



RS726 & RS935 Work-Class ROV, Pontoon & Winch Electro-Optical Umbilical & Deck Cable (3.3–4.5 kV)
RS726 and RS935 electro-optical umbilical and companion FMBP deck cables combine 1.8/3.0 (3.3) kV or 2.4/4.2 (4.5) kV medium-voltage power cores, low-voltage auxiliary/quad control circuits and laser-welded stainless-steel tube single-mode optical fibres inside either contra-helical Zn-5Al steel wire armour (41.0 mm / 670 kN; 28.6 mm / 340 kN) or galvanized steel-tape flame-retardant PVC deck armour (35.0 mm / 25.4 mm OD).
RS726 and RS935 electro-optical umbilical and FMBP deck cables deliver medium-voltage 3-phase hydraulic power (1.8/3.0 kV Um 3.3 kV or 2.4/4.2 kV Um 4.5 kV), vehicle/cage auxiliary power, screened telemetry quads and 8 to 12 single-mode optical fibres between topside power distribution, launch-and-recovery winches, floating pontoons and 150 to 250 HP work-class ROV spreads.
Offshore pontoon installations and ROV handling spreads require two mechanically distinct cables built around one electrically identical inner core. In the RS726 system (Gs(12)+9x16mm²+5x4mm²+A2-0.35mm²), nine 16 mm² HPU/TMS power cores, five 4 mm² vehicle/cage cores, a central 4×0.35 mm² screened quad and a 12-fibre laser-welded stainless-steel FIMT element are laid inside an orange 31.0 mm thermoplastic polyester inner sheath. Adding two contra-helical Zn-5Al steel wire layers (36×2.6 mm + 46×2.4 mm) produces the 41.0 mm, 670 kN dynamic umbilical (FMV-RP2.6/2.4), while wrapping dual 0.2 mm galvanized steel tapes and a black flame-retardant PVC jacket produces the 35.0 mm topside deck jumper (RS726-DC FMBP) linking deck HPU transformers to winch slip-ring junction boxes.
Specify RS726 or RS935 whenever replacing a damaged pontoon umbilical, commissioning a topside deck jumper or ordering a 50 to 1,000 m spare drum that must match existing Lebus drum grooves, A-frame sheaves and stuffing-tube glands without re-machining hardware. For bare deepwater main-lift cables up to 880 kN see our RM-Series EOM ROV Main-Lift Umbilicals, or for hose-integrated reels select our OMB Subsea Electro-Hydraulic Umbilicals.
Explore the marine, offshore and shipboard cable range for related configurations.
RS726 & RS935 Companion Umbilical (FMV-RP) & Deck Cable (FMBP) Construction
The RS726 family shares a precision 31.0 mm orange thermoplastic polyester inner electro-optical core (with 16 kV DC / 5 min factory routine test on all 1.8/3.0 kV power cores) finished with either dual contra-helical Zn-5Al steel wire armour for dynamic submerged lifting or dual galvanized steel tape plus flame-retardant PVC outer sheathing for topside deck routing.

| Component | Material and construction |
|---|---|
| 1. Central Screened Quad (UNIT-SQ) | Four 0.35 mm² stranded copper conductors (7x0.25 mm, PP insulated to 1.4 mm: Blue/Red and White/Green pairs), jelly-filled with PET tape, 8x0.2 mm drain wires, Al/PET screen and natural PP sheath (4.6 mm OD; loop resistance <= 118 Ω/km). |
| 2. First Layer — 5x4 mm² Auxiliary Power + Gs(12) FIMT | Five 4 mm² power cores (7x0.88 mm Cu, semiconducting PP + colour-coded insulating PP to 4.0 mm, rated 1.8/3.0 kV Um 3.3 kV) laid right-hand with one Gs(12) 2.3 mm laser-welded stainless-steel tube housing 12 single-mode 9/125 µm fibres sheathed to 4.0 mm, 6x0.5 mm² screen wires and natural PP sheath (13.9 mm OD). |
| 3. Second Layer — 9x16 mm² Main HPU & TMS Power | Nine 16 mm² stranded copper conductors (7x1.78 mm, 4.8 mm conductor OD, semiconducting PP + colour-coded PP insulation to 6.5 mm for Forward HPU, Aft HPU and Cage TMS 3-phase groups) laid right-hand with 9x1.0 mm² screen wires and screen tape to 27.1 mm. |
| 4. Shared Inner Sheath (31.0 mm Nominal OD) | Extruded high-strength orange thermoplastic polyester elastomer inner sheath sealing the electrical-optical core bundle against radial crush and moisture ingress. |
