining contractors
SBD-SWA Seabed Drilling Rig, Vibrocorer, CPT & Deep-Sea Mining Steel-Armoured Umbilical Cable technical data
ParameterValue
Rated voltage600 V to 1000 V AC on vibrocorer and CPT builds; 1.8/3.0 kV to 3.8/6.6 kV available on heavy seabed drill and mining crawlers
Armour layer configurations2-layer preformed contra-helical SWA (89 to 400 kN) and 3-to-4 layer heavy torque-balanced SWA (596 to 1014 kN)
Outer diameter and weight range10.6 mm (461 kg/km air) for light CPT probes up to 45.6–65.4 mm (4392–8367 kg/km seawater) for heavy seabed drills and crawlers
Water-blocking and jacket optionsSwelling water-blocking tapes + gelled FIMT; bare galvanized steel wire exterior or extruded HDPE / PUR / TPE outer sheath
Bend radius and supply terms200 to 980 mm minimum dynamic bend radius depending on OD; MOQ 50 m with 7 to 45 working days manufacturing lead time
Operating temperature envelope-20 °C to +70 °C (standard HDPE/XLPE corer builds) or -40 °C to +80 °C (ETFE/FIMT deepwater probe builds)
Pullout safety margin4:1 typical dynamic working-load ratio (for example 280 kN MBL / 70 kN max working load on 23SSA33) to absorb seabed clay breakout suction

SBD-SWA Seabed Drilling, Vibrocorer, CPT & Mining Crawler Umbilical Schedule

SBD-SWA Seabed Drilling, Vibrocorer, CPT & Deep-Sea Mining Steel-Armoured Umbilical — Reference Model Schedule
Model & Core SummaryNominal Outer Diameter (mm)Armour & Exterior FinishRated Power VoltageMass Air | Seawater (kg/km)Min. Dynamic Bend Radius (mm)Breaking | Max Working Load (kN)Next step
SBD-SWA 4SSA49 (2x17AWG+2SM FIMT)10.62-Layer Preformed SWA (Bare)1000 V461 | 37120089 | 22.25Request this size
SBD-SWA 23SSA33 (7x4+4x1+2x2x1+2x0.5+6SM)26.82-Layer Preformed SWA + Waterblock1000 V AC2066 | 1580530280 | 70.0Request this size
SBD-SWA A305532 (22-Core Drill Control)30.02-Layer SWA + Extruded HDPE Jacket1000 V AC2650 | 1890600400 | 100.0Request this size
SBD-SWA A304267 (32P+16S+4Coax+7MMF)43.6Multi-Layer SWA (Bare Lift)3000 V AC4950 | 3768870596 | 149.0Request this size
SBD-SWA 4L-A304493 (15P+3S+9SM 4-Layer)45.64-Layer Contra-Helical SWA (Bare)3300 V AC5720 | 4392910645 | 161.0Request this size
SBD-SWA A304613 (34P+8MMF+4SMF Crawler)65.4Multi-Layer Heavy Crawler SWA3300–6600 V10850 | 836713001014 | 253.0Request this size

Seabed Tool Armour Layer & Jacket Selection Matrix

SBD-SWA Armour Layer Count & Outer Sheath Engineering Guide by Seafloor Equipment Type
Seafloor Tool CategoryRecommended Armour BuildExterior FinishPrimary Mechanical Hazard Mitigated
Light Seabed CPT & Heat-Flow Probe2-Layer Preformed SWA (10.6–18 mm OD)Bare galvanized steel wireCompact survey winch spooling + high depth-to-drag ratio
Marine Vibrocorer & Box Corer (3–12 m)2-Layer Heavy Preformed SWA (24–30 mm OD)Bare SWA or smooth HDPE jacketHigh-frequency motor vibration + clay breakout pullout spikes
Robotic Seafloor Rotary Rock Drill3- or 4-Layer Torque-Balanced SWA (38–48 mm OD)4-Layer bare SWA or thick PUR jacketZero-spin landing accuracy + extreme radial crush on rocky ledges
Tracked Deep-Sea Mining & Trenching PloughMulti-Layer SWA up to 1,014 kN (45–66 mm OD)Bare heavy GIPS or abrasion-locked PUR100–250 kN tow/lift loads + abrasive polymetallic nodule contact

Preformed galvanized steel armour wires (as used on SBD-SWA 4SSA49 and 23SSA33) remain locked in place when cut or locally nicked, preventing strand unravelling during deck termination or rough seafloor coring cycles.

When specifying a seabed corer or CPT umbilical that serves simultaneously as the single lifting hoist line (single-cable mode without a separate steel hoist wire), verify that Maximum Working Load exceeds submerged frame mass plus estimated seabed mud breakout suction.

Minimum order quantity is 50 m with a production lead time of 7 to 45 working days, supporting offshore wind geotechnical campaigns (100 to 600 m shallow-shelf winches) as well as 3,000 to 5,000 m deep-ocean exploration reels.

ASCII part references: SBD-SWA 4SSA49; SBD-SWA 23SSA33; SBD-SWA A305532; SBD-SWA A304267; SBD-SWA 4L-A304493; SBD-SWA A304613; 4-layer steel wire armoured subsea drilling cable.

Standards

SBD-SWA Subsea Geotechnical Umbilical Standards & Test References

SBD-SWA Seabed Drilling Rig, Vibrocorer, CPT & Deep-Sea Mining Steel-Armoured Umbilical Cable standards and test references
Standard or specificationApplication
ISO 13628-5 & Marine Geotechnical Umbilical PracticeContra-helical steel wire armour load-sharing, torque balance and dynamic bend-over-sheave mechanical design.
IEC 60228 & IEC 60502-1 / 60502-2Stranded copper conductor DC resistance (for example <= 5.09 Ω/km on 4.0 mm² XLPE power cores in 23SSA33) and AC/DC dielectric routine testing.
ITU-T G.652.D / IEC 60794-1-2Optical attenuation and hydrostatic crush qualification on single-mode and multimode optical telemetry fibres.
Longitudinal Water-Blocking IntegritySwelling water-blocking tapes across core layers restricting axial seawater ingress toward subsea junction boxes and slip rings.

Certifications and document support

TEBAOFLEX ISO quality assurance and routine dielectric/optical factory test reports

ISO 13628-5 — Subsea umbilical mechanical, electrical and optical verification reference

Compare by duty

Related cable options

Compare these cable options by service combination, movement, load, voltage and transmission requirement.

Engineering-led quotation

Request a cable recommendation and quotation

Send the required services, cable length, mechanical duty, environment, termination and quantity. Our team will review the application before quoting.

  • Include the product name or SKU plus the required cable length and quantity.
  • Attach a specification, drawing or data sheet when available.

    MOQ 50 m · Engineering reply within 24 hours

    By submitting this form, you agree that TEBAOFLEX may use the contact information and files provided to review and respond to your enquiry. Files are used for quotation and engineering communication related to your request. See our Privacy Policy for current data handling and retention information.

    Email or WhatsApp is enough. Please include the key cable or application details for review.