| 5A. Umbilical Armour Package (FMV-RP2.6/2.4 — 41.0 mm OD) | PUR bedding tape, 1st armour layer of 36 x 2.6 mm Zn-5Al alloy-coated steel wires (right lay, 36.2 mm), corrosion-blocking lubricant, PUR separator tape and 2nd armour layer of 46 x 2.4 mm Zn-5Al steel wires (left lay, 41.0 ± 0.5 mm OD). |
| 5B. Companion Deck Package (FMBP — 35.0 mm OD) | Dual 0.2 mm galvanized steel tapes (< 20% gap, 32.0 mm OD) covered by a 1.5 mm black flame-retardant, oil- and UV-resistant PVC outer sheath (35.0 ± 1.0 mm OD) for fixed topside tray and pontoon deck runs. |

RS726 / FMV-RP / FMBP Designation & Core Code Breakdown
- Gs(12) / 2xGs(4): gel-filled laser-welded stainless-steel tube optical element containing 12 single-mode fibres (RS726) or two tubes of 4 single-mode fibres (RS935)
- 9x16mm² + 5x4mm²: nine 16 mm² 3-phase main HPU/TMS power conductors plus five 4 mm² vehicle/cage auxiliary power conductors (rated 1.8/3.0 kV, Um 3.3 kV)
- A2-0.35mm² (4x0.34): central screened telecommunications quad comprising two pairs (4 x 0.35 mm² / ~22 AWG) with drain wires and Al/PET foil shield
- FMV-RP2.6/2.4: subsea dynamic umbilical finish with thermoplastic polyester inner sheath and contra-helical 2.6 mm inner / 2.4 mm outer Zn-5Al steel wire armour
- FMBP: companion topside deck cable finish applying dual 0.2 mm galvanized steel tapes and black flame-retardant PVC outer sheath over the identical inner core
RS726 & RS935 Pontoon, Work-Class ROV Winch & Topside Deck Applications
Deploy RS726 and RS935 electro-optical umbilicals and companion FMBP deck cables across offshore support vessels, floating pontoons, barge-mounted work-class ROV spreads and topside winch-to-transformer interconnections.

- Floating pontoon, linkspan barge and nearshore marine construction projects requiring exact-OD spare electro-optical umbilical cables in 100 to 600 m cut lengths.
- 150 to 250 HP work-class ROV and Tether Management System (TMS) main deployment winches supplying dual 3-phase HPU motors plus cage power at 3.0 to 4.5 kV.
- Topside FMBP armoured deck jumper cables connecting HV transformer containers and HPU control vans to LARS winch slip-ring junction boxes with identical core colour coding.
- Drop-in 1:1 outer-diameter replacement of aged RS726, RS379 and RS935 cables without changing Lebus drum shells, overboarding sheaves or mechanical socket terminations.
RS726 FMV-RP Umbilical vs FMBP Deck Cable vs Synthetic Tether Boundary
| Cable Type | Outer Protection | Outer Diameter & Weight | Where to Specify |
|---|---|---|---|
| RS726 FMV-RP2.6/2.4 Umbilical (this page) | 2-layer contra-helical Zn-5Al steel wire armour | 41.0 mm OD | 5,800 kg/km air | Submerged ROV main lift, floating pontoon catenary & LARS winch drum |
| RS726-DC FMBP Deck Cable (this page) | 2x0.2 mm galv. steel tape + black FR-PVC sheath | 35.0 mm OD | 2,800 kg/km air | Topside deck tray jumper from HPU/transformer van to winch slip-ring box |
| RS935 FMV-RP (2- or 3-Layer SWA, this page) | 2- or 3-layer Zn-5Al steel wire armour (4.5 kV) | 28.6 mm OD | 2,600 kg/km air | Compact 4.5 kV work-class ROV winches requiring smaller 850 mm bend diameter |
| Synthetic Aramid/LCP ROV Tether (ID 6024) | Braided synthetic strength member + PUR jacket | 18 to 38 mm OD | neutrally or lightly negative in water | TMS cage-to-ROV horizontal excursion tether where steel weight is prohibitive |
Never spool PVC-sheathed FMBP deck cable onto dynamic overboarding sheaves, and avoid running bare greased FMV-RP steel wire armour across enclosed topside accommodation cable trays where flame-retardant PVC jacketing is required.
RS726 & RS935 Spare Umbilical & Deck Cable RFQ Ordering Checklist
- Cable duty & model code: submerged armoured umbilical (RS726 FMV-RP2.6/2.4 or RS935 FMV-RP), topside deck jumper (FMBP), or matched umbilical + deck pair.
- Target outer diameter & tolerance (for example 41.0 ± 0.5 mm or custom groove-matched OD) plus existing Lebus winch groove pitch and minimum sheave root diameter.
- Electrical core count, conductor cross-sections (such as 9x16 + 5x4 + 4x0.35 mm²) and rated phase-to-earth / phase-to-phase voltage (1.8/3.0 kV, 2.4/4.2 kV or custom).
- Optical fibre count, mode (ITU-T G.652.D SM or OM2/OM3 MM) and stainless-steel FIMT tube count (1x12SM, 2x4SM or redundant dual tubes).
- Required minimum breaking load (kN), safe working load at copper yield (kN) and maximum operating water depth.
- Continuous drum cut length (MOQ 50 m; lead time 7 to 45 working days), shipping reel flange limits and factory test / third-party witness requirements.
Related selection resources
- Marine, offshore and subsea cable product catalog
- Custom subsea and marine umbilical engineering solutions
- Synthetic-Armoured ROV Excursion Tether & Trencher Umbilical Cable (250 V–3 kV)
- OMB Series Subsea Electro-Hydraulic & Hose-Bundle Hybrid Umbilical Cable
- Offshore vessel, pontoon and deck power-control cable systems
- Project record: 300 m / 41.0 mm OD spare umbilical & deck cable for a Southeast Asia pontoon
- Engineering guide: matching replacement umbilical OD to Lebus winch grooves and sheaves
- Selection guide: ROV main-lift umbilical vs excursion tether vs topside deck cable
RS726 & RS935 Umbilical and Deck Cable Frequently Asked Questions
Can TEBAOFLEX manufacture a 300 m spare RS726 umbilical cable matching the exact 41.0 mm outer diameter?
Yes. TEBAOFLEX manufactures custom and replacement RS726-class electro-optical umbilicals (Gs(12)+9x16+5x4+A2-0.35 / 9x16+5x4+4x0.34+12FO) from a 50 m minimum order quantity with outer diameter controlled to 41.0 ± 0.5 mm so 100 to 500 m pontoon or ROV spare lengths fit existing Lebus winch grooves, sheaves and mechanical terminations without hardware modification.
What is the difference between RS726 FMV-RP2.6/2.4 umbilical cable and RS726-DC FMBP deck cable?
6.0 mm in outer diameter and 670 kN vs 1 kN tensile rating. Both cables share the identical 31.0 mm orange polyester electro-optical core (9x16 + 5x4 + 4x0.35 mm² + 12SM), but FMV-RP2.6/2.4 adds two contra-helical Zn-5Al steel wire armour layers (41.0 mm OD, 5.8 kg/m, 670 kN breaking strength) for dynamic subsea lifting, whereas FMBP applies dual 0.2 mm galvanized steel tapes and a black flame-retardant PVC jacket (35.0 mm OD, 2.8 kg/m) for static topside deck routing.
Is 9x16+5x4+4x0.34+12FO the same core configuration as Gs(12)+9x16mm²+5x4mm²+A2-0.35mm² in RS726?
Yes. In RS726 engineering documentation, A2-0.35mm² denotes one screened star-quad of four 0.35 mm² (7x0.25 mm, ~22 AWG / 0.34 mm² nominal) signal conductors and Gs(12) denotes 12 single-mode optical fibres inside a gel-filled laser-welded stainless-steel tube, combined with nine 16 mm² and five 4 mm² 1.8/3.0 (3.3) kV power conductors.
When should 3-layer armoured RS935 (FMV-RP1.0/1.2/1.4) be chosen over 2-layer RS935 (FMV-RP2.0/1.6)?
28.6 mm OD and 340 kN breaking strength are identical on both RS935 options, but the 3-layer armour build (65x1.0 + 59x1.2 + 56x1.4 mm wires) uses finer wire diameters to achieve superior torque balance under high-cycle active heave compensation (AHC) flexing, whereas 2-layer 34x2.0 + 48x1.6 mm provides thicker outer wires against external seabed and pontoon chafe.
What are the minimum order quantity and production lead time for RS726 and RS935 umbilical and deck cables?
50 m minimum order quantity (MOQ), with a factory manufacturing lead time of 7 to 45 working days depending on stainless-steel FIMT fibre count and Zn-5Al armour wire stranding schedule.
RS726 & RS935 Dimensional, Electrical, Optical & Tensile Specifications
RS726 & RS935 Key Mechanical, Voltage & Replacement Summary
- Companion twin-build system: Shared 31.0 mm (RS726) or 21.4 mm (RS935) inner core finished as FMV-RP steel-wire umbilical or FMBP topside deck cable
- Exact 1:1 spare OD matching: 41.0 ± 0.5 mm (RS726), 35.0 ± 1.0 mm (RS726-DC) and 28.6 ± 1.0 mm (RS935) to fit existing Lebus winch grooves and sheaves
- Composite core architecture: 9x16 + 5x4 + 4x0.35 mm² + Gs(12) 12SM FIMT on RS726; 6x8 + 4x1 mm² + 2xGs(4) 8SM FIMT on RS935
- Mechanical lift ratings: 670 kN breaking / 190 kN yield load on RS726 (600 mm dynamic bend radius); 340 kN breaking / 100 kN yield on RS935
- Short-run replacement supply: Minimum order quantity 50 m (including 100 to 500 m pontoon and deck spares) manufactured in 7 to 45 working days
| Parameter | Value |
|---|---|
| Rated voltage | 1.8/3.0 kV (Um 3.3 kV) on RS726 power cores and 2.4/4.2 kV (Um 4.5 kV) on RS935 power cores |
| Composite core architecture | 9x16 + 5x4 + 4x0.35 mm² + 12SM FIMT (RS726) or 6x8 + 4x1 mm² + 2x4SM FIMT (RS935) |
| Armour and jacket options | Contra-helical Zn-5Al steel wire armour (FMV-RP) for subsea lift or galvanized steel tape + PVC (FMBP) for deck |
| Outer diameter and tensile rating | 41.0 mm OD / 670 kN breaking load (RS726 umbilical), 35.0 mm OD (RS726 deck), 28.6 mm OD / 340 kN (RS935) |
| Dynamic bend radius and supply | 600 mm (RS726), 350 mm (RS726-DC), 425 mm (RS935) minimum bend radius with MOQ 50 m in 7 to 45 working days |
| Optical fibre performance | ITU-T G.652.D 9/125 µm single-mode fibres in gel-filled laser-welded stainless-steel tube (<= 0.6 dB/km at 1310 nm, <= 0.4 dB/km at 1550 nm) |
| Routine factory dielectric tests | 16 kV DC / 5 min on 16 mm² and 4 mm² MV cores; 2.5 kV DC / 10 s on 0.35 mm² quad; insulation resistance > 5 GΩ·km |
RS726 & RS935 Umbilical and Companion FMBP Deck Cable Schedule
| Model & Core Configuration | Nominal Outer Diameter (mm) | Power Voltage Rating (kV) | Armour / Outer Protection | Weight Air | Seawater (kg/km) | Min. Dynamic Bend Radius (mm) | Breaking | Yield Load (kN) | Next step |
|---|---|---|---|---|---|---|---|
| RS726 FMV-RP2.6/2.4 (Gs(12)+9x16+5x4+A2-0.35) | 41.0 ± 0.5 | 1.8/3.0 (3.3) | 36x2.6 + 46x2.4 mm Zn-5Al SWA | 5800 | 4400 | 600 | 670 | 190 | Request this size |
| RS726-DC FMBP Deck (Gs(12)+9x16+5x4+A2-0.35) | 35.0 ± 1.0 | 1.8/3.0 (3.3) | 2x0.2 mm Galv. Steel Tape + FR-PVC | 2800 | N/A (Deck) | 350 | N/A | 1.0 SWL | Request this size |
| FMV-RP2.0/1.6 RS935 (2xGs(4)+6x8+4x1) | 28.6 ± 1.0 | 2.4/4.2 (4.5) | 34x2.0 + 48x1.6 mm Zn-5Al SWA | 2600 | 2000 | 425 | 340 | 100 | Request this size |
| FMV-RP1.0/1.2/1.4 RS935-3A (2xGs(4)+6x8+4x1) | 28.6 ± 1.0 | 2.4/4.2 (4.5) | 65x1.0 + 59x1.2 + 56x1.4 mm 3-Layer SWA | 2600 | 2000 | 425 | 340 | 100 | Request this size |
| FMV-DC RS935 FMBP Deck (2xGs(4)+6x8+4x1) | 25.4 ± 1.0 | 2.4/4.2 (4.5) | 2x0.2 mm Galv. Steel Tape + FR-PVC | 1350 | N/A (Deck) | 260 | N/A | 1.0 SWL | Request this size |
RS726 Sub-Element Electrical, Dielectric & Optical Test Data
| Internal Element Code | Count & Cross-Section | Stranding & Core OD (mm) | Circuit Allocation & Colour Code | Max. DC Resistance at 20 °C (Ω/km) | Routine HV Test & Optical Limit |
|---|---|---|---|---|---|
| UNIT-P16 (2nd Layer) | 9 x 16 mm² | 7x1.78 Cu | 6.5 mm PP | Fwd HPU (Bu/Rd/Aq), Aft HPU (Wh/Gy/Pk), TMS (Gn/Ye/Og) | 1.27 | 16 kV DC / 5 min; IR > 5 GΩ·km |
| UNIT-P4 (1st Layer) | 5 x 4 mm² | 7x0.88 Cu | 4.0 mm PP | Cage 1 (Bu), Veh 1 (Wh), Spare (Gn), Cage 2 (Rd), Veh 2 (Og) | 5.20 | 16 kV DC / 5 min; IR > 5 GΩ·km |
| UNIT-SQ (Centre Quad) | 4 x 0.35 mm² (2 Pairs) | 7x0.25 Cu | 4.6 mm Sheath | Pair 1 (Blue/Red), Pair 2 (White/Green) + Al/PET screen | 118.0 (loop) | 2.5 kV DC / 10 s; IR > 5 GΩ·km |
| UNIT-FO Gs(12) FIMT | 12 x SM 9/125 µm | 2.3 mm SS Tube | 4.0 mm PP | 12 colour-coded SM fibres (#1-#6 25 mm ring, #7-#12 50 mm) | N/A (Optical) | <= 0.6 dB/km (1310 nm) | <= 0.4 dB/km (1550 nm) |
Minimum dynamic bending diameter is 1,200 mm (600 mm bend radius, approximately 14.6 x OD) for RS726 FMV-RP2.6/2.4 under tension over A-frame and traction sheaves, and 700 mm (350 mm bend radius) for the companion RS726-DC FMBP topside deck cable.
In customer BOMs where the central screened quad is rounded by wire gauge conversion, Gs(12)+9x16mm²+5x4mm²+A2-0.35mm² is frequently written as 9x16+5x4+4x0.34+12FO — both designations share the exact 31.0 mm inner core and 41.0 mm armoured outer diameter.
Minimum order quantity is 50 m with a production lead time of 7 to 45 working days on export steel or reinforced wooden drums, enabling economical 150 to 500 m pontoon and deck spares without 2,000 m mill minimums.
ASCII part references: RS726; RS726-TD-02E; RS726-DC; RS379-TD-10E; RS935; FMV-RP2.6/2.4; FMV-RP2.0/1.6; FMV-RP1.0/1.2/1.4; FMBP; Gs(12)+9x16+5x4+A2-0.35; 9x16+5x4+4x0.34+12FO.
RS726 & RS935 Subsea Umbilical Standards & Routine Factory Test References
| Standard or specification | Application |
|---|---|
| ISO 13628-5 / API Spec 17E | Design, contra-helical armour load-sharing, torque-balance and verification architecture for subsea electro-optical control and ROV umbilicals. |
| IEC 60228 & Semiconducting PP MV Core Design | Stranded copper conductors with extruded semiconducting stress-control and polypropylene insulation tested at 16 kV DC for 5 minutes. |
| ITU-T G.652.D & Laser-Welded FIMT | Single-mode 9/125 µm optical fibres housed in gel-filled 316L stainless-steel tubing (0.2 mm wall) resisting hydrostatic crush and hydrogen ingress. |
| IEC 60332-1-2 (FMBP Deck Sheath) | Flame-retardant black PVC outer jacket over dual galvanized steel tapes for topside deck cable runs between HPU containers and winch slip rings. |
Certifications and document support
TEBAOFLEX ISO quality management, 16 kV DC dielectric and OTDR optical test documentation
ISO 13628-5 — Petroleum and natural gas industries: Subsea umbilicals design and testing reference
ITU-T G.652 — Characteristics of single-mode optical fibre and cable for FIMT subsea telemetry
Related cable options
Compare these cable options by service combination, movement, load, voltage and transmission requirement.
DFP-EO & DFP-EOB Dredger, Floating Pontoon & Barge Dynamic Power-Optical Umbilical Cable
A related cable option for a different application or duty profile.
View productRM-Series & EOM Torque-Balanced Steel-Armoured Work-Class ROV Main-Lift Umbilical Cable (1–4.5 kV)
A related cable option for a different application or duty profile.
View productSBD-SWA Seabed Drilling Rig, Vibrocorer, CPT & Deep-Sea Mining Steel-Armoured Umbilical Cable
A related cable option for a different application or duty profile.
View productRequest a cable recommendation and quotation
Send the required services, cable length, mechanical duty, environment, termination and quantity. Our team will review the application before quoting.
- Include the product name or SKU plus the required cable length and quantity.
- Attach a specification, drawing or data sheet when available.





